Commax DRC-41UN User manual

Door camera DRC-41UN
User Manual
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.

2. Installation & Wiring
Camera Lens
LED &
Speaker
Name card
Call button
Microphone
Angle
Volume
Door
Monitor
illumination Sensor
Adjuster
Controller VR Release cable
Connecting
Terminal
66.5°
FHM 4X40
(4EA)
①Line up the holes of wall and
②Do the monitor wiring cosidering
flush box and fix it on the wall.
the polarity according to the image
(Wiring diagram)
③Fit the product from the above and
Then, check the monitor screen,
press it against the bracket.
if it shows the place that you would
like to see.
▶Position of camera
Installation
▶
Wiring
▶
④Fix it from the bottom with the screw
1. O er iew

4. Specification
Model
Power source 12V (from Monitor)
Wiring
Camera Module
Communication
Frequency PAL STANDARD
Min. Lux.
Light
Camera Angle Horizontal 82°, Vertical 66.5°
Angle Adjustment
Temperation
Dimesion(mm)
Diameter(pie) 0.5 0.65 0.8 1
Distance(M) 28 50 70 115
Distance(TIV Cable)
DRC-41UN
4wires(Polariry)C
C-MOS(COLOR)
Duplex
0.1Lux(300mm from camera)
LED (Operation in Dark)
Up, Down, Left, Right, 10° each
-10°C(tested up to -40°C) ~ +50°C
130(W) X 182(H) X 39(D)
3. Package
Door Camera Flush box
Connector
(4PX200) Manual
카메라
Screw(4EA)
FHM(LENCH) 4X40
1/3 Inch

Printed In Korea / 2016.04.105
PM1041UN0010
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com