Coaster 222880KE User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
222880KE (B1-B3)
REVISION 0 :06 PAGE 1 OF 6 COASTERFURNITURE.COM
Eastern King Storage Bed
/27 /2019

ITEM:
222880KE (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 ( BOX 1)
AHEADBOARD
PANEL 1PC C RIGHT
HEADBOARD LEG 1PC
BLEFT HEADBOARD
LEG 1PC D HEADBOARD BOTTOM RAIL 1PC
B2 ( BOX 2)
ESTORAGE
FOOTBOARD 1PC H BED SLAT
SUPPORT WITH
LEVELER 6PCS
F
ROLL SLAT
(11PCS) 1SET I CONCEAL PANEL 4PCS
GCENTER RAIL SUPPORT WITH
LEVELER 3PCS
B3 ( BOX 3)
J BED RAIL 2PCS HB
222880KE (B1)
FROM BOX 1
HEADBOARD
COMPLETE
1PC
K CENTER RAIL 1PC E
222880KE (B2)
FROM BOX 2
STORAGE
FOOTBOARD
1PC
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
20 MINUTES
PARTS IDENTIFICATION
PAGE 2 OF 6

ITEM:
222880KE (B1-B3)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 222880KE (B1)
1LONG BOLT
(5/16" x 60mm - RBW) 6PCS 4 FLAT WASHER
(5/16" x 19 x 1.5mm -
RBW) 10PCS
2SHORT BOLT
(5/16" x 38mm - RBW) 4PCS 5
ALLEN WRENCH
(4MM - RBW) 1PC
3LOCK WASHER
(5/16" - RBW) 10PCS
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 222880KE (B3)
6FLAT HEAD
SCREW
(4 x 32mm - RBW) 6PCS 11
BOLT
(1/4" x 25mm - RBW) 2PCS
7
THREADED BOLT
(5/16" x 75mm - RBW) 8PCS 12 LOCK WASHER
(1/4" - RBW) 2PCS
8U-SQUARE
WASHER
(25 x 15 x 2mm - RBW) 8PCS 13 FLAT WASHER
(1/4" X 19 X 1.5mm -
RBW) 2PCS
9
HEX NUT
(5/16" x 17mm - RBW) 8PCS 14
ALLEN WRENCH
(4MM - RBW) 1PC
10
WRENCH
(13MM - RBW) 1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 6
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.

ITEM:
222880KE (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 6

ITEM:
222880KE (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COASTERFURNITURE.COM
PAGE 5 OF 6
H
F
Leveler
Adj ustable
6

ITEM:
222880KE (B1-B3)
ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
COMPLETE
COASTERFURNITURE.COM
PAGE 6 OF 6