Coaster 460234N User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
460234N (B1-B3)
Twin/Twin Bunk Bed
COASTERFURNITURE.COM
REVISION 0 : 04/12/2018
REVISION 1 : 08/30/2018
PAGE 1 OF 7
REVISION 2 : 04/20/2020

PAGE 2 OF 7
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ASSEMBLY INSTRUCTIONS
ITEM: 460234N (B1-B3)
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY TIPS:
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
B1 (BOX 1)
1PC
A2PCS
C
B
2PCS
FRONT GUARDRAIL
COASTERFURNITURE.COM
1PC
B2 (BOX 2)
UPPER BED
BACK BED RAIL
(WITH 2 HOLES)
D
LOWER BED
FRONT BED RAIL
(WITH 2 HOLES
LOWER BED
BACK BED RAIL
BACK
GUARDRAIL
UPPER BED
FRONT BED RAIL
(WITH 3 HOLES)
E
F
G
H
RIGHT LADDER
STILE
LADDER STEP
FLAT
GUARDRAIL
SUPPORT
LEFT LADDER
STILE
I
JF
KF
LF
M
1PC
1PC
1PC
1PC
2PCS
ROLL SLAT
(14PCS)
B3 (BOX 3)
N2SETS
1PC
1PC
3PCS
3PCS
RIGHT UPPER
BED END
LOWER BED END
LEFT UPPER
BED END

ASSEMBLY INSTRUCTIONS
ITEM: 460234N (B1-B3)
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY TIPS:
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 7 COASTERFURNITURE.COM
HARDWARE IDENTIFICATION
Z-B2 (BOX2) - HARDWARE PACK IS LOCATED IN 460234N (B2)
LONG BOLT
WOOD DOWEL
BARREL NUT
SHORT BOLT
122PCS
2
37
4
FLAT HEAD SCREW
(4 x 35mm - BLK)
5
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
6METAL DOWEL
(12 x 125mm - BLK )
ALLEN WRENCH
(M4 - BLK)
(1/4 x 70 x13mm - BLK)
(1/4 x 13mm - BLK) 22PCS
14PCS
24PCS
16PCS
4PCS
1PC
(10 x 40mm)
(1/4 x 35 x 13mm - BLK)

PAGE 4 OF 7
ASSEMBLY INSTRUCTIONS
ITEM: 460234N (B1-B3)
STEP 1
STEP 3
COASTERFURNITURE.COM
LOWER BED END
STEP 2
UPPER BED END
C
G
C
F
3
2
7
1
6
6
6
6
B
H
3
2
7
1
D
EA
3
2
7
1
74
7
4
4
4
4
4
4
JF
LF KF
LF
LF

PAGE 5 OF 7
ASSEMBLY INSTRUCTIONS
ITEM: 460234N (B1-B3)
COASTERFURNITURE.COM
STEP 5 STEP 6
COMPLETE
STEP 7 STEP 8
4
7
2
31
I
I
I
4
7
5NM
4
7
N
5N
N
M
7

ASSEMBLY INSTRUCTIONS
STRANGULATION HAZARD:
REPLACEMENT PARTS
SIZE OF MATTRESS
The length and width of the bunk mattress are as follow:
Ensure thickness of mattress does not exceed 6” and there must be at least 5” from mattress
sleeping surface to top edge of guardrail.
1. Follow the information on the warnings appearing on the upper bunk end structure and
on the carton. Do not remove the warning label from bed.
2. Always use the recommended size mattress or mattress support or both to help prevent
the likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrail, ladder, and other components are in
their proper position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using upper bunk.
11. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and wall.
12. The use of water or sleep otation mattress is prohibited.
13. Keep these instructions for future reference.
14. Never attach or hang items to any part of the bunk bed that are not designed for use with
the bed for example, but not limited to hooks, belts, and jump ropes.
Replacement parts, including additional guardrails may be obtained from any COASTER
Furniture Dealer.
Upper bunk
Lower Bunk
SAFETY WARNING
Length Width Thickness
74” -75”
74” -75”
37 1/2”- 38 1/2” 6” Maximum
6” Maximum
ITEM:460234N (B1-B3)
PAGE 6 OF 7
37 1/2”- 38 1/2”

ASSEMBLY INSTRUCTIONS
ITEM:
460234N (B1-B3)
WARNING
TO PREVENT SERIOUS OR FATAL INJURY
1. When using beds as bunk beds, the ladder MUST be securely attached to the upper
bunk rail at all times.
2. When using the beds as two (2) separate oor-standing beds, the ladder MUST be stored
in a separate location where children cannot use the ladder in any manner.
3. DO NOT use, nor permit children to use, the ladder in any manner whatsoever, other
than to access the top unit when used as bunk beds, and only if the ladder is securely
attached to the top bunk rail, as set forth in the instructions.
4. Any misuse or unauthorized use of the ladder could result in serious or fatal injury.
5 Failure to follow the above WARNING, and/or failure to follow assembly instructions
completely, will void any and all liability of COASTER COMPANY OF AMERICA for
damages and injury to persons and property.
Coasterfurniture.com | 877-COASTER (262-7837)
PAGE 7OF 7COASTERFURNITURE.COM

ITEM: 460234N (B1-B3)
Note: Dimension tolerance ± 5%
INNER SIZE: 76.5" X 39.25"
COASTERFURNITURE.COM
8.25"
60.75"
79.5" 12"
13.5"
13.5"
0.75"
15"
3.25"
9.25"
22.92"
16.14"
44.25"
9.25"
76.57"
76.57"
36.22"
16.33"