Coaster 4241 User manual

Dining Table

HARDWARE IDENTIFICATION
PAGE 3 OF 5
ALLEN WRENCH
(M4 x 63mm - BLK)
1
2
3
4
5
6
7
8
9
BOLT
(M6 x 40mm- RBW)
1PC
4PCS
4PCS
4PCS
8PCS
8PCS
8PCS
SMALL LOCK WASHER
(1/4" - BLK)
SMALL FLAT WASHER
(M6 x 13mm - RBW)
WRENCH
(12.8mm - RBW)
HEX NUT
(5/16" - RBW)
LEVELER
(M6 x 24mm - BLK) 4PCS
BIG LOCK WASHER
(5/16" - RBW)
BIG FLAT WASHER
(5/16" - RBW)
NOTE :
Phillips head screw driver is required in the assembly process ; However, manufacturer does not provide this item.
10 PAN HEAD SCREW
(M4 x 32mm - BLK) 8PCS
1PC
ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
Z-B2 (BOX2) - HARDWARE PACK IS LOCATED IN 4241 (B2)
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
ASSEMBLY TIPS :
WARNING !