Coaster 300123FULL User manual

300123FULL
FULL SIZE BED
ASSEMBLY INSTEUCTIONS
COASTER FINE FURNITURE
2014-5-8
1 OF 4

ITEM: 300123FB1 ASSEMBLY INSTRUCTION
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of
assembly.
3. Please follow attached instructions in the same sequence as numbered to assure
fast & easy assembly.
warning
1. Don't attempt to repair or modify parts that are broken or defective please contact
the store immediately.
2. This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATION
Headboard 1PC
A
Headboard
1PC
Wood legs 2 PCS
HARDWARE PACKAGE
B
5*23*67mm Allen wrench 1 PC
Ø5/16 * Ø16 * Ø1.5 mm Flat washer 2 PCS
HARDWARE
PACKAGE
1
2
Long bolt 2 PCS
All above hardware pack is located in 300123F B1
3
2 OF 4

ITEM: 300123FB2 ASSEMBLY INSTRUCTION
PARTS IDENTIFICATION
Wood legs 2 PCS
Bed rail 2 PCS
B
C
Footboard 1 PC
Slat 3 PCS
E
D
Support leg 3 PCS
F
HARDWARE PACKAGE
Q'TY
1 1 PC
2 Flat washer Ø5/16 * Ø16 * Ø1.5 mm 2 PCS
3
2 PCS
Allen wrench 5*23*67mm
DESCRIPTION FIGURE
Long bolt
3
2
PCS
41 PC
51 PC
62 PCS
Headboard corner bracket - Left (facing)
Headboard corner bracket - Right (facing)
Footboard corner bracket
Long
bolt
7 18 PCS
8 18 PCS
9 6 PCS
Short bolt
Wood screw
Flat washer Ø6.5 * Ø19 * Ø2 mm
10 1 PC
All above hardware pack is located in 300123F B2
3OF4
A
llen wrench 4*23*60mm
3 OF 4

STEP 1
IT NEEDS TWO PERSONS AND TAKES ABOUT THIRTY MINUTES TO ASSEMBLE
THE ITEM.
STEP 2
Attach the wooden foot(B) to the headboard(A) and footboard(D)
Align and attach the left and right brackets (4 and 5) to the bed rails (C) using flat
washer (7) bolt (8) and tighten with allen wrench (10). Then align and attach the
footboard brackets (6) to the footboard (D) and bed rails (C) using flat washer (7) bolt
STEP 3
(8) and tighten with allen wrench (10). Finally hang the bed rails (C) to the headboard
(A). Now tighten all corner brackets.
Set up support legs on the slats first, then attach slats on the side rails using wood
screw
(
9
)
ti
g
hten with screw driver
(
not included
)
.
4 of 4