Coaster Barzini 205891Q B1 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
205891Q (B1&B2)
Queen Bed
REVISION 0 : 01/01/2020
PAGE 1 OF 4
COASTERFURNITURE.COM

ITEM:205891Q (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 ( BOX 1)
A
HEADBOARD
PANEL
1PC D
LEFT
HEADBOARD
LEG
1PC
B
FOOTBOARD 1PC E BED SLAT 4PCS
C
RIGHT
HEADBOARD
LEG
1PC F
BED SLAT
SUPPORT WITH
LEVELER
4PCS
B2 ( BOX 2)
G
BED RAIL 2PCS B 1PC
HB 1PC
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
14 MINUTES
PAGE 2 OF 4
205891Q(B1)
FROM BOX 1
HEADBOARD
COMPLETE
COASTERFURNITURE.COM
205891Q(B1)
FROM BOX 1
FOOTBOARD

ITEM:205891Q (B1&B2)
ASSEMBLY INSTRUCTIONS
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 205891Q (B1)
1 6PCS
2 6PCS
3 6PCS
4 1PC
5 8PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 4
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
ASSEMBLY TIPS:
COASTERFURNITURE.COM
BOLT
(M6 x 30mm - BLK)
LOCK WASHER
(1/4" - BLK)
FLAT WASHER
(1/4"ID x 13mm - BLK)
ALLEN WRENCH
(M4 x 60mm - BLK)
FLAT HEAD SCREW
(M4 x 32mm - RBW)

ITEM:205891Q (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
STEP 3 STEP 4
COMPLETE
COASTERFURNITURE.COM
PAGE 4 OF 4
4
2
A
G
C
A
B
3.1
3.2
F
leveler
E
1
3
D
C
G
C
G
Note : Please take note of the marking
sticker (L&R) on the leg.
**BACK VIEW**
Note : Make sure the protective cloth is
sufficient enough to protect bed
rail(G) before hammering.
3.3
5
G
E
F
leveler

ITEM:205891Q (B1&B2)
Note : Dimension tolerence ± 5%
COASTERFURNITURE.COM
PAGE 4 OF 4
INNER SIZE: 60.94 " x 81.10"
63.39"
55.91"
57.48"
14.76"
30.79"
18.50"
59.25"
62.99"
3.94"
8.27"
81.10"
84.65"
25"
9.65"