Coaster 805713 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 07/15/2020
COASTERFURNITURE.COM
Bookcase
805713
PAGE 1 OF 6

1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
WARNING!
ASSEMBLY TIME 20 MINUTES
PARTS IDENTIFICATION
COASTERFURNITURE.COM
PAGE 2 OF 6
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
ITEM : 805713
B LEFT BOTTOM FRAME
C RIGHT TOP FRAME
D RIGHT BOTTOM FRAME
E SHELF (WITH "E" LABEL)
1PC
A LEFT TOP FRAME
1PC
1PC
1PC
1PC
1PC
1PC
1PC
1PC
F SHELF (WITH "F" LABEL)
G SHELF (WITH "G" LABEL)
H SHELF (WITH "H" LABEL)
I SHELF (WITH "I" LABEL)

NOTE:
Phillips head screw driver is required in the assembly process; however, manufactures does not provide this item.
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
WARNING!
HARDWARE IDENTIFICATION
COASTERFURNITURE.COM
PAGE 3 OF 6
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
ITEM : 805713
1 LONG BOLT
( Ø1/4'' x 35 - RBW )
2 WOOD DOWEL
( Ø8 x 30 - NT )
3 ALLEN WRENCH
( 4mm - RBW )
20PCS
4PCS
1PC
4
5
BARREL
( Ø1/4'' - RBW )
PAN HEAD SCREW
( 4 x 30 - RBW )
20PCS
4PCS

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
STEP 1
ITEM :
PAGE 4 OF 6
805713
STEP 2
5
B
2
A
2
5
D
2
C
2

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
STEP 3
PAGE 5 OF 6
STEP 4
3
1
3
1
4
4
COMPLETE
E
F
G
H
I
A
B
C
D
ITEM : 805713

1. To attach the anti-tip strap, securely mount one end to the top of the case piece with the 5/8" screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end on the wall.
4. Drill a 1- 1/4" hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti- tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to detach this restraint before moving the furniture may result in injury and damage.
COASTERFURNITURE.COM
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
PAGE 6 OF 6
ITEM : 805713

NOTE: Dimension tolerance ±5%
COASTERFURNITURE.COM
17''
63.6''
4.15''
8.35''
10.15''
12.25''
12.25''
12.25''
12.25''
11.75''
13.5''
15.25'' 6.8''
24.4''
26.25''
ITEM : 805713