Coaster 753308 User manual

753308
Coffee
PAGE 1 OF 4 COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 05/05/2020
Table

ITEM:753308
COASTERFURNITURE.COM
PAGE 2 OF 4
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
10 MINUTES
ASSEMBLY TIME
PARTS IDENTIFICATION
A
B
TOP 1PC
LEG 4PCS
CSHELF 1PC
HARDWARE IDENTIFICATION
11PC
ALLEN WRENCH
(M4 - BLK)
28PCSBOLT
(M6 x 60mm - RBW)
3
4
LOCK WASHER
(5/16" - RBW)
FLAT WASHER
(5/16" x 18 x 1.2 - RBW)
8PCS
8PCS
54PCS
FLAT HEAD SCREW
(M4 x 38mm - RBW)

STEP 2
COASTERFURNITURE.COM
PAGE 3 OF 4
ITEM:753308
STEP 1
ASSEMBLY INSTRUCTIONS
A
B
C
B
2.2
5C
B
12
34
2.1
BA
A

STEP 4
COMPLETE
COASTERFURNITURE.COM
PAGE 4 OF 4
ITEM:753308
STEP 3
ASSEMBLY INSTRUCTIONS
B
5
B
C
3.2
A
B
C
12
34
3.1
BA

COASTERFURNITURE.COM
NOTE : DIMENSION TOLERANCE ±5%
ITEM:753308
47.2"
23.6"
20"
4.7"
41.5"
17.9"
INNER SIZE OF DRAWER : 4.1" x 14.8" x 15.3"
20.2"
6.5"
6"
40.8"
17.2"