Coaster CURIO 950276 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
REVISION 0 : 03/15/2018
PAGE 1 OF 9 COASTERFURNITURE.COM
CURIO CABINET
950276
REVISION 1 : 08/24/2020
Fine Furniture for every stage of life

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
COASTERFURNITURE.COM
ASSEMBLY TIME 50 MINUTES
PARTS IDENTIFICATION
1PCA GLASS DOOR
(1529 x 292mm)
950276
ITEM:
WARNING!
PAGE 2 OF 9
5PCS
BSIDE GLASS
(1550 x 284mm)
4PCS
CCROSSBAR
3PCSD GLASS SHELF
( 480mm)
1PC
ETOP PANEL
1PC
FBOTTOM PANEL
4PCS
GPLASTIC BAR

ASSEMBLY INSTRUCTIONS
950276
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 9
HARDWARE IDENTIFICATION
1THREAD BOLT
(1/4" x 65mm) 3PCS
2LONG BOLT
(1/4" x 50mm) 2PCS
3FLAT WASHER
( 19mm) 2PCS
4PLASTIC WASHER
( 50mm) 8PCS
5PLASTIC MAGNET
(19mm) 2PCS
6HANGER
(50mm) 1PC
7HANGER INSERT
( 12 x 9mm) 2PCS
8METAL WITH ADHESIVE
(38mm) 2PCS
9SMALL BOLT
( 7 x 6mm) 4PCS
10 LEG
( 44 x 18mm) 6PCS
11 SCREW
( 8 x 22mm) 6PCS
12 HANDLE
(40mm) 1PC
13 METAL HANDLE
(40mm) 1PC
14 ADHESIVE
(38 x 42mm) 2PCS
15 ALLEN WRENCH
(4mm) 1PC
16 STICKER
( 30mm) 1PC

COASTERFURNITURE.COM
PAGE 4 OF 9
ASSEMBLY INSTRUCTIONS
950276
ITEM:
STEP 1
STEP 2
Do not tighten until each step is completed or instructed.
11
10
F
11
10
4
C
D
D
D
F
C
C
C
4
1
4
1
4
1
4
32
4
4
4

COASTERFURNITURE.COM
PAGE 5 OF 9
ASSEMBLY INSTRUCTIONS
950276
ITEM:
STEP 3
STEP 4
BB
G
E3
2
3
2
1
B
B
3
2
1

7
6
5
5
5
7
6
9
8
9
9
98
8
8
A
6
7
COASTERFURNITURE.COM
PAGE 6 OF 9
ASSEMBLY INSTRUCTIONS
950276
ITEM:
STEP 5
STEP 6

COASTERFURNITURE.COM
PAGE 7 OF 9
ASSEMBLY INSTRUCTIONS
950276
ITEM:
STEP 7
STEP 8
A
14
13
12
14 12
14
14
13
16
COMPLETE

COASTERFURNITURE.COM
PAGE 8 OF 9
ASSEMBLY INSTRUCTIONS
950276
ITEM:
Note : Dimension tolerance ±5%
Product Size : 610 X 610 X 1613 H (MM)
Product Size : 24" X 24" X 63 1
2"
63 1
2"
1613 mm
24"
610 mm
24"
610 mm
15"
383 mm
15"
383 mm
15"
383 mm
15"
383 mm

This tip restraint must be attached to a wall STEP 2
stud using long screw enclosed.
STEP 1
STEP 3
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
PAGE 4 OF 4 COASTERFURNITURE.COM
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
ITEM: 205443
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
a plastic wall
950276
PAGE 9 OF 9