comfortel DIAMOND 2 SEAT WASH LOUNGE User manual

#1201 DIAMOND 2 SEAT
diamond 2 seat
washlounge
comfortel.com.au
owners manual

GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
PLUMBING
1. This unit must be plumbed by a licensed plumber.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
DO NOT ALLOW CHILDREN AROUND
THE WASHLOUNGE WHEN IN USE
ALL PLUMBING MUST BE COMPLETED
BY A LICENSED PLUMBER
IMPORTANT
IMPORTANT
GET STARTED
DIAMOND 2 SEAT
Wash Lounge
Total Width: 1780mm
Internal Seat Width: 600mmx2
Length: 1240mm
Basin Height: 930mm
Water consumption: 5L p/m
A A
D D
DRAWN
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
ALL DESIGNS SHOWN ARE REGISTERED AND COPYRIGHTED TO COMFORTEL PTY LTD
ALL RIGHTS RESERVED. THESE DESIGNS ARE CONFIDENTIAL AND ARE NOT TO BE
USED OR SHOWN TO A THIRD PART WITHOUT EXPRESSED WRITTEN AUTHORIZATION
BY COMFORTEL. ALL DESIGNS REMAIN THE SOLE PROPERTY OF COMFORTEL AND
ANY UNAUTHORIZED USE OF THESE DESIGNS WILL BE CONSIDERED AN
INFRINGEMENT OF COPYRIGHT AND WILL BE PROSECUTED.
A A
D D
DRAWN
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
ALL DESIGNS SHOWN ARE REGISTERED AND COPYRIGHTED TO COMFORTEL PTY LTD
ALL RIGHTS RESERVED. THESE DESIGNS ARE CONFIDENTIAL AND ARE NOT TO BE
USED OR SHOWN TO A THIRD PART WITHOUT EXPRESSED WRITTEN AUTHORIZATION
BY COMFORTEL. ALL DESIGNS REMAIN THE SOLE PROPERTY OF COMFORTEL AND
ANY UNAUTHORIZED USE OF THESE DESIGNS WILL BE CONSIDERED AN
INFRINGEMENT OF COPYRIGHT AND WILL BE PROSECUTED.
A A
D D
DRAWN
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
ALL DESIGNS SHOWN ARE REGISTERED AND COPYRIGHTED TO COMFORTEL PTY LTD
ALL RIGHTS RESERVED. THESE DESIGNS ARE CONFIDENTIAL AND ARE NOT TO BE
USED OR SHOWN TO A THIRD PART WITHOUT EXPRESSED WRITTEN AUTHORIZATION
BY COMFORTEL. ALL DESIGNS REMAIN THE SOLE PROPERTY OF COMFORTEL AND
ANY UNAUTHORIZED USE OF THESE DESIGNS WILL BE CONSIDERED AN
INFRINGEMENT OF COPYRIGHT AND WILL BE PROSECUTED.
A A
D D
DRAWN
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
ALL DESIGNS SHOWN ARE REGISTERED AND COPYRIGHTED TO COMFORTEL PTY LTD
ALL RIGHTS RESERVED. THESE DESIGNS ARE CONFIDENTIAL AND ARE NOT TO BE
USED OR SHOWN TO A THIRD PART WITHOUT EXPRESSED WRITTEN AUTHORIZATION
BY COMFORTEL. ALL DESIGNS REMAIN THE SOLE PROPERTY OF COMFORTEL AND
ANY UNAUTHORIZED USE OF THESE DESIGNS WILL BE CONSIDERED AN
INFRINGEMENT OF COPYRIGHT AND WILL BE PROSECUTED.
A A
D D
DRAWN
ALL DIMENSIONS IN MILLIMETERS
DO NOT SCALE DRAWING
ALL DESIGNS SHOWN ARE REGISTERED AND COPYRIGHTED TO COMFORTEL PTY LTD
ALL RIGHTS RESERVED. THESE DESIGNS ARE CONFIDENTIAL AND ARE NOT TO BE
USED OR SHOWN TO A THIRD PART WITHOUT EXPRESSED WRITTEN AUTHORIZATION
BY COMFORTEL. ALL DESIGNS REMAIN THE SOLE PROPERTY OF COMFORTEL AND
ANY UNAUTHORIZED USE OF THESE DESIGNS WILL BE CONSIDERED AN
INFRINGEMENT OF COPYRIGHT AND WILL BE PROSECUTED.
WELS RATING

GET STARTED
SECURE AND BOLT DOWN
BEFORE INSTALLATION
THE WASHLOUNGE MUST BE SECURED TO THE FLOOR.
Making sure your wash lounge is supported from behind, remove the back
panel by unscrewing the two screws located on the left and right of the
access panel. Fix to the floor through connector brackets using bolts.

POSITIONING
DIAGRAM A
DIAGRAM B
PLUMBING ACCESS OPTIONS
Determine the best way to connect plumbing.
OPTION A: FROM WALL TO BASIN STAND
From behind the basin stand connect plumbing to the wall
OPTION B: FROM FLOOR TO BASIN STAND
From under the basin stand connect plumbing to the floor
OPTION C: FROM FLOOR BENEATH SEAT
From under the chair seat connect plumbing to the floor
ALL PLUMBING MUST BE COMPLETED
BY A LICENSED PLUMBER
IMPORTANT
If washing from behind, allow a minimum of 400mm of space behind your washlounge to provide room for access.
If washing from side add 400mm. All measurements in mm.
BEFORE INSTALLING YOU SHOULD CONSIDER
THE FOLLOWING
• Allow for the necessary room around the unit for
free movement.
• If installing against a wall, a minimum distance of 80mm
between wall and bottom back of basin is required to
allow free movement of basin.
• If plumbing location is in wall (see Diagram A).
For neatness of finish it is preferable to bring water
and waste into the washlounge in the same hole.
• If plumbing location is on floor (see Diagram A),
place washlounge over.
C
Wall
1240
A
80
310620
1320
B
1780
50 100
1780
50
3760
490 490800 490 490800

ASSEMBLY
DIAGRAM C
BASIN ASSEMBLY
124
3
6
5
7
8
9
14
17
18
10
11
12
13
16
15
1. Flick Mixer
2. Showerhead
3. Showerhose basin
collar
4. Comfortneck
5. O-ring
6. Foam washers
7. Plastic nut
8. Flat seal
9. Fitted flange
10. Flexible waste pipe
11. Flange
12. Seal
13. P trap (not supplied)
14. Hot and cold braided
hoses
15. Long nut
16. Plastic washers
17. Metal washers
18. O-ring
WASHLOUNGE ASSEMBLY
1. Washlounge MUST be secured to the floor.
BASIN ASSEMBLY
2. Install Flick Mixer using O-ring, plastic and metal
washers & (Long Nut) and Shower Head using the
Showerhose Basin Collar, O-ring, Foam Washer &
Plastic Nut as indicated.
3. Place Flick Mixer and Shower Head Hoses through the
holes in the basin.
4. Connect Flexible Waste Pipe to Plug and Waste which
is already installed making use of the with Flat Seal and
fitted Flange.
PLUMBING CONNECTION
5. Connect Flexible Waste Pipe to P trap (not supplied)
making use of Seal and Flange.
6. Connect hot and cold (½” connection) braided hoses
to respective supplies.
7. Please attach Comfortneck to the basin.

INSTALLATION & ASSEMBLY: BASIN
DIAGRAM D
INSTALLING BASIN
·Undo bolts and remove steel frame from the
opening of the back of chair.
·Flip steel frame over and re-bolt onto the inside of
the chair using bolts supplied.
·Secure and bolt on the stainless cover onto the
steel frame.
·Using 4 x bolts/nuts provided, install ceramic basin
onto steel frame and tighten.
·Check the basin is balanced. If not balanced,
adjust the bolts to ensure that the basin is balanced
correctly.
PLEASE MAKE SURE THERE IS
SUPPORT AT THE BACK OF THE WASH
LOUNGE WHERE THE WASH BASINS
ARE LOCATED, AS ONCE THE SEAT
CUSHION IS REMOVED  THE UNIT
COULD TILT BACKWARDS.
1. Opening at back of chair
2. Steel frame
3. Bolts (supplied)
4. Stainless steel cover
5. Ceramic basin
IMPORTANT
BASIN ASSEMBLY
3
1
2
2
1
4
4
2
1
5
3
1
2
2
1
4
4
2
1
5
3
1
2
2
1
4
4
2
1
5

CLEANING
UPHOLSTERY
· All upholstery needs some care; good housekeeping will help
to prolong the life of any upholstered products.
· Avoid extreme temperatures. Extreme cold can make your
vinyl prone to cracking, while extreme heat can cause
permanent stretching.
· Avoid exposing to direct sunlight for prolonged periods of time.
· Clean regularly (weekly) to remove body oils which cause
hardening or damage
· To clean use a sponge which has been moistened in warm
soapy water
· After cleaning with a sponge, dry with a soft, clean cloth
· Stubborn grime may require gentle scrubbing with a soft brush
Do not use:
·acetone ·furniture polishes
·bleach ·detergent
·abrasive cleaners ·steel wool
METAL AREAS
Wipe using regular cleaning products that are recommended
for stainless steel and metals.
Do not use:
·acetone ·furniture polishes
·bleach ·detergent
·abrasive cleaners ·steel wool
Damage caused by any improper treatment is not covered
by the product warranty.
A periodic inspection of all components and fasteners should be made to ensure that your washlounge is structurally
intact and functioning properly.
Damaged and broken parts should be replaced and loose fasteners tightened.
All maintenance to be carried out by a suitably qualified tradesperson.
MAINTENANCE
HOW TO CHANGE A SHOWERHEAD
Please view our online video on how to change a showerhead:
http://www.youtube.com/watch?v=3stWF7882EA
ALWAYS FOLLOW THE CLEANING INSTRUCTIONS

The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
#1201 DIAMOND 2 SEAT WASHLOUNGE
WELS RATING
Revision Date: 14.06.2018
©Comfortel Furniture 1997-2018. All rights are reserved.
No part of this document may be photocopied,
reproduced or translated to another language without
written consent of Comfortel Furniture Pty Ltd.
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS & LABOR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY All Linak electric actuators
5 YEARS PARTS ONLY Taps cartridge, Ceramic basins
TERMS AND CONDITIONS
For more information about our terms and conditions including warranty, please refer to our website.
WARRANTY PERIOD