Coaster 203501KW User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
203501KW (B1&B2)
California King Bed
REVISION 0 : 05/30/2014
REVISOIN 1 : 07/25/2019
PAGE 1 OF 5 COASTERFURNITURE.COM

ITEM:203501KW
(B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
B1 ( BOX 1)
A HEADBOARD PANEL 1PC C LEFT HEADBOARD
LEG 1PC
BRIGHT HEADBOARD
LEG 1PC
B2 ( BOX 2)
D BED SLAT 4PCS H FOOTBOARD PANEL 1PC
EBED SLAT SUPPORT
WITH LEVELER 8PCS 203501KW (B1)*FROM
BOX 1 HEADBOARD
COMPLETE
F BED RAIL 2PCS
G FOOTBOARD LEG 2PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
PAGE 2 OF 5
203501KW (B1)
FROM BOX 1
HEADBOARD
COMPLETE
ASSEMBLY TIME 30 MINUTES
HB 1PC

ITEM:203501KW
(B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 203501KW (B1)
1BOLT
(M6 x 30mm - BLK) 6PCS 3 FLAT WASHER
(1/4" X 13mm - BLK) 6PCS
2SMALL ALLEN
WRENCH
(M4 x 60MM - BLK) 1PC 4 LOCK WASHER
(1/4" - BLK) 6PCS
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 203501KW (B2)
5SHORT FLAT HEAD
SCREW
(M4 x 32mm - RBW) 8PCS 8 SMALL ALLEN
WRENCH
(M4 x 60MM - BLK) 1PC
6LONG FLAT HEAD
SCREW
(M4 x 50mm - RBW) 6PCS 9 BIG ALLEN WRENCH
(M5 x 65MM - BLK) 1PC
7BOLT
(M4 x 40mm - BLK) 8PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 5
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.

ITEM:203501KW (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
STEP 3
COASTERFURNITURE.COM
PAGE 4 OF 5
A
C
B
A
C
B
4
3
2
1
STICKER LEFT
STICKER RIGHT
IF PURCHASE HEADBOARD ONLY,SKIP BELOW STEPS
H
6
G
PLEASE REMOVE THE
PROCTECTIVE FILM
BEFORE ASSEMBLY

ITEM:203501KW
(B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 4 STEP 5
STEP 6 STEP 7
COMPLETE
COASTERFURNITURE.COM
PAGE 5 OF 5
HB
F H
8
7
D
E
9
D 5
6.1
6.2
E

ITEM:203501KW
COASTERFURNITURE.COM
Note : Dimension tolerence ± 5%
74.61"
75.39"
2.95"
85.24"
11.02"
69.49"
13.78"
27.68"
50.98"
INNER SIZE : 72.68" x 85.25"
57.48"
93.32"
9.25"
23.43"