Cobalt Digital Inc BBG-1003-UDX-ADDA User manual

2506 Galen Drive
Champaign, IL 61821
Voice 217.344.1243 • Fax [phone]
www.cobaltdigital.com
Product Manual
BBG1003UDXADDA-OM (V1.2)
Cobalt Digital Inc.
3G/HD/SD-SDI Standalone Universal Format
Converter/Frame Sync with CVBS/YPbPr Video I/O, UDX
Conversion, AES, and Analog Audio Embedding / De-Embedding
BBG-1003-UDX-ADDA
BBG-1003-UDX-ADDA

Copyright
©Copyright 2017, Cobalt Digital Inc. All Rights Reserved.
Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written
permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or
transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.
Reproduction or reverse engineering of software used in this device is prohibited.
Disclaimer
The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve
readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any
product or circuit described herein.
Trademark Information
Cobalt®is a registered trademark of Cobalt Digital Inc.
openGear®is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.
Dolby®is a registered trademark of Dolby Laboratories, Inc. Other product names or trademarks appearing in this manual are the
property of their respective owners.
Congratulations on choosing the Cobalt®3G/HD/SD-SDI Standalone Universal Format Converter/Frame Sync
with CVBS/YPbPr Video I/O, UDX Conversion, AES, and Analog Audio Embedding / De-Embedding. The
BBG-1003-UDX-ADDA is part of a full line of modular processing and conversion gear for broadcast TV
environments. The Cobalt Digital Inc. line includes video decoders and encoders, audio embedders and de-
embedders, distribution amplifiers, format converters, remote control systems and much more. Should you
have questions pertaining to the installation or operation of your BBG-1003-UDX-ADDA, please contact us at
the contact information on the front cover.
Manual No.: BBG1003UDXADDA-OM
Document Version: V1.2
Release Date: March 8, 2017
Applicable for
Firmware Version
(or greater): v1.225 or greater
Description of
product/manual
changes:
- Update manual for latest card functionality, including new standard
feature and available options. (This firmware version has significant
user interface changes versus prior firmware versions and the use
of this new Product Manual is strongly recommended.)
- Minor errata corrections (references to character burn and 4-
channel analog audio I/O, which this product does not provide, and
corrections to AFD function).
BBG1003UDXADDA-OM (V1.2)

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL i
Table of Contents
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Overview ................................................................................................................ 1-1
Cobalt Reference Guides........................................................................................ 1-2
Manual Conventions............................................................................................... 1-2
Warnings, Cautions, and Notes .................................................................. 1-3
Labeling Symbol Definitions...................................................................... 1-3
Safety and Regulatory Summary............................................................................ 1-4
Warnings..................................................................................................... 1-4
Cautions...................................................................................................... 1-4
EMC Compliance Per Market .................................................................... 1-4
BBG-1003-UDX-ADDA Functional Description.................................................. 1-5
BBG-1003-UDX-ADDA Input/Output Formats........................................ 1-5
Video Processor Description ...................................................................... 1-7
Audio Processor Description.................................................................... 1-10
Control and Data Input/Output Interfaces ................................................ 1-11
User Control Interface .............................................................................. 1-12
Technical Specifications....................................................................................... 1-12
Warranty and Service Information ....................................................................... 1-16
Cobalt Digital Inc. Limited Warranty....................................................... 1-16
Contact Cobalt Digital Inc.................................................................................... 1-17
Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Overview ................................................................................................................ 2-1
Installing the BBG-1003-UDX-ADDA.................................................................. 2-1
Installing Using BBG-1000-TRAY Optional Mounting Tray ................... 2-1
BBG-1003-UDX-ADDA Unit Dimensions................................................ 2-2
Rear Panel Connections.......................................................................................... 2-2
GPIO, Serial (COMM), and Analog Audio Connections....................................... 2-5
Chapter 3 Setup/Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Overview ................................................................................................................ 3-1
BBG-1003 Front Panel Display and Menu-Accessed Control............................... 3-1
Connecting BBG-1003 To Your Network.............................................................. 3-3
Finding a BBG-1003 Device in DashBoard............................................... 3-4
Control and Display Descriptions........................................................................... 3-5
Function Submenu/Parameter Submenu Overview.................................... 3-5
Web User Interface..................................................................................... 3-6
Display Theme............................................................................................ 3-7

ii BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Checking BBG-1003-UDX-ADDA Device Information........................................ 3-8
Ancillary Data Line Number Locations and Ranges .............................................. 3-9
BBG-1003-UDX-ADDA Function Menu List and Descriptions.......................... 3-10
Input Video Controls ................................................................................ 3-11
Output Video Mode Controls ................................................................... 3-12
Scaler ........................................................................................................ 3-13
Framesync ................................................................................................ 3-16
Input Audio Status .................................................................................... 3-19
Input Audio Routing/Controls .................................................................. 3-20
Video Proc/Color Correction ................................................................... 3-25
Output Audio Routing/Controls ............................................................... 3-28
AFD/WSS/VI Code Insertion Controls .................................................... 3-33
Timecode .................................................................................................. 3-39
Closed Captioning .................................................................................... 3-44
Ancillary Data Proc Controls ................................................................... 3-45
COMM Ports Setup Controls ................................................................... 3-50
GPO Setup Controls ................................................................................. 3-50
Presets ...................................................................................................... 3-51
Event Setup .............................................................................................. 3-53
Admin (Log Status/Firmware Update - Card IP Address) ....................... 3-56
User Log ................................................................................................... 3-57
Uploading Firmware Using Web Interface and GUI............................................ 3-58
Front Panel User Menus........................................................................................ 3-59
Troubleshooting .................................................................................................... 3-61
Error and Failure Indicator Overview....................................................... 3-61
Basic Troubleshooting Checks.................................................................. 3-63
BBG-1003-UDX-ADDA Processing Error Troubleshooting................... 3-64
In Case of Problems .................................................................................. 3-65

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-1
Chapter 1
Chapter 1 Introduction
Overview
This manual provides installation and operating instructions for the
BBG-1003-UDX-ADDA 3G/HD/SD-SDI Standalone Universal Format
Converter/Frame Sync with CVBS/YPbPr Video I/O, UDX Conversion, AES,
and Analog Audio Embedding / De-Embedding unit (also referred to herein as
the BBG-1003-UDX-ADDA).
Note: The BBG-1003-UDX-ADDA is offered in several model variants in which the
only differences are rear panel connector assortment variances. This manual
is applicable for all BBG-1003-UDX-ADDA models. Differences between the
various models are noted where applicable. In all other aspects, all versions
function identically as described in this manual.
This manual consists of the following chapters:
•Chapter 1, “Introduction”–Provides information about thismanual
and what is covered. Also provides general information regarding the
BBG-1003-UDX-ADDA.
•Chapter 2, “Installation”–Provides instructions for installing the
BBG-1003-UDX-ADDA and setting up its network access.
•Chapter 3, “Setup/Operating Instructions”–Provides overviews
of operating controls and instructions for using the
BBG-1003-UDX-ADDA.
This chapter contains the following information:
•Cobalt Reference Guides (p. 1-2)
•Manual Conventions (p. 1-2)
•Safety and Regulatory Summary (p. 1-4)
•BBG-1003-UDX-ADDA Functional Description (p. 1-5)
•Technical Specifications (p. 1-12)
•Warranty and Service Information (p. 1-16)
•Contact Cobalt Digital Inc. (p. 1-17)

1Cobalt Reference Guides
1-2 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Cobalt Reference Guides
From the Cobalt®web home page, go to Support>Reference Documents for
easy to use guides covering network remote control, device firmware updates,
example processing UI setups and other topics.
Manual Conventions
In this manual, display messages and connectors are shown using the exact
name shown on the BBG-1003-UDX-ADDA itself. Examples are provided
below.
•Device display messages are shown like this:
•Connector names are shown like this: SDI IN A
In this manual, the terms below are applicable as follows:
•BBG-1003-UDX-ADDA refers to the BBG-1003-UDX-ADDA 3G/
HD/SD-SDI Standalone Universal Format Converter/Frame Sync
with CVBS/YPbPr Video I/O, UDX Conversion, AES, and Analog
Audio Embedding / De-Embedding unit.
•Frame refers to the HPF-9000, OG3-FR, 8321, or similar 20-slot
frame that houses Cobalt®or other cards.
•Device and/or Card refers to a Cobalt®or other card/devices.
•System and/or Video System refers to the mix of interconnected
production and terminal equipment in which the
BBG-1003-UDX-ADDA and other devices operate.
•Functions and/or features that are available only as an option are
denoted in this manual like this:
Most options are covered in this manual. However, if your device has
DashBoard tabs that are not described in this manual it indicates that
the optional function/feature is covered in a separate Manual
Supplement.
If your have not received a Manual Supplement for options on your
device, you can download a pdf for the option by going to the device
web page and clicking on Product Downloads, where you can select
from any available option Manual Supplements.
BBG-1003

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-3
Introduction Manual Conventions
Warnings, Cautions, and Notes
Certain items in this manual are highlighted by special messages. The
definitions are provided below.
Warnings
Warning messages indicate a possible hazard which, if not avoided, could
result in personal injury or death.
Cautions
Caution messages indicate a problem or incorrect practice which, if not
avoided, could result in improper operation or damage to the product.
Notes
Notes provide supplemental information to the accompanying text. Notes
typically precede the text to which they apply.
Labeling Symbol Definitions
Important note regarding product usage. Failure to observe may result in
unexpected or incorrect operation.
Electronic device or assembly is susceptible to damage from an ESD
event. Handle only using appropriate ESD prevention practices.
If ESD wrist strap is not available, handle only by edges and avoid
contact with any connectors or components.
Symbol (WEEE 2002/96/EC)
For product disposal, ensure the following:
•Do not dispose of this product as unsorted municipal waste.
•Collect this product separately.
•Use collection and return systems available to you.

1Safety and Regulatory Summary
1-4 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Safety and Regulatory Summary
Warnings
Cautions
EMC Compliance Per Market
! WARNING ! To reduce risk of electric shock do not remove line voltage service barrier cover on frame
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION This device is intended for environmentally controlled use only in appropriate video
terminal equipment operating environments.
CAUTION This device contains no user-serviceable components. Refer servicing to authorized
personnel.
CAUTION This device is intended for use ONLY with specified power supplies. Power connection to
unauthorized sources may cause product damage, unreliable operation, and invalidate
warranty.
CAUTION The BBG-1003-UDX-ADDA FPGA is designed for a normal-range operating temperature
around 85° C core temperature. Operation in severe conditions exceeding this limit for
non-sustained usage are within device operating safe parameters, and can be allowed by
setting this control to Disable. However, the disable (override) setting should be avoided
under normal conditions to ensure maximum device protection.
Market Regulatory Standard or Code
United States of America FCC "Code of Federal Regulations" Title 47 Part15, Subpart B, Class A
Canada ICES-003
International CISPR 24:2010
IEC 61000-4-2:2008
IEC 61000-4-3:2006 with A1:2007 and A2:2010 IEC 61000-4-4:2004
IEC 61000-4-6:2008
IEC 61000-6-3:2006 with A1:2010
CISPR 22:2008

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-5
Introduction BBG-1003-UDX-ADDA Functional Description
BBG-1003-UDX-ADDA Functional Description
Figure 1-1 shows a functional block diagram of the BBG-1003-UDX-ADDA.
The BBG-1003-UDX-ADDA also includes AES/analog audio support and
CVBS/component video I/O. A basic signal presence input failover function
allows routing from an alternate SDI source when an input LOS is detected.
The BBG-1003-UDX-ADDA also provides ARC processing and timecode/
closed-captioning conversion from packet-based timecode formats and
CEA608/708 HD formats to HD ATC, SD_ATC, and SD VITC-based
(waveform) timecode. Closed captioning from CEA708 to HD formats and
line 21 SD closed captioning are available on the processed HD-SD-SDI
outputs.
BBG-1003-UDX-ADDA Input/Output Formats
The BBG-1003-UDX-ADDA provides the following inputs and outputs:
•Inputs:
•3G/HD/SD SDI IN A thru SDI IN D –four 3G/HD/SD-SDI inputs.
SDI IN A or SDI IN B can be set to failover to Aor Bin absence of
opposite channel of this pair.
•CVBS/YPbPr IN –CVBS and component coaxial analog video input
which can receive SD/HD analog video for processing and
up-conversion.
•AES IN –BNC (AES-3id, 75Ω) ports as AES input (number of
ports dependent on model).
•AN-AUD IN –Two balanced analog audio embed inputs.
•Outputs:
•3G/HD/SD-SDI OUT (1-4) –four 3G/HD/SD-SDI buffered video
outputs.
•AES OUT –BNC (AES-3id, 75Ω) ports as AES outputs (number of
ports dependent on model).
•AN-AUD OUT –Two balanced analog audio de-embed outputs.
•CVBS/YPbPr OUT –CVBS and component coaxial analog video
outputs.

1BBG-1003-UDX-ADDA Functional Description
1-6 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Figure 1-1 BBG-1003-UDX-ADDA Functional Block Diagram
EQ/
Reclock
Audio
Demux
Audio
Mux
Delay
Offset
Output
Routing
1x4 Output
DA
3G/HD/SD
SDI IN A
1003BD V1.0LB101
Deserialize
PROC VIDEO OUT (SDI)
EQ/
Reclock
3G/HD/SD
SDI IN B
Video
ADC
CVBS IN
YPbPr IN
Input Select/
Failover
GPIO
Control/
Monitor
Timecode
Select/Proc
Up/Down/Cross
Conversion/ARC
Framesync/
Pattern Gen
Video
DAC
1 2 3 4
Serialize
AES
Rx
Audio
ADC
AES IN
AN-AUD IN
AES
Tx
Audio
DAC
AES OUT
AN-AUD OUT
EQ/
Reclock
3G/HD/SD
SDI IN C
EQ/
Reclock
3G/HD/SD
SDI IN D
HANC/VANC
Ancillary Data
Extract/Insert
IP, Serial Data I/O
Video Proc/
Color
Corrector
CVBS OUT YPbPr IN
LTC I/O
Audio LTC I/O
Notes:
1. Signal connections shown depicts full input/output capability.
Practical input/output signal availability is determined by device model.
2. (BBG-1003-UDX-ADDA-F only) SDI output RLY BYP B outputs a
copy of SDI OUT 1 crosspoint selection in normal operation. In power loss failover RLY BYP B passive outputs SDI IN B.
REF LOOP

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-7
Introduction BBG-1003-UDX-ADDA Functional Description
Video Processor Description
The BBG-1003-UDX-ADDA features a up/down/cross-convert scaler, frame
sync, and user-adjustable aspect ratio control and zoom control. The
BBG-1003-UDX-ADDA video subsystem also provides the functions
described below.
Input Video Select
A GUI-based control allows the device to select from up to four 3G/HD/
SD-SDI inputs, and a SD CVBS or HD/SD YPbPr component analog video
input. For analog inputs, waveform-based ancillary data is preserved for
extraction and usage later in the processing chain. Analog video processing
uses 10-bit processing with 5-line adaptive comb filtered SD Y/C separation.
A raster size/rate user input select filter tool can set the device to accept only
specified raster size/rates, while rejecting other inputs that do not conform.
The input can be selected using user manual control, set to failover to an
alternate input upon loss of the target input, and can be externally selected via
a GPIO interface. All SDI input ports feature RP168 clean switching
performed on the specified VBI switch line when a user-selected input change
is effected.
Timecode Processor
(See Figure 1-2.) This function provides for extraction of timecode data from
input video source, and in turn allow individual timecode strings to be
embedded in the output video. The function can monitor any of the video
inputs for supported timecode formats such as ATC_LTC or ATC_VITC for
down-conversions to HD, and ATC_VITC or VITC waveform (with
selectable odd/even field line number control) for SD SDI or CVBS inputs.
Waveform VITC timecode can also be extracted from a reference input and
used as the output timecode value. If the preferred format is detected, the
preferred format is used; if the preferred format is not detected, other formats
(where available) can be used as desired. An internally-generated free-run
timecode can be also be embedded on output video if desired.
The function also provides conversion between various timecode formats and
provides independent insertion and line number controls for each SDI
timecode output format.
When licensed with option +LTC, this function also can
receive, send and translate between audio/RS-485 LTC timecode formats and
the VBI formats described above.

1BBG-1003-UDX-ADDA Functional Description
1-8 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Figure 1-2 Timecode Processor
Frame Sync Function
This function provides for frame sync control using a looping external
reference signal, or the input video as a frame sync reference.
This function also allows horizontal and/or vertical offset to be added
between the output video and the frame sync reference.
In the event of input video loss of signal, the output can be set to disable
video, go to black, go to an internal test signal generator pattern, or freeze to
the last intact frame (last frame having valid SAV and EAV codes).
An internal test signal generator provides a selection of various standard
patterns such as color bars, sweep patterns, and other technical patterns. The
test patterns can be applied to the output video upon loss of input or manually
inserted at any time.
Frame
Reference
SDI VITC
Waveform
Detect/Extract
SDI ATC_LTC
Detect/Extract
SDI ATC_VITC
Detect/Extract
Priority/
Select
Program
Video
Input
SDI VITC
Timecode
Proc/Embed
ATC_VITC
Timecode
Proc/Embed
ATC_LTC
Timecode
Proc/Embed
Insert
Control
Line
Number
Control
Buffer/
Format
3G/HD/SD–SDI
(From UDX Scaler)
Free Run
(Internal Count)
Ref VITC
Waveform
Detect/Extract
Audio LTC
Select/Extract
Audio/
RS-485 LTC Audio/RS-485
LTC Generate
Audio LTC Out
RS-485 LTC Out

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-9
Introduction BBG-1003-UDX-ADDA Functional Description
Scaler Function
The scaler function provides up/down/cross-conversion to 3G/HD/SD from
multiple SD and 3G/HD video formats and multiple frame rates, and
cross-conversion between interlaced and progressive formats, with
auto-format detect/down-conversion of SMPTE 424M/292M/259M formats.
The scaler function also provides aspect ratio conversion that provides a
choice from several standard aspect ratios. Additionally, user defined and
“Follow AFD Settings”conversion can be applied. User defined settings
allow custom user-defined H and V aspect ratio control. “Follow AFD
Settings”sets the output aspect ratio to track with AFD (Active Format
Description) settings embedded in the received video signal. Reticule
insertion provides safe action area marking as well as other reticule functions
and patterns.
Closed Captioning Processor
This function provides support for closed captioning setup. The function
allows the selection of the ancillary data line number where the ancillary
closed caption data is outputted when the output is HD. When receiving
HD-SDI, both CEA 608 and CEA 708 are supported, with CEA 608 and
CEA 708 (containing CEA 608 packets) converted to line 21 closed
captioning on outputs down-converted to SD.
Color Corrector
Option +COLOR converts the YCbCr SDI input video to the 4:4:4 RGB color
space (where the color correction is applied), and then back to YCbCr SDI on
the output. Controls are available to adjust each RGB level independently for
both white levels (gain) and black levels (offset). Gamma can also be
independently adjusted for each RGB channels. Various controls can be
ganged to provide adjustment for all three color channels simultaneously.
Ancillary Data Processor
This function provides full VANC/HANC ancillary data de-embedding and
embedding for 3G/HD/SD-SDI streams. Direct access to DID and SDID
locations allows extraction or insertion of user data such as camera PTZ,
SCTE 104, closed-captioning read/insert, GPI/GPO via ANC, or other
specialized user payloads. Data can be extracted and inserted within the
device, bypassing the scaler (Bridge mode), or inserted and/or extracted to
and from the device via serial or IP interfaces connecting to external devices/
systems.

1BBG-1003-UDX-ADDA Functional Description
1-10 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Audio Processor Description
The audio processor operates as an internal audio router. This function
chooses from the following inputs:
•16 channels of embedded audio from the SDI video input (default
1-to-1 routing to SDI output)
•Up to 16 channels (8 pairs) of discrete AES input1
•Up to 4 channels of balanced analog audio input
(See Figure 1-3.) The audio processing subsection is built around an internal
16-channel audio bus. This 16-channel bus receives inputs from an input
routing crosspoint that routes de-embedded, and discrete AES and analog
audio inputs, over the 16-channel device bus. Correspondingly, at the output
end of the 16-channel bus is an output routing crosspoint that in turn
distributes the 16-channel bus signals to embedded, and discrete AES and
analog audio outputs.
An Input Audio Status display shows the presence and peak level of each
input audio channel received. In addition to SDI embedded audio channel
sources, analog and coaxial AES inputs are available as input audio choices.
For AES audio inputs, payload is identified (PCM or data such as Dolby®
Digital or E).Each AES input pair has independent sample rate converters to
align each input pair with video timing to accommodate cases where AES
audio is not synchronous with input video (SRC automatically bypassed for
non-PCM payloads). As such, the audio subsection provides a full crosspoint
between all supported audio inputs and output types.
Figure 1-3 Basic Audio Processing Block Diagram
1. Discrete audio I/O channel count is dependent on model. Current models may not support maximum
number of available discrete channels.
De-Embed IN 1-16
(from Program
Video De-Embed)
AES
Rx/SRC
Input Routing
Internal
Bus
Routing/Gain/
Mute/Invert
Controls
Analog
Audio
ADC
Audio
Meters
AES IN
AN-AUD
IN
Audio
Delay
Offset
Control
Internal Bus Controls
Ref
Dolby E
Alignment
Control
Output Routing
Routing/Gain/
Mute/Invert
Controls
Audio
Meters
AES
Tx
Analog
Audio
DAC
AES OUT
AN-AUD
OUT
Embed 1-16
(to Program Video
Embed)
9902AUD V1.0LB89
Downmix

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-11
Introduction BBG-1003-UDX-ADDA Functional Description
Audio Down Mix Function
(See Figure 1-4.) The Audio Down Mixer function provides for the selection
of any five embedded channels serving as Left (L), Right (R), Center (C), Left
Surround (Ls), and Right Surround (Rs) individual signals to be multiplexed
into stereo pair Down Mix Left (DM-L) and Down Mix Right (DM-R). The
resulting stereo pair DM-L and DM-R can in turn be routed to any embedded
audio pair as desired (or de-embedded to an AES or analog audio output).
Figure 1-4 Audio Down Mix Functional Block Diagram with Example Sources
Flex Buses
For both input and output nodes before and after the device internal buses,
flex buses provide flexible-structure mixer in which any of 16 summing
nodes (Flex Mix Bus A thru Flex Mix Bus P) can receive any audio input,
thereby allowing several customizable mixing schemes. Similarly, any of the
16 internal bus signals can be applied to an output flex bus mixer.
Control and Data Input/Output Interfaces
GPI Interface
Two independent ground-closure sensing GPI inputs (GPI 1 and GPI 2; each
sharing common ground connection as chassis potential) are available.
Associated with each GPI user control is a selection of one of 32 user-defined
device presets in which GPI activation invokes a device control preset.
Because the GPI closure invokes a user-defined preset, the resulting setup is
highly flexible and totally user-defined. Invoking a user preset to effect a
change involves device setup communication limited only to the items being
changed; the device remains on-line during the setup, and the called preset is
rapidly applied.
GPI triggering can be user selected to consider the activity on discrete GPI
ports, or combinations of logic states considering both GPI inputs, as well as
be set for level or edge triggering. This flexibility allows multistage,
progressive actions to be invoked if desired. Indication is provided showing
whenever a GPI input has been invoked.
DM-L
L
R
C
Ls
Rs
DM-R
Emb Ch 1
Emb Ch 2
Emb Ch 3
Emb Ch 5
Emb Ch 6
Embed Ch 1 - Ch 16

1Technical Specifications
1-12 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
GPO Interface
Two independent phototransistor non-referenced (floating) contact pairs
(GPO 1/1 and GPO 2/2) are available. A GPO can be invoked by setting a GPO
to be enabled when a device preset is in turn applied (i.e., when a preset is
invoked (either manually or via event-based loading), the GPO is
correspondingly also activated.
Serial (COMM) Ports
The BBG-1003-UDX-ADDA is equipped with two, 3-wire serial ports (COM
1 - Serial Port 1, COM 2 - Serial Port 2). The ports provide for SMPTE 2020
de-embedding to an output port, and provide RS-485 LTC I/O (when licensed
with option +LTC), and can be used with the Ancillary Data Processor option
for data insertion or extraction. Either port can be configured as RS-232 Tx/
Rx or RS-4585 non-duplexed Tx or Rx.
+SCTE104 Insertion
Option +SCTE104 provides generation and insertion of SCTE 104 messages
into baseband SDI. Message send can be triggered from automation GPI or
other event action modes. The option can also execute actions based on SCTE
104 messages received by the device, as well as send triggered SCTE 104
packets to other downstream systems.
The user interface is based on common SCTE 104 operations: Splice Start
Normal, Splice Start Intermediate, Splice End Normal, Splice End
Intermediate, and Splice Cancel (splice_request_data variants), offering full
control of splice start, end, and cancel as well as pre-roll and break duration
offsets. (A Manual Supplement is planned for this option. Please check
product web page.)
User Control Interface
BBG-1003-UDX-ADDA uses an HTML5 internal web server for control/
monitoring communication, which allows control via a web interface with no
special or unique application on the client device. Connection to the device to
the network media connection is via a standard 10/100/1000 RJ-45 Ethernet
connection. The device can also be controlled using DashBoard™remote
control, where it appears as a frame connection.
Technical Specifications
Table 1-1 lists the technical specifications for the BBG-1003-UDX-ADDA
3G/HD/SD-SDI Standalone Universal Format Converter/Frame Sync with
CVBS/YPbPr Video I/O, UDX Conversion, AES, and Analog Audio
Embedding / De-Embedding unit.
Note: I/O listed are maximum device capacities. I/O depends on BBG-1003 model.
See Part number, nomenclature below for details.

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-13
Introduction Technical Specifications
Table 1-1 Technical Specifications
Item Characteristic
Part number, nomenclature •BBG-1003-UDX-ADDA 3G/HD/SD-SDI Standalone Universal
Format Converter/Frame Sync with CVBS/YPbPr Video I/O, UDX
Conversion, AES, and Analog Audio Embedding /
De-Embedding, available in the following rear-panel I/O
configurations:
-BBG-1003-UDX-ADDA-B (1) 3G/HD/SD-SDI Input BNC, (1)
CVBS Input BNCs, (2) Balanced Analog Audio Inputs, (1) 3G/
HD/SD-SDI Output BNCs, Component/CVBS Video Out BNC,
(2) Balanced Analog Audio Outputs
-BBG-1003-UDX-ADDA-D-DIN (2) 3G/HD/SD-SDI Inputs, (1)
CVBS Input, (8) AES Inputs, (2) Balanced Analog Audio Inputs,
(2) 3G/HD/SD-SDI Outputs, (1) CVBS Processed Output, (8)
AES Outputs, (2) Balanced Analog Audio Outputs (All coaxial
connectors DIN1.0/2.3.)
-BBG-1003-UDX-ADDA-D-HDBNC (2) 3G/HD/SD-SDI Inputs,
(1) CVBS Input, (8) AES Inputs, (2) Balanced Analog Audio
Inputs, (2) 3G/HD/SD-SDI Outputs, (1) CVBS Processed
Output, (8) AES Outputs, (2) Balanced Analog Audio Outputs
(All coaxial connectors HD-BNC.)
-BBG-1003-UDX-ADDA-E (1) 3G/HD/SD-SDI Input BNCs,
Component/CVBS Video In BNCs, (1) AES In BNC, (2)
Balanced Analog Audio Inputs, (2) 3G/HD/SD-SDI Output
BNCs, (1) GPIO/COMM RJ-45 connector
-BBG-1003-UDX-ADDA-F (2) 3G/HD/SD-SDI Input BNCs,
Component/CVBS Video Out BNCs, (1) AES Out BNC, (2)
Balanced Analog Audio Outputs, (1) 3G/HD/SD-SDI Output
BNC, (1) GPIO/COMM RJ-45 connector
Power consumption < 13 Watts. Power provided by included AC adapter;
100-240 VAC, 50/60 Hz. Second DC power connection allows
power redundancy using second (optional) AC adapter.
Environmental:
Operating temperature:
Relative humidity (operating or storage):
Dimensions (WxHxD):
Weight:
32°–104°F (0°–40°C)
< 95%, non-condensing
5.7 x 1.4 x 14.7 in (14.5 x 3.5 x 37.3 cm) Dimensions include
connector projections.
6 lb (2.8 kg)
Ethernet communication 10/100/1000 Mbps Ethernet with Auto-MDIX via HTML5 web
interface
Front-Panel Controls and Indicators Backlit LCD display and menu navigation keys. Display and
controls provide unit status display and full control as an alternate
to web GUI control.
Serial Digital Video Input Up to (4) 75ΩBNC, with manual select or failover to alternate
input.
SDI Formats Supported: SMPTE 259M, SMPTE 292M,
SMPTE 424M

1Technical Specifications
1-14 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Serial Digital Video Input (cont.) SDI Receive Cable Length: 3G/HD/SD: 120/180/320 m (Belden
1694A)
SDI Return Loss: >15 dB up to 1.485 GHz; >10 dB up to
2.970 GHz
SDI Alignment Jitter: 3G/HD/SD: < 0.3/0.2/0.2 UI
Timing Jitter: 3G/HD/SD: < 2.0/1.0/0.2 UI
Analog Video Input Number of Inputs:
One SD analog CVBS; 3-connector YPbPr component. CVBS
can be upscaled to any supported SDI format.
Impedance: 75 Ω
ADC resolution: 10-bit
Sampling frequency: 54 MHz (4x over-sampling SD)
SD Y/C separation: 5 line Adaptive Comb Filter
SD Freq. Response: ± 0.25 dB to 5.5 MHz
SD SNR: > 55 dB to 5.5 MHz (unweighted)
Differential Phase: < 1 degree
Differential Gain: < 1%
Nonlinearity < 1%
HD Freq. Response: Y 30 MHz., PbPr 15 MHz
HD SNR: > 55 dB to 30 MHz (unweighted)
AES Audio Inputs Standard:
SMPTE 276M
Number of Inputs:
Up to 16 unbalanced; AES-3id
Impedance:
75 Ω
Analog Audio Inputs Number of Inputs:
Two balanced using 3-wire removable Phoenix connectors;
0 dBFS => +24 dBu
Input Impedance: >10 kΩ
Reference Level: -20 dBFS
Nominal Level: +4 dBu
Input Clip Level: +24 dBu (0 dBFS)
Freq. Response: ±0.2 dB (20 Hz to 20 kHz)
SNR: 115 dB (A weighted)
THD+N: -96 dB (20 Hz to 10 kHz)
Crosstalk: -106 dB (20 Hz to 20 kHz)
Table 1-1 Technical Specifications — continued
Item Characteristic

BBG1003UDXADDA-OM (V1.2) BBG-1003-UDX-ADDA PRODUCT MANUAL 1-15
Introduction Technical Specifications
Post-Processor Serial Digital Video
Outputs Number of Outputs:
Four 3G/HD/SD-SDI BNC
Impedance:
75 Ω
Return Loss:
> 15 dB at 5 MHz –270 MHz
Signal Level:
800 mV ± 10%
DC Offset:
0 V ± 50 mV
Jitter (3G/HD/SD):
< 0.3/0.2/0.2 UI
Analog Video Output Number of Outputs:
One SD analog CVBS; 3-connector YPbPr component.
Impedance:
75 Ω
AES Audio Outputs Standard:
SMPTE 276M
Number of Outputs:
Up to 16 unbalanced; AES-3id
Impedance:
75 Ω
Analog Audio Outputs Number of Outputs:
Two balanced using 3-wire removable Phoenix connectors;
0 dBFS => +24 dBu
Frame Reference Input Looping 2-BNC connection. SMPTE 170M/318M “Black Burst”,
SMPTE 274M/296M “Tri-Level”
Return Loss: >35 dB up to 5.75 MHz
GPIO (2) GPI; (2) GPO; opto-isolated
GPO Specifications:
Max I: 120 mA
Max V: 30 V
Max P: 120 mW
GPI Specifications:
GPI LO @ Vin < 1.5 V
GPI HI @ Vin > 2.3 V
Max Vin: 9 V
Redundant (or spare) AC power supply BBG-1000-PS
Table 1-1 Technical Specifications —continued
Item Characteristic

1Warranty and Service Information
1-16 BBG-1003-UDX-ADDA PRODUCT MANUAL BBG1003UDXADDA-OM (V1.2)
Warranty and Service Information
Cobalt Digital Inc. Limited Warranty
This product is warranted to be free from defects in material and workmanship for a period of five (5)
years from the date of shipment to the original purchaser, except that 4000, 5000, 6000, 8000 series
power supplies, and Dolby®modules (where applicable) are warranted to be free from defects in
material and workmanship for a period of one (1) year.
Cobalt Digital Inc.'s (“Cobalt”) sole obligation under this warranty shall be limited to, at its option, (i)
the repair or (ii) replacement of the product, and the determination of whether a defect is covered under
this limited warranty shall be made at the sole discretion of Cobalt.
This limited warranty applies only to the original end-purchaser of the product, and is not assignable or
transferrable therefrom. This warranty is limited to defects in material and workmanship, and shall not
apply to acts of God, accidents, or negligence on behalf of the purchaser, and shall be voided upon the
misuse, abuse, alteration, or modification of the product. Only Cobalt authorized factory
representatives are authorized to make repairs to the product, and any unauthorized attempt to repair
this product shall immediately void the warranty. Please contact Cobalt Technical Support for more
information.
To facilitate the resolution of warranty related issues, Cobalt recommends registering the product by
completing and returning a product registration form. In the event of a warrantable defect, the
purchaser shall notify Cobalt with a description of the problem, and Cobalt shall provide the purchaser
with a Return Material Authorization (“RMA”). For return, defective products should be double boxed,
and sufficiently protected, in the original packaging, or equivalent, and shipped to the Cobalt Factory
Service Center, postage prepaid and insured for the purchase price. The purchaser should include the
RMA number, description of the problem encountered, date purchased, name of dealer purchased
from, and serial number with the shipment.
Cobalt Digital Inc. Factory Service Center
2506 Galen Drive Office: [phone]
Champaign, IL 61821 USA Fax: [phone]
www.cobaltdigital.com Email: [email protected]
THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE AND OF ALL OTHER OBLIGATIONS OR
LIABILITIES ON COBALT'S PART. ANY SOFTWARE PROVIDED WITH, OR FOR USE WITH,
THE PRODUCT IS PROVIDED “AS IS.”THE BUYER OF THE PRODUCT ACKNOWLEDGES
THAT NO OTHER REPRESENTATIONS WERE MADE OR RELIED UPON WITH RESPECT TO
THE QUALITY AND FUNCTION OF THE GOODS HEREIN SOLD. COBALT PRODUCTS ARE
NOT AUTHORIZED FOR USE IN LIFE SUPPORT APPLICATIONS.
COBALT'S LIABILITY, WHETHER IN CONTRACT, TORT, WARRANTY, OR OTHERWISE, IS
LIMITED TO THE REPAIR OR REPLACEMENT, AT ITS OPTION, OF ANY DEFECTIVE
PRODUCT, AND SHALL IN NO EVENT INCLUDE SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS), EVEN IF IT HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.