Cocoon DY180369 User manual

Before you begin, make sure you have:
1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)
2. Batteries installed and charged via USB charging cable
Note: It will take approximately 10 hours for batteries to fully charge
3. A Wi-Fi connection (have the password handy)
4. Download the Cocoon Connect app
For detailed instructions and videos, visit www.cocoonproducts.com.au
Ensure that LED indicator light around the Smart Doorbell button is
flashing Red for pairing mode. Refer instruction manual if it is not
Scan this code
or search for
Cocoon Connect
First time users:
Register an account and follow the remaining prompts on screen
2. SELECT SMART
CAMERA (IN
SECURITY & SENSOR)
1. ADD NEW
DEVICE
3. Confirm pairing mode 4. Add the DOORBELL
1. BEFORE YOU START 2. App Setup
INDICATOR
LIGHT

1. Hold the mobile phone 15 to 20cm in front of the Doorbell for
the camera to scan the QR code.
2. The Smart Video Doorbell will beep when the code is scanned
3. Press ‘Heard the Beep’ Use, manage and control your Smart Video Doorbell from the Cocoon
Connect app
LED will flash BLUE initially and then turn off until pressed
If you have any issues with this step, ensure your password is correct
If you are still having issues, please check your Instruction Manual
5. Connect Doorbell to Wifi 6. Scan QR Code with Camera 7. Doorbell added
successfully 8. control your Doorbell