Coaster 106599 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
Counter Height Stool
REVISION 0: 06/03/2020
106599
COASTERFURNITURE.COM
PAGE 1 OF 7

COASTERFURNITURE.COM
PAGE 2 OF 7
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
ASSEMBLY TIPS :
WARNING !
ASSEMBLY INSTRUCTIONS
106599
ITEM :
ASSEMBLY TIME 15 MINUTES
PARTS IDENTIFICATION
A
B
C
D
1PC
1PC
1PC
1PC
2PCS
E
SEAT AND BACK
UPPER LEG FRAME
LOWER LEG FRAME
WOOD CLEAT
FRONT STRETCHER

HARDWARE IDENTIFICATION
COASTERFURNITURE.COM
ITEM :
PAGE 3 OF 7
ALLEN WRENCH
(M4 x 110MM - BLK) 1PC
2PCS
4PCS
4PCS
4PCS
1PC
PAN HEAD SCREW
(#8 x 1 1/2" - BLK)
LONG BOLT
(M6 x 70mm - RBW)
LOCK WASHER
(1/4" - BLK)
FLAT WASHER
(M6 x 13MM - RBW)
MEDIUM BOLT
(M7 x 50MM - ZB)
ASSEMBLY INSTRUCTIONS
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
ASSEMBLY TIPS :
WARNING !
SHORT BOLT
(M7 x 20MM -RB)
1PC
1
2
3
4
5
6
7
8PCS
FLAT HEAD SCREW
(M4 x 30mm - BLK)
8
106599
NOTE :
Phillips head screw driver is required in the assembly process ; However, manufacturer not provide this item.
Quantities shown are for one chair.

COASTERFURNITURE.COM
ITEM :
STEP 2
PAGE 4 OF 7
106599
ASSEMBLY INSTRUCTIONS
STEP 1
B
C
1
5
1
Remove the cross bar from upper leg frame (C) by unscrewing the hardwares.
(Please keep the hardwares to be used in STEP 3)
ATTENTION !
C
CROSS BAR

COASTERFURNITURE.COM
ITEM :
STEP 4
PAGE 5 OF 7
106599
ASSEMBLY INSTRUCTIONS
STEP 3
1
CROSS BAR

COASTERFURNITURE.COM
ITEM :
PAGE 6 OF 7
106599
ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
E
E
D
7
8
8

ITEM :
COASTERFURNITURE.COM
PAGE 7 OF 7
106599
ASSEMBLY INSTRUCTIONS
STEP 7
STEP 8
COMPLETE
A
4
1

ITEM :106599
COASTERFURNITURE.COM
39.17"
14.37"
18.42"
16.92"
15.15"
17.71"
24.60"
16.92"
19.49"
22.44"
7.08"
3.58"