ColorKey Mover Mini Superbeam QUAD 4 User manual

Mover Mini
Superbeam QUAD 4
CKU01-5034
USER MANUAL

1
Introduction
Thank you for purchasing the ColorKey Mover Mini Superbeam QUAD 4. Please read these
instructions carefully before use. O perating this fixture according to these instructions is
important to avoid any possible damage or accidents caused by misuse.
Packing list
n 1x Mover Mini Superbeam QUAD 4 moving head fixture
n 1x Bracket
n 1x Power cord
n User Manual
Safety
Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when
moving or setting up the fixture.
Caution! Avoid direct eye exposure with the fixture when on.
• This fixture is for indoor use only.
• This fixture must be installed a minimum distance of 5 meters (16’4”) away from any
lighted objects.
• Do not install or operate this fixture near flammable materials.
• This device must be installed, operated, and maintained by a qualified professional.
• Do not touch the fixture with bare hands during operation as the surface temperature of
the fixture can exceed 60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to
cool before attempting to touch it.
• Please check if the voltage is in accordance with the rated power before installing.
• Do not operate this fixture if the power cord has been damaged. Turn off fixture and
replace with a power cord of similar rating.

2
Display Operation
Ø MENU: Access the menu/Scroll through menu options
Ø ENTER: Open/Select the current menu option
Ø UP: Scroll through menu selection or parameter increase
Ø DOWN: Scroll through menu selection or parameters decrease

3
Menu Guide
Addr
A001-A512
DMX 512 address
CHnd
10CH
10 channel setting
17CH
17 channel setting
SLnd
MAST
Master mode
SLAV
Console control
SHnd
Soud
Sound active
Auto
Speed (sp0-sp9), Auto selection
SEnS
0-100
Sensitivity adjustment (Sound active)
bLnd
YES
Standby Mode (ON)
no
Standby Mode (OFF)
LEd
OFF
LED display OFF (5 seconds later)
ON
LED display ON (always)
dISP
no
Backward display(LED display)
YES
Forward display(LED display)
PAN
YES
X-axis(motor) forward running
no
X-axis(motor) backward running
TILT
YES
Y-axis(motor) forward running
no
Y-axis(motor) backward running
MANU
PAN
X-axis(motor) manual test
TILT
Y-axis(motor) manual test
FOCU
RED
Red color (manual test)
GREEN
Green color (manual test)
BLUE
Blue color (manual test)
WHITE
White color (manual test)
DIMMER
Master dimming (manual test)
STROBE
Strobe (manual test)
TEST
Auto test
VER
V104
Software version
RSET
YES
Reset

4
DMX Values
10 Channel mode
Ch
Value
Function
1
0-255
PAN running (0° - 540°)
2
0-255
TILT running (0° - 220°)
3
0-255
Motor speed (PAN / TILT), from fast to
slow
4
0-127
Rotation motor: 360°running route locate
128-191
Forward infinite rotation (from fast to slow)
192-255
Forward infinite rotation (from slow to fast)
5
0-255
Master dimmer
6
0-255
Red dimming
7
0-255
Green dimming
8
0-255
Blue dimming
9
0-255
White dimming
10
0-15
Strobe
16-255
Strobe (from slow to fast)

5
17 Channel mode
Ch
Value
Function
1
0-255
PAN running (0° - 540°)
2
0-255
Hint adjustment (PAN)
3
0-255
TILT running (0° - 220°)
4
0-255
Hint adjustment (TILT)
5
0-255
Motor speed (PAN / TILT), from fast to slow
6
0-127
Rotation motor: 360°running route locate
128-191
Forward infinite rotation (from fast to slow)
192-255
Forward infinite rotation (from slow to fast)
7
0-255
Master dimmer
8
0-255
Red dimming
9
0-255
Green dimming
10
0-255
Blue dimming
11
0-255
White dimming
12
0-15
Strobe
16-255
Strobe (from slow to fast)
13
0-7
No function
8-127
15 static colors
128-191
Jump change color
192-255
Glow change color
14
0-255
Color auto (slow to fast)
15
0-15
Motor effect (PAN/TILT): No function
16-35
Effect 1
36-55
Effect 2
56-75
Effect 3
76-95
Effect 4
96-115
Effect 5
116-135
Effect 6
136-155
Effect 7
156-175
Effect 8
176-195
Effect 9
196-215
Effect 10
216-235
Effect 11
236-255
Effect 12
16
0-255
Motor speed (PAN/TILT): from fast to slow
17
150-200
Reset

6
DMX Connections
Ø DMX Cable
：
The Mover Mini Superbeam QUAD 4 can be controlled via DMX using a 3-pin XLR
connection. The standard DMX connection is XLR is: one end connects to the male plug,
and the other connects to the female. As below: pin 1: ground, pin 2: negative signal, pin 3:
positive signal
Noted：In order to avoid failures and interference signal transmission，we connect a
resistance120Ω （1/4W ）at the end of the DMX connecting as below:
Ø The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable

7
Master/Slave Mode Operation
Master/Slave
Master/Slave mode allows you to connect multiple units together using one (1) unit to control
others in a chain. When a fixture is set to ‘Master Mode,’ this unit will always act as a
controlling unit until it is switched out of ‘Master Mode’. The Master unit will send out signal
via DMX to Slave units which will react in synchronization. When a fixture is set into ‘Slave
Mode’, this fixture will receive the Master signal. To avoid master signal and DMX signal
interference, do not connect DMX when using Master/Slave mode. If using a DMX run
longer than 60 meters and/or over 32 units, a signal amplifier may be required.
Troubleshooting
Problem
Solutions
No DMX control
u Make sure that the DMX cable is properly connected
u Make sure that the DMX controller is operational
u Check the DMX cable for tears or breaks
u Make sure that the fixture is in DMX mode
Fixture does not
respond to sound
u Make sure that the fixture is in Sound Active mode.

8
Technical Information
Power supply: AC110V-240V; 50-60HZ
Power consumption: 60W
Light source: 4 x 10W 4-in-1 LED’s (RGBW)
Life span: up to100,000 hours
Channel: 10ch/17ch
Control: Auto, Sound active, DMX512, Master/slave
Pulse frequency: 0-10HZ
Dimming: 0-100%
Pan: 540˚
Tilt: 220˚
IP rate: IP20
Notice to consumer: ColorKey offers a 1-year limited warranty. Please visit our website at
www.ColorKeyLED.com to register your product.
Please note: As we continue to work towards improving our products and your experience
as a user, we recommend that you check our website periodically for updates to user
manuals and specifications at www.ColorKeyLED.com or you may contact us directly at
[email protected].