Coaster 222873 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
222873
Dresser
REVISION 0 : 06/17/2019 PAGE 1 OF 4 COASTERFURNITURE.COM

ITEM:222873
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
PARTS IDENTIFICATION
10 MINUTES
1PC
ASSEMBLY INSTRUCTIONS
STEP 1
PAGE 2 OF 4
DRESSERA

ITEM:222873
ASSEMBLY INSTRUCTIONS
STEP 2
COMPLETE
COASTERFURNITURE.COM
PAGE 3 OF 4

ITEM:222873
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
This tip restraint must be attached to a wall STEP 2
stud using long screw enclosed.
STEP 1
STEP 3
Failure to detach this restraint before moving the furniture may result in injury and damage.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
PAGE 4 OF 4 COASTERFURNITURE.COM
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.

ITEM:222873
COASTERFURNITURE.COM
Note : Dimension tolerance ± 5%
INNER SIZE OF DRAWER A: 3.54" X 14.41" X 13.26"
INNER SIZE OF DRAWER B: 5.9" X 14.41" X 21.73"
57.08"
19.68"
37.4"
3.93"
16"
5.1"
24.57"
7.28"
24.1"
24.1"
14.17"
18"
INNER SIZE OF DRAWER A: 3.54" X 14.41" X 13.26"
INNER SIZE OF DRAWER B: 5.9" X 14.41" X 21.73"