COLBOR PL8-R User manual

Pocket Fill Light
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Caring For Your COLBOR Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Please remove the USB charging cable when the battery is fully charged.
The product might get hot during use, which is normal. Please allow certain
space for heat-sink when using it.
If you do not use the product for a long time, it might not be able to turn on
instantly due to dead battery. Please charge the product and it can resume to
work. Please charge the product every 3 months regularly.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Operation Instructions
① Power & Mode Switch Button
Long press for 3 seconds to turn on/o the product.
When the product is on, short press to switch among 3 light modes, CCT, HSI
and EFF mode.
② Display Screen
③ Dial
Short press down to choose the option to be adjusted.
Roll upwards to increase value, and downwards to decrease value.
④ Brightness Control ⑤ Type-C Charging Port
⑥ 1/4” Screw Hole ⑦ Cold Shoe
⑧ Phone Clamp
17 2
3
6
4
5
8
Interface Introduction
Color Temperature Control (2700-9000K): Roll the Dial upwards or downwards
Brightness Control (0%~100%): Roll the Brightness Control upwards or
downwards
In CCT mode, press the Mode Switch Button once to enter HSI mode.
CCT Mode
HSI Mode
Color Temperature
Brightness
Saturation
Battery Life
Hue
Brightness
0° 360°60° 120° 180° 240° 300°
Wireless Signal
In HSI mode, press the Mode Switch Button once to enter EFF mode. Switch
the special eect via short press the Dial in EFF mode.
Special Eect:
Fire--Fireworks--TV--Faulty Bulb--Strobe--Lightning--Pulsing--Party--
Cop Car
Brightness Control (0%~100%): Roll the Brightness Control upwards or
downwards.
Frequency Control: Roll the Dial upwards or downwards
EFF Mode
Frequency
Brightness
Special Eect
Specications
Color Rendering Index
Color Temperature Range
Number of bead
Power
Battery Capacity
Runtime
Charging Port
Working Voltage
Input Voltage
Ra ＞ 95
2700-9000K
105
8W
3000mAh
100% brightness for about 83 minutes
Type-C
3.7V
5V/1A
1.Short press down the Dial to choose the option to be adjusted, hue or
saturation
2.Roll the Dial upwards to increase the value, and downwards to decrease the
value
3.Brightness Control (0%~100%): Roll the Brightness Control upwards or
downwards

WARRANTY CERTIFICATE
User Information
Sales Information
Repair Record
Result
Please register your warranty.
Meanwhile, you are welcomed to contact us via Email.
Customer Name:
Phone Number:
Email:
Address:
Service Date:
Technician:
Issue:
Sales Date:
Model:
Product Code:
Dealer:
Solved Unsolved Returned(Replaced)
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
[email protected]
www.colborlight.com
Guangzhou Zhiying Technology Co., Ltd
WARRANTY
Warranty Period
Thank you for purchasing COLBOR products.
1.Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2.Original COLBOR products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to material
defection or technological problem, the defective product or defective part will
be repaired or replaced without charge (service and materials fee).
Warranty Exclusions and Limitations
1.Faults resulted from inappropriate use of a product without following its
operation specication
2.Articial damage, e.g. crash, squeeze, scratch, or soaking
3.Modications to a product by its user or a third party without prior written
consent of COLBOR, e.g. replacement of element or circuit, label alteration
4.The code on product is inconsistent with that of warranty certicate, or the
code on the product or warranty certicate is altered or torn o
5.All consumable accessory attached to a product, like cable, wind mu, battery
6.Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
1.If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact COLBOR’s
customer service through email.
2.Please retain your sales receipt and warranty certicate as proof of
purchase.If any of these documents is missing, only sales return or chargeable
service will be provided.
3.If the COLBOR product is out of the warranty coverage, the service and the
parts cost will be charged.
Package List
PL8-R
Video Light *1
Light Diuser *1
Type-C Charging
Cable *1
Packing
bag *1
1/4 Extended
Connector *1
Cold Shoe
Mount *1
Power Requirement
Body Material
Dimension
Weight
Built-in Lithium Battery /DC Power Supply
ABS & Metal
125x75x17mm
183g