Coaster 461252 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
461252
(B1
-B3)
Twin/Full Bunk Bed
REVISION 0 : 12/25/2019
PAGE 1 OF 10
COASTERFURNITURE.COM

ITEM:461252 (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
LEFT UPPER
BED END
RIGHT UPPER 1PC
EUPPER FRONT
SIDE RAIL 1PC
N4PCS
FUPPER BACK
SIDE RAIL 1PC
O
WITH CUT OUT
1PC
H1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
30 MINUTES
PAGE 2 OF 10
LEFT LOWER
BOX 1
BOX 2
RIGHT LOWER
1PC
LOWER BACK
SIDE RAIL
M
L2PCS
G1PC
PRIGHT LADDER
STILE 1PC
I2PCS
LADDER STEP
J2PCS
KLOWER ROLL
SLAT (14PCS) 1SET UPPER ROLL
SLAT (14PCS)
R1SET
LOWER FRONT
SIDE RAIL
BACK GUARDRAIL
FRONT GUARDRAIL
GUARDRAIL SUPPORT
LEFT LADDER
STILE
GUARDRAIL SUPPORT
QBED SLAT
SUPPORT
WITH LEVELER
4PCS
BOX 3
CBED END
1PC
1PC
1PC
A
BBED END
BED END D

ITEM: 461252(B1-B3)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 461252 (B2)
1LONG BOLT
(1/4 x 90mm - RBW)
24PCS
6MEDIUM BOLT
(1/4 x 38mm - RBW)
4PCS
2BARREL NUT
(1/4 x13mm - RBW)
24PCS
7SHORT BOLT 10PCS
3WOOD DOWEL 16PCS
8ALLEN WRENCH
(65 x 64MM - RBW)
1PC
4LONG FLAT HEAD SCREW
(1/4 x 50mm - RBW)
8PCS
9SHORT FLAT HEAD SCREW
(M4 x 30mm - RBW) 16PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 10
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
ASSEMBLY INSTRUCTIONS
(10 x40mm)
4PCS
METAL DOWEL
(9.5 x 125mm - RBW)
5
(1/4 x 30mm - RBW)

461252(B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 10
C
D
G
H
G
3
1
2
C
CG
A
B
D
5
5
5
5
ITEM:
D&&H
8
LOWER BED END

ITEM:461252(B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COASTERFURNITURE.COM
PAGE 5OF 10
CG
D
B
A
F
E
E
3
1
2
B
13
J
M
IL
J
M
L
I
7
22
&F
A&
&J
8
8
4.1
4.2
8

ITEM:461252 (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
COASTERFURNITURE.COM
PAGE 6OF 10
3
1I
2
AF
L
7
7
ME
A
B
D
C
L
E
G
F
I
4
8P
N
N
N
&J
O
&
8
5.1
5.3
5.2 8
8
P
O

ITEM:461252 (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 7
STEP 8
COASTERFURNITURE.COM
PAGE 7OF 10
G
D
B
C
A
E
R
K
6
6
E
8
7.1
G
NP
8
6
6
7.2
R
F
9
P
E
9
K
Q
8.1
8.2
8.3
P
O
P
N
O

ITEM:461252 (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 9
COASTERFURNITURE.COM
PAGE 8OF 10
COMPLETE

ITEM:461252 (B1-B3)
ASSEMBLY INSTRUCTIONS
The length and width of the bunk mattress are as follow:
Upper bunk 37 1/2"- 38 1/2" 6" Maximum
Lower bunk 54" 6" Maximum
1.
2.
3. Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8.
Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using upper bunk.
11.
12. The use of water or sleep flotation mattress is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD:
14.
REPLACEMENT PARTS:
Always use the recommended size mattress or mattress support or both to help prevent
the likelihood of entrapment or falls.
Periodically check and ensure that the guardrail, ladder, and other components are in
their proper position, free from damage, and that all connectors are tight.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
Never attach or hang items to any part of the bunk bed that are not designed for use with
the bed for example, but not limited to hooks, belts, and jump ropes.
Replacement parts, including additional guardrails may be obtained from any COASTER
Furniture Dealer.
PAGE 9OF 10 COASTERFURNITURE.COM
Ensure thickness of mattress does not exceed 6” and there must be at least 5” from mattress
sleeping surface to top edge of guardrail.
SAFETY WARNING
Follow the information on the warnings appearing on the upper bunk end structure and on
the carton. Do not remove the warning label from bed.
Width
SIZE OF MATTRESS
Length Thickness
74" -75"
74" -75"

ITEM:461252(B1-B3)
ASSEMBLY INSTRUCTIONS
1.
2.
3.
4.
5.
Any misuse or unauthorized use of the ladder could result in serious or fatal injury.
Failure to follow the above WARNING, and/or failure to follow assembly instructions
completely, will void any and all liability of COASTER COMPANY OF AMERICA for
damages and injury to persons and property.
PAGE 10 OF 10 COASTERFURNITURE.COM
When using beds as bunk beds, the ladder MUST be securely attached to the upper bunk
rail at all times.
When using the beds as two (2) separate floor-standing beds, the ladder MUST be stored
in a separate location where children cannot use the ladder in any manner.
DO NOT use, nor permit children to use, the ladder in any manner whatsoever, other than
to access the top unit when used as bunk beds, and only if the ladder is securely attached
to the top bunk rail, as set forth in the instructions.
WARNING
TO PREVENT SERIOUS OR FATAL INJURY
Coasterfurniture.com | 877-COASTER (262-7837)

ITEM:461252(B1-B3)
COASTERFURNITURE.COM
UPPER INNER SIZE
: 39.76" X 76.06"
68.89"
81.89"
7.48"
12" 14.96"
11.41"
1"
13.78"
11.02"
58.66"
58.66"
11.02"
LOWER INNER SIZE: 54.13" X 76.06"
50.78"
44.1"
16.22"
44.84" 76.5"