Comica SIG.LAV V05 MI User manual

User Manual
SIG.LAV V05 MI
Multi-functional Single Lavalier Microphone
(For Iphone with Lightning Interface, MFI Certified)

Foreword
Thanks for purchasing Comica SIG.LAV V05 MI multi-function
single lavalier microphone .
This product can be equipped with Smartphone(with Lightning
Interface) for audio recording. It is designed with functions of
supporting adjustable sensitivity, low-cut switch, real-time
monitoring, work indicator light, CR2032 3V battery power supply,
flexible back clip, which can bring you better experience and
sound quality effect and without any concern!
Please carefully read this instruction manual before use. The
product has been precisely calibrated at the factory, and please
do not assemble and disassemble the parts by yourself, or the
warranty will be invalid!
Notice
This product is compatible with iOS 10.2 or above
Please set your Iphone to fly mode to avoid any interference during
work.
Please stay away from heat source or interference source when
using.
Please avoid falling, collision or impact when using.
Please do not use in rain or humidity, or there will be a risk of shot
circuit.
1

Main Functions
. Design for Iphone with Lightning Interface
. Low-cut Filter Function
. Stepless Gain Control
. Real-time Monitor
. Super-shield and Low Noise Mic
. LED Working Indicator
Package List
Body of Microphone Back Clip
Carrying Case Instruction Warranty Card
User Manual
SIG.LAV V05 MI
Multi-functional Single Lavalier Microphone
(For Iphone with Lightning Interface, MFI Certified)
2
Low-cut Filter
Function
Stepless Gain
Adjustment
Design for Iphone
with Lightning Interface
Real-time
Audio Monitor
Super-shield
and Low Noise Mic
Working Indicator

Components
Microphone
Lightning Interface Audio Output Cable
Monitoring Jack
Work Indicator Light
Mic
Gain Control Wheel
Power / Record / Low Cut Function Switch
Back Clip
Battery Holder
1
2
3
4
5
6
7
8
1
3
7
8
2
6
5
4
3

Installation and Use
1. Switch to Record / Low Cut Function, the indicator light turns green
Switch to Record/Low Cut Function Switch
the indicator light turns green
4

2. Insert the Lightning Interface output connector into the Lightning
Interface input interface of Iphone and use with the recording
system for recording
5

Function Description
1. Gain Control Wheel
During the usage, the gain control wheel can adjust the output
sensitivity of microphone
2. 3.5mm monitoring jack
You can monitor the recording situation through the 3.5mm
monitoring jack
3. Power /Low Cut Switch
You can Power off or Power on the device in two working modes:
Normal Recording Mode and Low-cut Function mode.
Switch Between Off、Normal Recording、and Low-cut Function modes
Gain Control Wheel
6

dB re 1 V/Pa
20
10
0
-10
-20
-30
20Hz 100 1000 10 000 20 000
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0 -25.0
dB rel. 1V/Pa
+5.0
Frequency:
500 Hz :
1000 Hz :
4000 Hz :
Polar Pattern
Frequency Response
Specification
7

Product Features
Polar Pattern
Sensitivity
Gain Range
Frequency Response
S/N
Max SPL
Battery
Working Temperature
Storage Temperature
Omni-directional
-35dB ±2dB
Maximum increase +10dB
60Hz - 18kHz
>65dB
100dB
CR2032 3V
0℃~ +50℃
-20℃~ +60℃
8

Email: [email protected]