Coaster 460263 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
460263 (B1
-
B4)
Twin/Twin Convertible
Loft Bed
REVISION 0 : 07/15/2010
REVISION 1 : 01/03/2012
REVISION 2 : 06/20/2013
REVISION 3 : 10/29/2013
REVISION 4 : 01/20/2016
REVISION 5 : 08/13/2019 PAGE 1 OF 10 COASTERFURNITURE.COM

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 2 OF 10
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
AF
BF
DF
1PC
LOWER RIGHT
BED END
LOWER
BOTTOM RAIL
2 HOLES
TRESTLE BAR
UPPER FRONT
BED RAIL
BACK GUARDRAIL
FRONT GUARDRAIL 4PCS
ROLL SLAT 1SET
LOWER LEFT
BED END
UPPER BACK
BED RAIL
1PC
B2 (BOX 2)
B3 (BOX 3)
EF
FF
GF
HF
IF
JF
1PC
2PCS
2PCS
2PCS
1PC
1PC
3PCS
KF
MF
B1 (BOX 1)
CF UPPER BED
END
3 HOLES
TRESTLE BAR
SHORT SLAT 6PCS
LEFT LEG
TABLE TOP
LADDER STEP 5PCS
RIGHT LADDER
STILE
RIGHT LEG
LEFT LADDER
STILE
1PC
1PC
1PC
1PC
1PC
2PCS
2PCS
QF
LF
NF
OF
PF
RF
SF
TF
(14PCS)

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 460263 (B2)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
PAGE 3 OF 10
LEVELER
(6 x 30mm - BLK)
24PCS
LONG BOLT &
BARREL NUT
(M6 x 110 x 15mm - BLK)
CYCLINDER NUT
(M6 x 15mm - BLK)
METAL DOWEL
(10 x 125mm - BLK)
ALLEN WRENCH
(4 x 80MM - BLK)
U-BRACKET
(95 x 54 x 17 x 2mm - BLK)
SHORT BOLT
(M6 x 30 x 13mm - BLK)
LONG FLAT HEAD
SCREW
(4 x 30mm - BLK)
WOOD DOWEL
(10 x 40mm )
SHORT FLAT HEAD
SCREW
(3.5 x 15mm - BLK)
MEDIUM BOLT &
BARREL NUT
(M6 x 85 x 15mm - BLK)
LONG BOLT
(M6 x 40 x 13mm - BLK)
1
18PCS
SHORT BOLT &
BARREL NUT
(M6 x 60 x 15mm - BLK)
4PCS
10PCS
10PCS
6PCS
20PCS
2
3
4
5
6
7
8
9
10
11
12
13
4PCS
32PCS
2PCS
15PCS
5PCS
2PCS

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 10

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COASTERFURNITURE.COM
PAGE 5 OF 10

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
STEP 5 STEP 6
STEP 7 STEP 8
COASTERFURNITURE.COM
PAGE 6 OF 10
HF
IF 7
MF
MF
CF
CF
8
8
8
22
2
2
2
13
13

ITEM:
460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
STEP 9 STEP 10
STEP 11 STEP 12
COMPLETE
COASTERFURNITURE.COM
PAGE 7 OF 10

ITEM:
460263 (B1-B4) CUSHION
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 8 OF 10
SMALL
BIG
SMALL BIG
SMALL
SMALL
BIG BIG SMALL
BIG
BIG
BIG
SMALL
SMALL
BIG BIG
BIG SMALL

ITEM: 460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
The length and width of the bunk mattress are as follow:
Upper bunk 37 1/2" - 38 1/2" 6" Maximum
Lower bunk 37 1/2" - 38 1/2" 6" Maximum
1.
2.
3. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using upper bunk.
11.
12. The use of water or sleep flotation mattress is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD:
14.
REPLACEMENT PARTS:
Never attach or hang items to any part of the bunk bed that are not designed for use with the bed
for example, but not limited to hooks, belts, and jump ropes.
Replacement parts, including additional guardrails may be obtained from any COASTER
Furniture Dealer.
PAGE 9 OF 10 COASTERFURNITURE.COM
Ensure thickness of mattress does not exceed 6” and there must be at least 5” from mattress
sleeping surface to top edge of guardrail.
SAFETY WARNING
Follow the information on the warnings appearing on the upper bunk end structure and on the
carton. Do not remove the warning label from bed.
Always use the recommended size mattress or mattress support or both to help prevent the
likelihood of entrapment or falls.
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
SIZE OF MATTRESS
Length Width Thickness
74" - 75"
74" - 75"

ITEM: 460263 (B1-B4)
ASSEMBLY INSTRUCTIONS
1.
2.
3.
4.
5. Failure to follow the above WARNING, and/or failure to follow assebmly
instructions completely, will void any and all liability of COASTER COMPANY OF
AMERICA for damages and injury to persons and preperty.
Coasterfurniture.com
877-COASTER (262-7837)
PAGE 10 OF 10 COASTERFURNITURE.COM
WARNING
TO PREVENT SERIOUS OR FATAL INJURY
When using beds as bunk beds, the ladder MUST be securely attached to the
upper bunk rail at all times.
When using the beds as two (2) separate floor-standing beds the ladder MUST
be stored in the separate location where children cannot use the ladder in any
manner.
DO NOT use, nor permit children to use, the ladder in any manner whatsover,
other than to access the top unit when used as bunk beds, and only if the ladder
is securely attached to the top bunk rail, as set forth in the instructions.
Any misuse or unauthorized use of the ladder could recult in serious or fatal
injury.

ITEM:
NOTE : Dimension tolerance ±5%
COASTERFURNITURE.COM
460263 (B1-B4)
INNER SIZE FOR LOFT BED: 39.17'' X 77.95''
81.5''
71.65''
26.06''
37.01''
30.12''
75.98''
5.75''
21.26''
42.72''
9.06''
9.06''
9.06''