Coaster 900604 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 12
900604
SHOE CABINET
REVISION 0 : 12/08/2015
REVISION 0 : 09/26/2019

900604
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 12
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
80 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
NO DESCRIPTION FIGURE Q’TY
1GLUE 15g 1 PC
2WOODEN DOWEL
Ø 8x30mm 10 PCS
3CAM BOLT
Ø 7x35.5mm 10 PCS
NO DESCRIPTION FIGURE Q’TY
4CAM LOCK
Ø 15x12mm 10 PCS
5PLASTIC FEET
Ø 15mm 4 PCS
6HANDLE
L = 120mm 3 PCS
ALEFT SIDE
PANEL 1 PC
BRIGHT SIDE
PANEL 1 PC
CBOTTOM PANEL 1 PC
DTOP PANEL 1 PC
ECROSS PANEL 1 PC
FDOOR 3 PCS
GSHELF 3 PCS
HPARTITION
PANEL 6 PCS
IBACK PANEL 3 PCS

900604
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 12
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
NO DESCRIPTION FIGURE Q’TY
7HANDLE BOLT
Ø 4x28mm 6 PCS
8PLASTIC SIDE 3 PCS
9LATCH- MALE 6 PCS
10 LATCH-FEMALE 6 PCS
11
PLASTIC SIDE
SCREW
Ø 8x17mm
6 PCS
12 BOLT
Ø 5x15mm 6 PCS
NO DESCRIPTION FIGURE Q’TY
13 SCREW
Ø 4x15mm 18 PCS
14 FIXER 6 PCS
15 FIXER SCREW
Ø 3x19mm 24 PCS
16 RUBBER
Ø 58mm 3 PCS
17 STICKER
Ø 20mm 2 PCS
18 I BAR
L = 533mm 1 PC
Z6,Z7,Z8,Z16 not included in blister packaging.

900604
ITEM:
PAGE 4 OF 12 COASTERFURNITURE.COM
E
D
3
3
x 4
2
x 6
C
2
Apply glue on all wooden dowels to
ensure integrity of the structure.
Apply glue on all wooden dowels to
ensure integrity of the structure.
INCORRECT
CORRECT
STEP 1
STEP 2 5
x 4
3
x 6
x 6
10
2
x 4
A
B
0.8" 0.8" 0.8" 0.8"
3
10
2
5

900604
ITEM:
PAGE 5 OF 12 COASTERFURNITURE.COM
STEP 3
8 x3
13
x 18
F x3 8
8
13
STEP 4
x 6
15
F x3
G x3
15

900604
ITEM:
PAGE 6 OF 12 COASTERFURNITURE.COM
STEP 5
Apply glue on all wooden dowels to
ensure integrity of the structure.
x 6
15
F x3
H x3
G
15
STEP 6
A
C
E
4
1
17
4
x 3
4
17

900604
ITEM:
PAGE 7 OF 12 COASTERFURNITURE.COM
STEP 7
Apply glue on all wooden dowels to
ensure integrity of the structure.
STEP 8
x 3
16
I x3
16
4
x 3
17
B
I
I
C
EA
18
4
1
4
17

900604
ITEM:
PAGE 8 OF 12 COASTERFURNITURE.COM
STEP 9
Apply glue on all wooden dowels to
ensure integrity of the structure.
STEP 10
4
x 4
17
D
A
I
B
E
4
1
x 6
12
9
x 6
F
F
F
12
9

900604
ITEM:
PAGE 9 OF 12 COASTERFURNITURE.COM
STEP 11
STEP 12
6
x 3
7
x 6
x 6
11
11
6
7
H
H
H

900604
ITEM:
PAGE 10 OF 12 COASTERFURNITURE.COM
STEP 13
STEP 14
x 6
15
x 6
14
14
15
14
15
I
I
x 6
15
15

900604
ITEM:
PAGE 11 OF 12 COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
290mm(11.25")
600mm(23.5")
1200mm(47")
534mm(21")
532mm(20.75")
363mm(14.25")
526mm(20.5")
66mm(2.5")
56mm(2")

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with
the 5/8” screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall.
4. Drill a 1-1/4” hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti-tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 12 OF 12 COASTERFURNITURE.COM