Coaster 800436 User manual

800436
COMPUTER DESK
ASSEMBLY INSTRUCTION
COASTER FINE FURNITURE
page 1 of 9
www.coastercompany.com
2011/9/20

ITEM: 800436
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attaced instructions in the same sequence as numbered to assure fast & easy assembly.
Warning !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commerecial establishment.
H CABINET SIDE PANEL 1pc
A FRAME 1pc
ICABINET SIDE PANEL 1pc
J CABINET BOTTOM 1pc
B
FRAME
1pc
ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCION
PARTS IDENTIFICATION:
B
FRAME
1pc
KCABINET BACK PANEL 1pc
LKEYBOARD 1pc
C BACK PANEL 1pc
MDRAWER DOOR PANEL 2pcs
DIRON TUBE 2pcs
NDRAWER BACK PANEL 2 pcs
EGLASS TOP 1pc O DRAWER SIDE PANEL 2pcs
PDRAWER SIDE PANEL 2pcs
FBRACE 1pc
QDRAWER BOTTOM 2pcs
GCABINET TOP 1pc
page 2 of 9
www.coastercompany.com

ITEM: 800436 ASSEMBLY INSTRUCTION
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commerecial establishment.
z
R
SIDE GLIDE RAILS
2pcs
NO
DESCRIPTION
FIGURE
Q'TY
SSIDE GLIDE RAILS 2pcs
4 pcs
94 pcs
ASSEMBLY INSTRUCTION
PARTS IDENTIFICATION:
CAM LOCK
CAM LOCK
8
HARDWARE PACKAGE
TSIDE GLIDE RAILS 2pcs 10 SUCTION CUP 6pcs
U
SIDE GLIDE RAILS
2pcs 11 SCREW 12pcs
3# X 38mm
12 SCREW 24pcs
VSIDE GLIDE RAILS 2 pcs 3# X 12mm
13 DOWEL 8pcs
Z
NO DESCRIPTION FIGURE Q'TY
14 FOOT PAD 4pcs
2BOLT
3/16"X10mm 15 ALLEN KEY 1pc
BOLT
1/4"X12mm
BOLT
1/4"X28mm
BOLT
1/4"X38mm
BOLT
1
HARDWARE PACKAGE
4pcs3
4pcs
4pcs
WOOD DOWEL 4pcs
4 8pcs
5
BOLT
3*16"X28mm
page 3 of 9 www.coastercompany.com
6 2pcs
7 2pcs
HANDLE
22

ITEM: 800436 ASSEMBLY INSTRUCTION
STEP 1.
STEP 2.
page 4 of 9 www.coastercompany.com

ASSEMBLY INSTRUCTION
STEP 3.
ITEM: 800436
STEP 4.
page 5 of 9 www.coastercompany.com

ASSEMBLY INSTRUCTION
STEP 5.
ITEM: 800436
STEP 6.
page 6 of 9 www.coastercompany.com

ASSEMBLY INSTRUCTION
STEP 7.
ITEM: 800436
STEP 8.
page 7 of 9 www.coastercompany.com

ASSEMBLY INSTRUCTION
STEP 9.
STEP 10.
ITEM: 800436
STEP 11.
page 8 of 9 www.coastercompany.com

ASSEMBLY INSTRUCTION
STEP 1 : Attach FOOT PADS (14) onto FRAME (A) & (B) by screwing into the legs. Assemble IRON TUBES (D)
between FRAMES (A) & (B) using BOLTS ( C ).
STEP 2: Assemble BACK PANEL (C ) between FRAMES (A) &(B) and using BOLTS (3).
STEP 3: Screw SIDE GLIDE RAILS ( T) on CABINET SIDE PANEL (H) using SCREWS (12). Screw SIDE GLIDE RAILS ( U)
on CABINET SIDE PANEL ( I ) using SCREW (12).
STEP 4: Insert DOWELS (13) into ( H) & (I) , then attach CABINET BOTTOM (J) using the CAM LOCKS ( 8).
STEP 5: Slide the CABINET BACK PANEL (K) between (H) & (I ) and place the CABINET TOP ( G) in place and secure
using SCREW (11).
STEP 6: Assemble the DRAWER BACK PANEL (N) with DRAWER SIDE PANELS ( O ) & ( P) using SCREW ( 11).
Slide BOTTOM DRAWER (Q) between ( O ) & ( P) . lnsert DOWELS (13) and WOOD DOWELS (1) into (O) & (P)
and attach the DRAWER DOOR PANEL (M) using the CAM LOCKS (9) . Finish the drawer by fastening the HANDLE (7)
onto the drawer using BOLT (6).
STEP 7 : Assemble SIDE GLIDE RAILS ( R ) & ( S ) on the drawer using SCREWS (12).
STEP 7 : Assemble SIDE GLIDE RAILS ( R ) & ( S ) on the drawer using SCREWS (12).
STEP 8: Attach the BRACE (F) and the drawer frame completed in STEP 5 onto the IRON TUBES ( D)
using BOLTS(4). Fasten the SIDE GILDE RAILS ( V) onto KEYBOARD (L) using SCREWS (12).
STEP 9 : Attach the SIDE GLIDE RAILS (V) from the previous step onto IRON TUBES ( D)
using BOLTS (2). Then , slide in the drawers completed in STEP 7.
STEP 10: Attach the SUCTION CUPS (10) and place the GLASS TOP ( E) on top . Tighten all the hardware.
STEP 11 : Finished.
page 9 of 9