ColorKey Mover Halo Beam QUAD 4 User manual

Mover Miniwash QUAD 4
CKU01-5033
USER MANUAL

1
Introduction
Thank you for purchasing the ColorKey Mover Miniwash QUAD 4. Please read these
instructions carefully before use. O perating this fixture according to these instructions is
important to avoid any possible damage or accidents caused by misuse.
Packing list
n 1x Mover Miniwash QUAD 4 moving head fixture
n 1x Bracket
n 1x Power cord
n User Manual
Safety
Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when
moving or setting up the fixture.
Caution! Avoid direct eye exposure with the fixture when on.
• This fixture is for indoor use only.
• This fixture must be installed a minimum distance of 5 meters (16’4”) away from any
lighted objects.
• Do not install or operate this fixture near flammable materials.
• This device must be installed, operated, and maintained by a qualified professional.
• Do not touch the fixture with bare hands during operation as the surface temperature of
the fixture can exceed 60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to
cool before attempting to touch it.
• Please check if the voltage is in accordance with the rated power before installing.
• Do not operate this fixture if the power cord has been damaged. Turn off fixture and
replace with a power cord of similar rating.

2
Display Operation
Ø MENU: Access the menu/Scroll through menu options
Ø ENTER: Open/Select the current menu option
Ø UP: Scroll through menu selection or parameter increase
Ø DOWN: Scroll through menu selection or parameters decrease

3
Menu Guide
Addr
A001-A51
2
DMX 512
CHnd
16CH
16 channel
18CH
18 channel
SLnd
Auto
Master Auto Mode
Soun
Master Sound Mode
SL 1
Console control
SL 2
Slave Mode
SHnd
SH 0
Effect 0 (recommended)
SH 1
Effect 1
SH 2
Effect 2
SH 3
Effect 3
SEnS
0-99
Sound sensitivity adjustment
BLnd
BLAc
No DMX signal (0)
Auto
No DMX signal(Auto)
Soun
No DMX signal(Sound active)
Hold
No DMX signal (hold up to the latest Console Control
situation)
LEd
OFF
LED display OFF (5 seconds later)
ON
LED display ON (always)
dISP
no
Backward display (LED display)
YES
Forward display(LED display)
rPAN
no
X-axis(motor) forward running (PAN)
YES
X-axis(motor) backward running (PAN)
rTiL
no
Y-axis(motor) forward running (TILT)
YES
Y-axis(motor) backward running (TILT)
REST
YES
Reset

4
DMX Values
16 Channel mode
Ch
Function
Value
1
PAN running
0-255
2
TILT running
0-255
3
Speed adjustment
0-255
4
Dimmer
0-255
5
Strobe (from slow
speed to fast
speed)
0-255
6
Red dimming
0-255
7
Green dimming
0-255
8
Blue dimming
0-255
9
White dimming
0-255
10
Orange dimming
0-255
11
UV dimming
0-255
12
Motor
0-15 (no function)
16-128 (fast speed Auto running &
“sound active function” off)
129-255 (slow speed Auto running &
“sound active function” on)
13
Sensitivity
adjustment (Sound
active)
0-255
14
Colors
0-140 (change colors)
141-255 (sound acitive with changing
colors)
15
colors changing
speed adjustment
0-255
16
No function
0-249
Reset
250-255