Comica RGB Umic User manual

RGB Umic
RGB Cardioid Condenser USB Microphone

01
Thanks for purchasing RGB Umic
Foreword
Main Features
. 16mm Cardioid Condenser Mic for Professional Studio
Quality
. 48kHz/24bit Audio Recording, Intelligent Denoise
. USB-C Digital Output Port, Plug and Play
. Dynamic Radiant RGB Light with 7 Unique RGB Eects
. Built-in Sound Card with 3-level Reverb Modes
. Support Two-way Monitoring, Muting and Gain Control
. Built-in Lithium Battery, Support Using While Charging
. Designed with 1/4 Threaded Hole, Flexible Extension
. Detachable Desktop Stand, Unique Wood Grain Design

02
Notice
When used with iPhone, the iPhone’s power supply can’t
handle the RGB light, so it’s necessary to charge the RGB
Umic in advance to ensure the normal operation of the RGB
light
The RGB light is turned on by default in the USB audio output
mode
Please purchase the corresponding USB-Lightning adapter
cable/adapter by yourself when using with Lightning devices
Please aim the front of the microphone at the sound source to
get an excellent recording
Do not use the equipment in the vicinity of heat source or
interference source, such as radiator, oven, refrigerator or air
conditioner
The product belongs to high-precision instruments, please
avoid falling, collision or pounding
Do not use the equipment in rain or in the damp environment
to avoid short-circuit danger
Tips
When used in computer, please follow the steps below:
①Connect RGB Umic to the computer
②Click sound setting and set the "Comica_RGB Umic" as the
input and output device
Sound
Output
Choose your output device
Comica_RGB Umic
Input
Choose your input device
Comica_RGB Umic

03
Packing List
Main Part:
Accessories:
Warranty CardUser Manual
RGB Umic
2 in 1 Audio Cable
RGB Umic
RGB心型电容USB麦克风

04
Components and Instruction
Microphone
RGB Light Eect Screen
Muting Button
RGB Light Battery/Reverb
Level Indicator
Microphone Working Status Indicator
USB-C Charging Port
TRS/TRRS Monitoring Port
USB-C Audio Output Port
Gain/Volume Control Knob
Reverb Level Switch
RGB Light Power/ Eect Switch
1/4 Thread Hole
Desktop Stand

05
Instruction
1. Microphone
Please aim the front ‘C’ logo of the microphone at the sound
source to get an excellent recording.
2. RGB Light Eect Screen
Show seven RGB light eects and charging status, the red light
shows on the full screen when complete charge.
3. Microphone Working Status Indicator
Blue light keeps on when in normal recording; Red light keeps on
when in muting mode.
4. Muting Button
Short press to switch normal recording/muting.
5. RGB Light Battery/Reverb Level Indicator
Red light flickers when in low battery; Purple light keeps on when
in original sound mode; Blue light keeps on when in low-level
reverb mode; Orange light keeps on when in mid-level reverb
mode; Green light keeps on when in high-level reverb mode.

06
6. USB-C Charging Port
Connect with power bank/external power for charging.
7. TRS/TRRS Monitoring Port
Plug in 3.5mm TRS/TRRS headphones for real-time monitoring.
8. USB-C Audio Output Port
Connect computer/smartphone via 2 in 1 audio cable.
9. Gain/Volume Control Knob
Turn clockwise to increase mic gain and headphone monitor
volume; Turn counterclockwise to decrease mic gain and
headphone monitor volume.
10. Reverb Level Switch
Short press 'Eect' to switch normal recording/low-level
reverb/mid-level reverb/high-level reverb recording.
11. RGB Light Power/ Eect Switch
Long press ‘Mode’ to turn on/o; Short press 'Mode' to switch 7
kinds of light eects.

07
Installation and Usage
Installation
Work with the Desktop Stand
Put the microphone into the desktop stand; Adjust the angle of
the microphone to meet your needs.

08
Work with the Microphone Arm Stand
Connect the microphone and the microphone arm stand through
the 1/4 threaded hole of the microphone; Adjust the angle of the
microphone to meet your needs.
You can adjust RGB Umic’s capsule in all directions to fit your dierent
pickup angles.