Coaster 803374 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 13
REVISION 0 : 06/03/2019
REVISION 1 : 01/02/2020
803374
BOOKCASE

803374
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 13
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
40 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ALEFT SIDE
PANEL 1 PC
BRIGHT SIDE
PANEL 1 PC
CBOTTOM PANEL 1 PC
DMIDDLE CROSS
PANEL 1 PC
EUPPER CROSS
PANEL 1 PC
FTOP 1 PC
GUPPER DIVIDER
PANEL 2 PCS
HLOWER DIVIDER
PANEL 1 PC
IADJUSTABLE
SHELF 2 PCS
JMIDDLE BACK
PANEL 1 PC
KLOWER BACK
PANEL 2 PCS
LLEFT DOOR 1 PC
MRIGHT DOOR 1 PC
NUPPER BACK
PANEL 1 PC

803374
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 13
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
NO DESCRIPTION FIGURE Q’TY
1GLUE 40g 1 PC
2WOODEN DOWEL
Ø 8x30mm 20 PCS
3CAM BOLT
Ø 7x35.5mm SR 18 PCS
4CAM LOCK
Ø15x12mm SR 18 PCS
5SCREW
Ø4.5x42mm SR 6 PCS
6PIN
Ø 4.9x8mm SR 8 PCS
7HANDLE
L=120mm BLK 2 PCS
8HANDLE SCREW
Ø 4x15mm BLK 16 PCS
9HINGE
Ø 35mm SR 4 PCS
NO DESCRIPTION FIGURE Q’TY
10 HINGE SCREW
Ø 4x15mm SR 16 PCS
11 WOODEN DOWEL
Ø 8x50mm 2 PCS
12 BOLT
M6x28mm BLK 4 PCS
13 ALLEN WRENCH
4mm SR 1 PC
14 FLOOR PROTECTOR
50x10mm 4 PCS
15 STICKER
Ø 20mm 3 PCS
16 FIXER 6 PCS
17 FIXER SCREW
Ø 3x19mm SR 6 PCS
18 I BAR
L=793mm 1 PC
Z7,Z9,Z18 not included in blister packaging.
OLEG FRAME 2 PCS

803374
ITEM:
PAGE 4 OF 13 COASTERFURNITURE.COM
x 2
x 12
3
2
H
D
C
3
2
50mm
G -1
G -2
E
3
2
11
x 2
3
2
x 2
x 8
11
INCORRECT
CORRECT
STEP 1
STEP 2
Apply glue on all wooden dowels to
ensure integrity of the structure.

803374
ITEM:
PAGE 5 OF 13 COASTERFURNITURE.COM
STEP 3
STEP 4
Apply glue on all wooden dowels to
ensure integrity of the structure.
x 2
5
E
G -1
1
5
4
15
x 2
x 2
x 2
15
5
4
E
G -2
D4
5

803374
ITEM:
PAGE 6 OF 13 COASTERFURNITURE.COM
STEP 5
STEP 6
Apply glue on all wooden dowels to
ensure integrity of the structure.
8
14
A
A
3
O
x 6 x 6
8
x 2
3
14
x 2
x 2
x 2
15
5
4
D
H
54
1
C
5

803374
ITEM:
PAGE 7 OF 13 COASTERFURNITURE.COM
STEP 7
STEP 8
J
C
K
K
18
x 6
x 6
4
15
A
C
4

803374
ITEM:
PAGE 8 OF 13 COASTERFURNITURE.COM
STEP 9
STEP 10
x 6 x 6
8
x 2
3
14
O
B
B
8
3
14
x 6
x 6
4
15
N
N
B
C
4

803374
ITEM:
PAGE 9 OF 13 COASTERFURNITURE.COM
STEP 11
STEP 12
x 2
x 2
x 4
4
15
12
13
12
4
F
G
x 8
x 4
x 2
3
10
9
3
F
L
9
10
M

803374
ITEM:
PAGE 10 OF 13 COASTERFURNITURE.COM
STEP 13
STEP 14
x 4
x 2
x 8
(A)
(B)
(C)
(A)
(C)
(B)
10
87
7
8
L
M
10
x 8
I
I
6
6

803374
ITEM:
PAGE 11 OF 13 COASTERFURNITURE.COM
STEP 16
STEP 15
COMPLETE
x 6 x 6
16 17
16
16
17
17

803374
ITEM:
PAGE 12 OF 13 COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
150mm(5.75")
794mm(31.25")
371mm(14.5")
253mm(9.75")
321mm(12.5")
317mm(12.25")
257mm(10")
300mm(11.75")
327mm(12.75")
589mm(23")
395mm(15.5")
900mm(35.5")
1600mm(63")
345mm(13.5")
345mm(13.5")
384mm(15")
384mm(15")
389mm(15.25")
389mm(15.25")

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with
the 5/8” screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall.
4. Drill a 1-1/4” hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti-tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 13 OF 13 COASTERFURNITURE.COM