Commax DPV-4HP2 User manual

Thank you for purchasing COMMAX products.
Please carefully read this User’s Guide (in particular, precautions for safety)
before using a product and follow instructions to use a product exactly.
The company is not responsible for any safety accidents caused by abnormal
operation of the product.
Model No. DPV-4HP2
VIDEO
DOOR PHONE
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
Printed In Korea / 2008.11
.in.ua
www.commax.in.ua

1
Table of Contents
Warnings and caution
1. Parts Names & Functions
2. Operation
3. Installation Method
4. Wiring
5. Parts list
6. Specifications
1
 ! ! % %$
2
4
5
6
7
8
9



Make sure to follow the instructions to prevent any danger or property losses.
Do not put the plug in the socket
simultaneously.
It may generate abnormal heat
or cause a fire.
Do not connect to other products
while in use.
It may cause breakdown.
Do not forcibly bend the cord or
put a heavy object on the prod-
uct.
It may cause a fire.
Do not use water, thinner or a deter-
gent used to wash oil products when
you wash the exterior.
Make sure to wash it by using a dry cloth to
prevent any breakdown or electric shock.
Do not install the product in a
humid place.
It may cause an electric shock or
a fire.
Do not forcibly pull out the
cord from the socket.
If the cord is damaged, it may
cause a fire or an electric shock.
Do not put the plug in the sock-
et with a wet hand.
It may cause an electric shock.
Do not disassemble, repair or
modify the product.
It may cause a fire, an electric shock
or an injury due to malfunction of the
product.
Do not use AC circuit breaker.
It may cause an electric shock.




#
#




If the socket holes are larger
than normal, do not put the
plug.
It may cause an electric shock
or a fire.
Make sure that dust or foreign
substances are not gathered
on the product.
Make sure to prevent foreign
substances from entering the
product.
It may cause a breakdown.
Do not put a heavy object on
the product.
It may cause a breakdown.
Do not disassemble or give an
impact to the product.
Avoid direct rays of the sun or
heating devices at a time of
installation.
Install the product in a flat and
stable place.
Otherwise, it may not function
properly.
Pull the plug if the product is
not used for a long time.
If the product generates strange
sound, make sure to pull the
plug immediately and contact
Commax service center.




&
&
%
%


!
!
23
#  $ &%! #  $ &%!
It indicates prohibition.
It indicates prohibition of disassembly.
It indicates prohibition of contact.
It indicates dos and don’ts.
It indicates that the plug should be pulled out from the socket.
It indicates prohibition.
It indicates prohibition of disassembly.
It indicates prohibition of contact.
It indicates dos and don’ts.
It indicates that the plug should be pulled out from the socket.
Warning
Death or serious
injury is expected.
Caution
An injury or property
losses are expected

1. Calling from a Camera unit.( In case of install a camera)
45
#%$$& %! $ "#%! 
1 Handset
2 Hook Switch
3 Monitor Screen
4 Connection Terminal Connect the Camera and the Interphone
5 LED Power Status and the camera indication.
6 Monitor Button Press the button when the householder wants to see the front
door situation
7 Interphone Button Call the Interphone after picking up a handset.
8 Door Release Button When this button is pressed, while communication
between a monitor and a camera unit, the door is opened.
9 Volume control switch. Control the volume
10 Power On/Off Switch On/off power.
11 Brightness Control Switch Control the Brightness.
12 AC Powercode
13 Handset Connector Socket Connect Handset after installation
No. Name Description
! A view of the front door can be seen anytime the
entrance button is pressed and a dialog can be
made with anyone at the front door.
the visitor’s image appears on the monitor
hang-up the handset
dialog begins

to check
open the door
dialog duration is
up to 90 seconds at
a time
the door release function oper-
ates only when the visitor’s
image is displayed on the screen
a chime
sounds
a chime
sounds
The visitor
presses the
call button on
the camera1
The visitor
presses the
call button on
the camera2
"
""
ends the call
"
""
"
"
" "
press the butten
camera 1 view
The lamp is blink-
ing on green
color.
camera 2 view
The lamp is blink-
ing on orange
color.
Press twice
Press once

67
* Note:
- Do not install near magnetic activity, humid temperatures, extreme heating conditions,
under direct sunlight as these may damage the condition and performance of the prod
ucts.
- The position of the unit’s body should fit the standard height from the range which is
recommended to be from 1450~ 1500.
* Wires descriptions of camera.
1. Red: Voice 2. Blue: GND 3. Yellow: Power(+12V) 4. White: Video
 $%%! %!
# 
* Note:
- Do not install the camera where it is exposed to direct sunlight.
- Keep cleaning up its lens to capture good views.
Installation method of a camera unit.
Monitor
2. Communication with the optional Interphone
- DPV-4HP2 -
a three-way conversation can take
place if the monitor or interphone is
picked up simultaneously
"
hang-up the
handset
"
end the dialog
a ‘beep’ will be
heard
""
A visitor
calls from
the entrance
a chime rings simulta-
neously from both the
monitor and inter-
phone
" "
open the door
Call from
the monitor
"
Call to the
monitor
""
dialog begins
dialog begins
dialog begins

8
#%$$%
* Wiring precautions
1. If high voltage cables are present in the vicinity, use a coaxial cable with metal outer
casing.
2. If any internal wires is exposed through mis-wiring, it may cause a short and become
a cause of malfunction or fire.
3. When connecting the monitor and camera, make sure that the monitor power is off.
(turn on the power after plugging the AC power cord into the outlet)
Monitor(main unit) Mounting bracket User’s guide
Handset Mounting
screw
4 pin
connector
screw
(for monitor)

"%! $
Rating Voltage AC 100 -240V~, 50/ 60Hz
Consumption operation : 14W
Wiring method To a Camera unit : 4 wires polarity, To an Interphone : 4 wires polarity
Monitor 4#CRT
Communication method Full duplex (Handset)
Call tone Call sound from camera: electronic chime,
Interphone : electronic buzzer
Monitor Display 90 ±20sec
Distance from Camera 28m(Ø 0.5)/ 50m(Ø 0.65)/ 70m(Ø 0.8)
Working Temperature 0 ~ +40$(32°F ~ 104°F)
Weight 1.2Kg
Dimension(mm) 189(W) %208(H) %56.5(D)
Model DPV-4HP2
9