Coaster 804294 User manual

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
1. Position the furniture against the wall in the desired location and mark the position of
where you will secure the other end on the wall.
2. Drill a 1-1/4" hole in the spot you marked.
against the wall surface.
4. Position the bracket over the wall plug and use the screw to securely attach the bracket to the wall.
5. Lace an end of the cable tie down through bracket and the furniture. Bring both ends together and
slide the beaded end of the cable tie through the keyhole shaped slot on the other end until snug.
Pull down on the beaded end until it snap locks into the keyhole slot.
6. To double lock return the beaded end back through the keyhole as shown.
7. Check to make sure the cable tie is securely laced and locked to the brackets.
PAGE 3 OF 3
3. Press the plastic wall plug into the hole and gently tap until the flange on the wall plug is
WARNING
FURNITURE TIPPING RESTRAINT
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
PAGE 6 OF 6