Cochlear CP900 Series User manual

TrueWireless™
Accessories
User Guide

ii TRUE WIRELESS ACCESSORIES USER GUIDE
Symbols
NOTE
Important information or advice.
TIP
Time saving hint.
CAUTION (no harm)
Special care to be taken to ensure safety and effectiveness.
Could cause damage to equipment.
WARNING (harmful)
Potential safety hazards and serious adverse reactions.
Could cause harm to person.
This document contains information on how to use the
Cochlear™True Wireless™Accessories with the following sound
processors:
• Cochlear Nucleus®CP900 Series Sound Processors
• Cochlear Nucleus Kanso®Sound Processor
• Cochlear Nucleus 7 Sound Processor
• Cochlear Nucleus Kanso 2 Sound Processor.
Read this document carefully, and the other user guides it refers
to, to ensure that you understand how to use these accessories
with your system.

1TRUE WIRELESS ACCESSORIES USER GUIDE
Contents
About this guide.....................................................................................2
Wireless accessories..............................................................................4
Getting started....................................................................................... 5
Mini Microphone 2 & Mini Microphone 2+.....................................6
Operating characteristics .............................................................. 6
Preparing for use..............................................................................8
Step 1: Pair your Mini Microphone.............................................. 10
Step 2: Stream audio from your Mini Microphone..................12
Using your Mini Microphone........................................................16
Volume control................................................................................17
Additional features - Mini Microphone 2+................................20
TV Streamer ............................................................................................ 22
Operating characteristics .............................................................. 22
Step 1: Pair your TV Streamer....................................................... 23
Step 2: Stream audio from your TV Streamer ..........................26
Volume control................................................................................30
Adjustable delay mode ..................................................................31
Phone Clip ...............................................................................................32
Operating characteristics .............................................................. 32
Charge your Phone Clip .................................................................33
Step 1: Pair your Phone Clip..........................................................34
Step 2: Use your Phone Clip..........................................................36
Using multiple accessories ..................................................................38
To pair multiple wireless accessories..........................................39
To stream audio with multiple wireless accessories ............... 39
Check the wireless microphone performance.................................40
Change the accessory mixing ratio ................................................... 42
Cautions................................................................................................... 43
Warnings..................................................................................................44
Magnetic resonance imaging (MRI)............................................ 44
Care and maintenance ......................................................................... 45
Certification ............................................................................................47
Legal statement .....................................................................................47

2TRUE WIRELESS ACCESSORIES USER GUIDE
About this guide
This guide is intended for use by Cochlear implant
recipients using the following systems:
CP900 SERiES AND KANSO
CP900 Series and Kanso Sound Processors
Remote Control
(CR210)
Remote Assistant
(CR230)

3TRUE WIRELESS ACCESSORIES USER GUIDE
NUCLEUS 7 AND KANSO 2
Nucleus 7 and Kanso 2 Sound Processors
Remote Control (CR310) Nucleus Smart App
Use this guide along with the user guides for your sound
processor, remote or the app.
Also refer to the user guide that was packaged with your
wireless accessory.
This guide describes how to set up and use your Cochlear
True Wireless Accessories. Before doing this, we
recommend you read Wireless accessories on page 4to
help you understand what each accessory does and the
two main steps that get you up and running.

4TRUE WIRELESS ACCESSORIES USER GUIDE
Wireless accessories
The Cochlear True Wireless Accessories enhance the
performance of your Cochlear system by wirelessly
transmitting sound from audio sources to your sound
processor.
NOTE
See pages 43 and 44 for Cautions and Warnings relating
to use of your wireless accessory.
The Cochlear Wireless Mini
Microphones provide simple
and discreet one-to-one
hearing or versatile
functionality for noisy or
challenging listening
situations.
The Cochlear Wireless TV
Streamer transmits sound
directly from your TV, sound
system or computer.
The Cochlear Wireless Phone
Clip wirelessly connects to
Bluetooth®devices, for
example, mobile phones,
music players and navigation
systems.

5TRUE WIRELESS ACCESSORIES USER GUIDE
Getting started
Using your wireless accessory for the first time is a
two-step process—pair, stream:
Step 1: Pair
Pair your wireless accessory with your sound processor(s)
so they can communicate (you only need to do this the
first time).
Step 2: Stream
Streaming lets you transmit audio from your wireless
accessory to your sound processor.

6TRUE WIRELESS ACCESSORIES USER GUIDE
Mini Microphone 2 & Mini Microphone 2+
The Cochlear Wireless Mini Microphone 2 and Mini
Microphone 2+ (from now on referred to as your Mini
Microphone) allow you to stream audio directly to your
sound processor. The Mini Microphone 2+ also provides
additional functionality.
Operating characteristics
CHARACTERiSTiC VALUE/RANGE MiNi MiCROPHONE
2 2+
One-to-one
communication
Operating range
up to 25 m
 
Talk time before
recharge required
Approx 10 hours  
Reconnect time
window if
connection lost
5 minutes  
Volume lock  
Mute function  
Built-in drop
detection feature
From heights
> 75 cm. Mutes
output for up to
2 seconds
 
Multi-use
functionality
Table mic, Line-in,
Induction-loop and
FM signals


7TRUE WIRELESS ACCESSORIES USER GUIDE
Line input (2+) FM connector (2+)
Status indicator (LED)
ON/OFF button
Mute button
Micro-USB
connector for
charging (2+)
Clip
Volume down
control
Volume up
control
Micro-USB connector
for charging (2)
Mute indicator
LED

8TRUE WIRELESS ACCESSORIES USER GUIDE
Preparing for use
Charge your Mini Microphone
When using for the first time, allow your Mini Microphone
to charge for at least 3 hours, even if the light indicates a
full charge.
To charge your Mini Microphone:
1. Plug the micro-USB charging cable into the Mini
Microphone.
2. Plug the other end into a power outlet using the
supplied adaptor.
3. While charging, the LED indicator lights red.
4. When fully charged (and still connected to the
charger), the LED lights red with green flashes every 2
seconds.
If battery level is low the Status indicator LED blinks yellow
once every second.
Mini Microphone 2 charging Mini Microphone 2+ charging
NOTE
Remember to turn off your Mini Microphone when not in use,
and keep it charged. Battery life (talk time) is 10 hours.

9TRUE WIRELESS ACCESSORIES USER GUIDE
Power ON/OFF your Mini Microphone
To power ON your Mini Microphone:
1. Press and hold the ON/OFF button for 2 seconds until
the LED turns green.
2. Release the ON/OFF button. The LED blinks green
every 2 seconds.
ON/OFF button
Status indicator (LED)
To power OFF your Mini Microphone:
1. Stop streaming before you turn off the Mini
Microphone.
2. Press and hold the ON/OFF button until the LED turns
red.

10 TRUE WIRELESS ACCESSORIES USER GUIDE
Step 1: Pair your Mini Microphone
You first need to pair your Mini Microphone with your
sound processor(s), so they can communicate.
NOTE
If you want to pair more than one wireless accessory to your
sound processor, you need to use separate ‘channels’. See
Using multiple accessories on page 38 for an explanation.
To pair your Mini Microphone:
1. Remove your sound processor(s).
2. Turn OFF your sound processor(s).
3. Turn ON your Mini Microphone by pressing and
holding the ON/OFF button on your Mini Microphone
for 2 seconds until the LED turns green.
4. Use a pen to press the pairing button once. The LED on
top of the Mini Microphone blinks yellow once every
2 seconds for 20 seconds. You must turn on your
processor(s) during this 20 second window to pair it
with the Mini Microphone.
Pairing
button
Mini Microphone 2 Mini Microphone 2+

11TRUE WIRELESS ACCESSORIES USER GUIDE
5. Turn ON your sound processor(s). It briefly flashes a
blue indicator light to tell you pairing has been
successful.
6. You can now replace your sound processor(s).
NOTE
After pairing, if you are not wearing your sound processor, the
blue flashing light will change to orange.

12 TRUE WIRELESS ACCESSORIES USER GUIDE
Step 2: Stream audio from your Mini Microphone
To hear sound from your Mini Microphone you need to
stream audio.
There are 4 ways you can do this:
USE YOUR... CP900
SERiES KANSO NUCLEUS
7
KANSO
2
1 Sound processor button    -
2Remote Control    
3Remote Assistant   - -
4Nucleus Smart App - -  
Once streaming has been activated, audible beeps or a
flashing light (depending on your sound processor) are
followed by streamed audio.
When stopping streaming, you hear a short beep. Your
sound processor returns to the last program used.
Option 1: Use your sound processor(s)
1. Turn ON your sound processor(s).
2. Turn ON your Mini Microphone.
3. Press and hold the button on your sound processor for
2 seconds, then release. Your sound processor flashes
a blue light to indicate streaming.
NOTE
For processors with two buttons, use the top button.
4. To stop streaming, tap the button on your sound
processor.

13TRUE WIRELESS ACCESSORIES USER GUIDE
Option 2: Use your Remote Control
1. Turn ON your sound processor(s).
2. Turn ON your Remote Control.
3. Turn ON your Mini Microphone.
4. Press and hold the Telecoil button for 2 seconds, then
release.
Telecoil
button Telecoil button
5. To stop streaming, tap the Telecoil button.
NOTE
Screen features may differ between products. See the user
guide that came with your device for product-specific details.

14 TRUE WIRELESS ACCESSORIES USER GUIDE
Option 3: Use your Remote Assistant
1. Turn ON your sound processor(s).
2. Turn ON your Remote Assistant. The Home screen
displays.
3. Turn ON your Mini Microphone.
4. You can start streaming with your Remote Assistant in
two ways:
• Method 1: Press and hold the Telecoil button for
2 seconds, then release.
Telecoil
button
Your Mini Microphone
displays as an icon on the
Home screen:
• Method 2: From the Home screen, press the right
arrow button until you see the Stream selector
screen. Scroll down the list to the channel you want
to use and press OK.

15TRUE WIRELESS ACCESSORIES USER GUIDE
5. To stop streaming, either:
• Tap the Telecoil button, or
• Select OFF on the
Stream selector
screen then press OK.
Option 4: Use the Nucleus Smart App
1. Turn ON your sound processor(s).
2. Turn ON your Mini Microphone.
3. Start the app.
4. Tap Audio Sources and tap the Mini Mic icon.
Your sound processor flashes a blue light to
indicate streaming.
The Mini Mic streaming icon displays on the app.
Audio Sources
Mini Mic icon
Off
Streaming
icon
5. To stop streaming, tap Off or Xon the app screen.

16 TRUE WIRELESS ACCESSORIES USER GUIDE
Using your Mini Microphone
One-to-one communication
A speaker can wear the Mini Microphone by clipping it to
their clothing in a vertical position within 10-40 cm of
their mouth. Your Mini Microphone provides direct
one-to-one communication with minimal background
noise.
NOTE
Make sure the ON/OFF button on top of the Mini Microphone
is pointing towards the speaker’s mouth when worn this way.
Use as a table microphone (2+ only)
When placed horizontally on a table, your Mini
Microphone 2+ automatically switches from directional
mode (for one-to-one communication) to omnidirectional
mode to pick up the voices of multiple speakers.
Test your Mini Microphone
Tap on or blow into the Mini Microphone to test that it is
streaming. If you don’t hear anything at first, you may
need to turn up the volume on your Mini Microphone.

17TRUE WIRELESS ACCESSORIES USER GUIDE
Volume control
Volume up control
Volume down control
Mute button Mute indicator LED
Adjust the volume
To change the volume, use the volume controls on the side
of your Mini Microphone.
Mute the volume
The audio from the Mini Microphone can be muted, for
example if the speaker needs to have a separate
conversation that is not relevant to the user.
To mute the signal, press the Mute button (located
between the volume controls) once. The Mute LED flashes
yellow. To unmute, press again. The Mute LED stops
flashing.

18 TRUE WIRELESS ACCESSORIES USER GUIDE
Lock the volume
The volume can be locked to a specific level. When locked,
the volume remains fixed at the level that was set when
the Mini Microphone was last turned off.
To lock the volume:
1. While streaming from your Mini Microphone, adjust
the volume to your desired level.
2. Turn OFF your Mini Microphone.
3. Press and hold the volume ‘-’ button together with
the ON/OFF button.
4. When the Status indicator LED turns green, keep
holding the volume ‘-’ button and release the ON/
OFF button.
5. Continue holding the volume ‘-’ button (for about
10 seconds), until the Status indicator LED displays a
green-yellow-red sequence.
Your volume level is now locked and will remain at this
level even after switching the Mini Microphone off and on.
The Status indicator LED gives two quick flashes every two
seconds.
NOTE
You can still Mute audio while the volume is locked.