Coaster 200970Q B1 User manual

Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
200970Q (B1-B3)
Queen Storage Bed
PAGE 1 OF 10 COASTERFURNITURE.COM
REVISION 0 : 11/18/2019

ITEM:200970Q (B1-B3)
PARTS IDENTIFICATION
AHEADBOARD PANEL 1PC
B1PC
C
COASTERFURNITURE.COM
B1 ( BOX 1 )
1PC
ESTORAGE FOOTBOARD 1PC
F
ROLL SLAT
(10PCS)
B3 ( BOX 3 )
HLEFT BED RAIL
J
PAGE 2 OF 10
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
B2 ( BOX 2 )
LEFT HEADBOARD LEG
RIGHT HEADBOARD LEG
30 MINUTES
ASSEMBLY TIME
1PC
2PCS
1PC
D 1PC
HEADBOARD BOTTOM RAIL
IRIGHT BED RAIL 1PC
CENTER RAIL
CENTER RAIL SUPPORT
WITH LEVELER
K2PCS
G
DRAWER SUPPORT
LEG WITH LEVELER
1SET

HB
200970Q (B1)
FROM BOX 1
HEADBOARD COMPLETE
1PC
FB
200970Q (B2)
FROM BOX 2
STORAGE FOOTBOARD
1PC
ITEM:200970Q (B1-B3)
LCONCEAL PANEL 4PCS
COASTERFURNITURE.COM
PAGE 3 OF 10
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.

Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 200970Q (B3)
11PC
ALLEN WRENCH
(M4 x 110mm - BLK)
216PCS
SHORT BOLT
(M6 x 50mm - BLK)
5
8PCS
SHORT FLAT HEAD SCREW
(M4 x 20mm - BLK)
HARDWARE IDENTIFICATION
COASTERFURNITURE.COM
PAGE 4 OF 10
ITEM:200970Q (B1-B3)
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY INSTRUCTIONS
3
4LOCK WASHER
(5/16" - BLK)
FLAT WASHER
(5/16" x 18 x 1.2 - BLK)
18PCS
18PCS
4PCS
LONG BOLT
(M6 x 70mm - BLK)
6WOOD DOWEL
(M8 x 30mm) 4PCS
7SHORT PAN HEAD SCREW
(M4 x 12mm - BLK) 24PCS
8
20PCS
LONG FLAT HEAD SCREW
(#8 x 1 1/8" - BLK)
9
LONG PAN HEAD SCREW
(M4 x 16mm - RBW) 6PCS
10
2PCS
L BRACKET
(BKT-4HC-01(2.0mm) - BLK)
11
2PCS
HEX NUT
(M6 - RBW)
12
2PCS
U BRACKET
(26 x 63 x 70mm - RBW)
13
1PC
WRENCH
(2 x 24.5 x 85 - RBW)
14

ASSEMBLY INSTRUCTIONS
STEP 2
COASTERFURNITURE.COM
PAGE 5 OF 10
STEP 1
ITEM:200970Q (B1-B3)
A
B
C
1
245
A
B
C
D
D
1
2
4
5

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 6 OF 10
STEP 3
ITEM:200970Q (B1-B3)
STEP 4
HB
HB
H
6
1345
H
I
E
F
F
/I

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 7 OF 10
STEP 5
ITEM:200970Q (B1-B3)
STEP 6
HB
H
I
H
HB
I
H
H
11
8
FB
FB
FB
FB
/I
/I

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 8 OF 10
STEP 7
ITEM:200970Q (B1-B3)
STEP 8
HB
H
I
9
13
9
13
D
HB
I
H
J
K
1
2
4
5
FB
FB
FB

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 9 OF 10
STEP 9
ITEM:200970Q (B1-B3)
STEP 10
HB
I
H
J1
2
12
14 D
HB
I
H
10
G
FB
FB
/FB

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 10 OF 10
STEP 11
ITEM:200970Q (B1-B3)
STEP 12
COMPLETE
L
7