Coaster 223371Q User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
223371Q (B1-B3)
Queen Bed
COASTERFURNITURE.COM
REVISION 0 : 04/30/2020 PAGE 1 OF 2
PAGE 1 OF 6

ITEM:223371Q (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
PARTS IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PAGE 2 OF 6 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
HEADBOARD PANEL
A 1PC
B1 (BOX 1)
B
C
LEFT WING
(WITH “ H” LABEL)
H 1PC RIGHT WING
(WITH “I” LABEL)
I 1PC
E 4PCS
D
F 1PC
B2 (BOX 2)
B3 (BOX 3)
FOOTBOARD PANEL
FOOTBOARD LEG
1PC
2PCS G
BED SLAT SUPPORT
WITH LEVELER
1PC
RIGHT BED RAIL
(WITH “G” LABEL)
LEFT BED RAIL
(WITH “F” LABEL)
4PCS
BED SLAT

ASSEMBLY INSTRUCTIONS
ITEM:223371Q (B1-B3)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
HARDWARE IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 6 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
1
2
3
4
4PCS
4PCS
6PCS
10PCS
BOLT 1
(M8 x 20MM - RBW)
BOLT 2
(M8 x 60MM - RBW)
BOLT 3
(M6 x 16MM - RBW)
7
8
9
6PCS
4PCS
4PCS
BIG LOCK WASHER
BIG FLAT WASHER
(5/16” x 14 Ø - RBW)
(5/16” x 22 Ø - RBW)
BOLT 4
(M6 x 35MM - RBW)
10 8PCS
FLAT HEAD SCREW
(M4 x 32MM - RBW)
5 4PCS
WOOD DOWEL
(M10Ø x 30MM)
11 1PC
SMALL ALLEN WRENCH
(M4 x 100MM - BLK)
6 6PCS
SMALL LOCK WASHER
(1/4” x 12 Ø - RBW)
12 1PC
BIG ALLEN WRENCH
(M5 x 65MM - BLK)
SMALL FLAT WASHER
(1/4” x 19 Ø - RBW)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 223371Q (B2)

ITEM:223371Q (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 1
PAGE 4 OF 6 COASTERFURNITURE.COM
STEP 2
311
C
C
D
L
R
76411
I
A
H
A
I

ITEM:223371Q (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 3
PAGE 5 OF 6 COASTERFURNITURE.COM
STEP 4
Do not fully tighten screws
until assembly is complete
and the bed is level.
FC
G
H
A
12 289
G
5
12 1
C
G
3.1
B
E
11
4
10
B
I
3.2
4.1
4.2

ITEM:223371Q (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 5
PAGE 6 OF 6 COASTERFURNITURE.COM
COMPLETE

81.10"
66.34"
58.86"
2.76 "
70.87 "
73.23 "
63.19"
6.89 "
17.91"
60.63"
5.51"
23.62" 59.25"
60.83"
63.19"
COASTERFURNITURE.COM
ITEM:223371Q (B1-B3)
Note : Dimension tolerance ±5%
INNER SIZE : 60.83" X 80.71"