ColorKey PartyBar GO User manual

PartyBar GO
CKU-3020
USER MANUAL

2
Introduction
Thank you for purchasing the ColorKey PartyBar GO. Please read these instructions
carefully before use. O
perating this fixture according to these instructions is important to
avoid any possible damage or
accidents caused by misuse.
 Packing list
 1x PartyBar GO
 1x IR Remote
 1x 6’ Lighting Stand
 1x Carrying Bag
 1x Power Cord
 User Manual

3

4
Display Operation
 MENU: Access the menu/Scroll through menu options
 UP: Scroll up through menu selections or increase parameters
 DOWN: Scroll down through menu selections or dec parameters
 ENTER: Open/Select the current menu option

5
DMX Connections & Settings

6

7
Menu Guide

8
IR Remote

9
DMX Values

10
Operating Modes

11
Troubleshooting
Problem Solutions
No DMX control
 Make sure that the DMX cable is properly connected
 Make sure that the DMX controller is operational
 Check the DMX cable for tears or breaks
 Make sure that the fixture is in DMX mode
Fixture does not
respond to sound
 Make sure that the fixture is in Sound Active mode.

12
Technical Information
Power supply: AC100-240V;50-60Hz
Light source: 2 pars each containing 3x3w RGB+21pc White LED; 2 DerbyFx each
containing 4x3W LED RGBW
Power consumption: 110W
Control: IR Remote, DMX512 control, Auto Run,
Master /Slave, Sound Active
Channel: 3/6/15 channels
Working temperature: up to 40˚C
IP rate: IP20
Lamp rated life: >50000 Hours
Beam angle: 25 degree
Dimming: 0-100%
Features: IR remote control
Battery: 12.6v 8400MA
Battery Working time: (+/-) 6 hours Full color,
Fuse: F3A 250V
Product size: 200 x 750 x 165 mm
Net Weight: 5.7 kgs
Notice to consumer: ColorKey offers a 2-year limited warranty. Please visit our website at
www.ColorKeyLED.com to register your product.
Please note: As we continue to work towards improving our products and your experience
as a user, we recommend that you check our website periodically for updates to user manuals
and specifications at www.ColorKeyLED.com or you may contact us directly at
[email protected].

13

PARTYBAR SETUP INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USING THE STAND TO AVOID
DAMAGE AND INJURY
A
B
C
The PartyBar tripod stand includes a removable extension pole, which has
the advantage of shrinking the footprint of the stand when disassembled,
for ease of transportation. With the extension pole installed, the stand can
lift your xtures over 7ft in the air.
WARNING! In order to avoid accidents, it is highly recommended to
weigh down the base of the tripod using counterweights or
sandbags while the stand is set to maximum height. Failure to do
so may result in the stand being tipped over accidentally, causing
damage and bodily injury.
To use the extension pole, simply
press the connection collar (B) to
the top of the tripod (A), then insert
the extension (C) into the collar.
Push down until both poles are fully
inserted into the collar and tighten
the knob.