Coaster Benbrook 105513 User manual

105513
DINING ARM CHAIR WITH PU CUSHION SEAT
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
AG 1 O 3
REVISION 0 : 01 / 16 / 2015
PAGE 1 OF 3

ITEM : 105513 ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION
A
B
1 PC
1PC
CUSHION SEAT WITH FRAME
PARTS
IDENTIFICATION
CHAIR BACK
D
RIGHT ARM
1PC
2 PCS
B
C
1
PC
CUSHION
SEAT
WITH
FRAME
FRONT LEG
D
RIGHT
ARM
1
PC
E LEFT ARM 1 PC
HARDWARE IDENTIFICATION
4 PCS
3 PCS3
2 MEDIUM BOLT
SHORT BOLT
1 LONG BOLT 4 PCS
6 ALLEN WRENCH 1 PC
5
LOCK WASHER
FLAT WASHER
11 PCS
11 PCS
4
NOTE :PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS.
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
2 PCS7 SCREW
PAGE2OF3
www.coastercompany.com
NOTE: QUANTITIES SHOWN ARE FOR ONE CHAIR
PAGE
2
OF
3

ITEM : 105513
STEP 1 STEP 2
1.1 ) Align and fasten cushion seat with frame ( B ) to chair back ( A ) leg Align and fasten front leg ( C ) to cushion seat with frame ( B )
ASSEMBLY INSTRUCTIONS
using long bolt ( 1 ), lock washer ( 4 ) and flat washer ( 5 ). using medium bolt ( 2 ) lock washer ( 4 ) and flat washer ( 5 )
1.2 ) Align and fasten cushion seat with frame ( B ) to chair back ( A )
bottom rail using short bolt ( 3 ), lock washer ( 4 ) and flat washer ( 5 ).
11
1.1
1.2
STEP 3 STEP 4
3.1 ) Align and fasten right arm ( D ) and left arm ( E ) to COMPLETED
cushion seat with frame ( B ) using short bolt (3 ), lock washer ( 4 )
dfl h (5) df ll i h ihAll h (6)
and flat washer ( 5 ) and fully tighten with Allen wrench ( 6 ).
www.coastercompany.com
PAGE3OF3
PAGE
3
OF
3
DO NOT FULLY TIGHTEN AT THIS STEP.
THEN FULLY TIGHTEN ALL THE BOLTS
AT STEP 1.1 & 1.2 WITH ALLEN WRENCH ( 6 ).
and fully tighten with Allen wrench ( 6 ).
D
E
3.2 ) Align and fasten right arm ( D ) and left arm ( E ) to
chair back ( A ) leg using screw ( 7 ) and fully
tighten with Phillips head screw driver (NOT INCLUDED).