Coaster Eleanor 223561Q User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
Queen Bed
223561Q
(B1-B3)
PAGE 1 OF 5
REVISION 0 : 11/24/2021 COASTERFURNITURE.COM

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
COASTERFURNITURE.COM
PAGE 2 OF 5
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
30 MINUTES
ITEM:223561Q(B1-B3)
B1 (BOX 1)
AHEADBOARD PANEL 1PC B HEADBOARD BOTTOM RAIL 1PC
CRIGHT
HEADBOARD LEG 1PC D LEFT
HEADBOARD LEG 1PC
B2 (BOX 2)
E FOOTBOARD 1PC
B3 (BOX 3)
F BED RAIL 2PCS G BED SLAT SUPPORT
WITH LEVELER 4PCS
H BED SLAT 4PCS
HB
223561Q (B1)
FROM BOX 1
HEADBOARD
COMPLETE
1PC
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
EFOOTBOARD 1PC
223561Q (B2)
FROM BOX 2

1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1(BOX 1) - HARDWARE PACK IS LOCATED IN 223561Q (B1)
1BOLT
(∅5/16" x 50MM- RBW) 10PCS 2 LOCK WASHER (∅5/6" - RBW) 10PCS
3FLAT WASHER
(∅5/16" - RBW) 10PCS 4 ALLEN WRENCH (4MM - RBW) 1PC
Z-B3(BOX 3) - HARDWARE PACK IS LOCATED IN 223561Q (B3)
5THREADED BOLT
(∅5/16" x 3-1/2" - RBW) 8PCS 6 HEX NUT (∅5/16" x 14mm - RBW) 8PCS
7WRENCH
(14MM - RBW) 1PC HALF ROUND NUT (∅5/16'' - RBW) 8PCS
9FLAT HEAD SCREW
(∅4 x 30mm - RBW) 8PCS
NOTE:
COASTERFURNITURE.COM
PAGE 3 OF 5
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ITEM:223561Q(B1-B3)
8

ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 5
A
B
C
D
1
2
3
4
3
2
1
4
5
6
7
E
F
F
ITEM:223561Q(B1-B3)

ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
COASTERFURNITURE.COM
PAGE 5 OF 5
G
H
H
F
ITEM:223561Q(B1-B3)

Note: Dimension tolerance ±5%
INNER SIZE OF BED: 61.4'' X 81.5''
COASTERFURNITURE.COM
10
10"
10.4"
57"
Slat Floor
63"
36"
62"
86"
63.6"
23"
7"
3.3"
ITEM:223561Q(B1-B3)