Coaster 400931FB1 User manual

ASSEMBLY INSTRUCTIONS
Fine Furniture for every stage of life
400931F(B1-B3)
Full Storage Bed
REVISION 0 : 10/20/2016
REVISION 1 : 03/10/2020
PAGE 1 OF 6 COASTERFURNITURE.COM

ITEM:
400931F (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 (BOX 1)
AFOOTBOARD 1PC
B2 (BOX 2)
B ROLL SLAT (13PCS) 1SET
C CENTER RAIL 1PC
DBED SLAT SUPPORT
WITH LEVELER 3PCS
E RIGHT BED RAIL 1PC
F LEFT BED RAIL 1PC
B3 (BOX 3)
G DRAWER 2PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
30 MINUTES
PAGE 2 OF 6

ITEM:
400931F (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX2) HARDWARE PACK IS LOCATED IN 400931F(B2)
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 6
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3
8PCS
LOCK WASHER
(Ø1/4" x 10D x 1.1mm - RBW) 8PCS
6PCs4
18PCS
2FLAT WASHER
(Ø1/4" x 22D x 2mm - RBW)
BOLT
(Ø1/4" x 40mm - RBW)
5
FLAT HEAD SCREW
(Ø8 x 25mm)
1PC
ALLEN WRENCH
(4mm - RBW)

ITEM:
400931F (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 6
E
FA
G

ITEM:
400931F (B1-B3)
STEP 3
STEP 4
COASTERFURNITURE.COM
PAGE 5 OF 6
G
2
G
3
1
5
B
C
D
C
B
D

ITEM:
400931F (B1-B3)
STEP 5
STEP 6
COMPLETE
COASTERFURNITURE.COM
PAGE 6 OF 6
B
C
F
E,F
4
B

ITEM:
400931F (B1-B3)
COASTERFURNITURE.COM
INNER SIZE OF BED : 74" x 53"
Note :Dimension tolerance ±5%
INNER SIZE OF DRAWER : 17" x 23" x 6"
15'