Coaster 801304 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 08/18/2017
PAGE 1 OF 7 COASTERFURNITURE.COM
BOOKCASE
801304
REVISION 1 : 08/10/2020

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
COASTERFURNITURE.COM
ASSEMBLY TIME 60 MINUTES
PARTS IDENTIFICATION
1PCA TOP GLASS
801304
ITEM:
WARNING!
PAGE 2 OF 7
4PCSB GLASS SHELF
2PCSC TOP CROSSBAR
6PCSD SUPPORT CROSSBAR
2PCS
ECROSSBAR
2PCS
FFRAME
B1: TOP
B2: BASE

ASSEMBLY INSTRUCTIONS
801304
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 7
HARDWARE IDENTIFICATION
1BOLT
(3/16" x 50mm) 8PCS
12PCS
CAP
(10 x 20mm SR)
BOTTOM CAP
(20 x 20mm BLK)
2
34PCS
20PCS
LED BOLT
(3/16" x 21mm)
LED COVER
(∅5 x 10mm)
4
520PCS
1PC
ALLEN WRENCH
(3mm)
6
Hardware pack is located in 801304B2

COASTERFURNITURE.COM
PAGE 4 OF 7
ASSEMBLY INSTRUCTIONS
801304
ITEM:
STEP 1
STEP 2
Do not tighten until each step is completed or instructed.
2
2
2
2
2
2
1
1
1
1
D
C
D
D
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
3
3
F
4
4
E
2
2
2
2
2
2
1
1
1
1
D
C
D
D
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
E

COASTERFURNITURE.COM
PAGE 5 OF 7
ASSEMBLY INSTRUCTIONS
801304
ITEM:
STEP 3
STEP 4
A
B
B
B
B
COMPLETE

COASTERFURNITURE.COM
PAGE 6 OF 7
ASSEMBLY INSTRUCTIONS
801304
ITEM:
Note : Dimension tolerance ±5%
63"
1600 mm
59"
1500 mm
13 3
4"
349 mm
Product Size : 1500 X 349 X 1600 H (MM)
Product Size : 59" X 13 3
4" X 63"
1500
880
349
1600
313
160295295295295
160

This tip restraint must be attached to a wall STEP 2
stud using long screw enclosed.
STEP 1
STEP 3
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
PAGE 4 OF 4 COASTERFURNITURE.COM
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
ITEM: 205443
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
a plastic wall
801304
PAGE 7 OF 7