Coaster 800778 User manual

800778
DESK /CHAIR
ASSEMBLY INSTRUCTION
COASTER FINE FURNITURE
www.coastercompany.com
1 OF 4 7/26/2014
FINE FURNITURE

ITEM :800778 ASSEMBLY INSTRUCTION
ASSEMBLY INSTRUCTION
ASSEMBLY TIPS:
1 、 Remove hardware from box and sort by size.
2 、 Please check to see that all hardware and parts are present prior to start of asscmbly.
3 、 Please follow attached instructions in the same sequence as numbered to assure fast &easy assembly.
▲ Warning!
1 、 Don`t attempt to repair or modify parts that are broken or defective.Please contact the store immediately.
2 、 This product is for home use only and not intended for commercial establishment.
PARTS IDENTIFICATION
A TOP
1PC
E SEAT
1PC
B DESK LEGS
4PCS
F CHAIR LEGS 2PCS
C DRAWER 2PCS G CUSHION 1PCS
D CHAIR
BACK 1PCS
HARDWARE IDENTIFICATION
NO DESCRIPTION FIGURE Q`TY
1 WRENCH 5MM 1PCS
2 BOLT 5/16″ DAL×2－1/8″ 8PCS
3 BOLT 5/16″ DAL×3″ 4PCS
4 BOLT 5/16″ DAL×2－1/4″ 4PCS
5 BOLT 5/16″ DAL×1－1/2″ 1PCS
6 LOCK 5/16"DAL 17PCS
7 WRSHER 5/16" DAL 17PCS
8 SCREW Φ4mm×5/8" 4PCS
www.coastercompany.com 2 OF 4
FINE FURNITURE

ITEM : 800778 ASSEMBLY INSTRUCTION
1.) Step 1: Put table top upside down on soft nonabrasive surface(using 2 people), bolt legs to table
top by using #2 bolts, #6 lock washer, #7 flat washers and tighten with wrench.
www.coastercompany.com 3 OF 4
FINE FURNITURE

ITEM :800778 ASSEMBLY INSTRUCTION
Step 1: Bolt seat to cushion by using
# 8 screws, and tighten by wrench.
Step 2: Bolt legs to seat box with cushion using
#4 bolts, #6 lock washer, #7 flat washer
and tighten with #1 wrench.
Step 3: Assembly seat to chair back by using #3 bolts, #6 lock washer , #7 flat washer and tighten
with #1 wrench. Insert #5 bolts, #6 lock washer , #7 flat washer into center holes of seat frame
and tighten with #1 wrench.
www.coastercompany.com 4 OF 4
FINE FURNITURE