Commell LE-37E User manual

LE-37E
3.5 inch Motherboard
User’s Manual
Edition 1.4
2016/07/04

LE-37E User’s Manual
-1-
Copyright
Copyright 2015, all rights reserved. This document is copyrighted and all rights are reserved.
The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT

LE-37E User’s Manual
-2-
Packing List:
Please check the package content before you starting using the board.
Optional:
1 x LE-37E 3.5 inch Motherboard
(Include Heat Sink)
(Heat Sink : OHS-A / 2181110012)
1 x SATA cable
(OALSATA3-L / 1040529)
1 x PS/2 Keyboard & Mouse cable
(OALPS2/KM / 1040131)
1 xDC Input Power cable
(OALDC-A / 1040433)
1 x Audio cable
(OALPJ-HDUNB / 1040123)
1 xUSB2.0 cable
(OALUSBA-3 / 1040173)
1 x Onboard DVI-D cable
(BADPDVI_A & OALDVI-DF13
/ 4120008011 & 1040483)
1 x Dual COM cable
(OALES-BKU2NB / 1040090)
1 x COM Cable
(OALES-BKU1NB / 1040086)
1 x SATA Power cable
(OAL4P-S2 / 1040054)
1 x 1 to 3 Power output cable
(OAL4P-2 / 1040051)
Heat spreader (OHS-ANF /
2181110018)

LE-37E User’s Manual
-3-
Index
Chapter 1 <Introduction>.....................................................................................4
1.1 <Product Overview>.................................................................................4
1.2 <Product Specification> ...........................................................................5
1.3 <Mechanical Drawing>.............................................................................6
1.4 <Block Diagram>......................................................................................7
Chapter 2 <Hardware setup>...............................................................................8
2.1 <Connector Location and Reference>.....................................................8
2.1.1 <Internal connectors list> .............................................................9
2.1.2 <External connectors list>............................................................9
2.2 <Jumper Location and Reference>........................................................10
2.2.1 <Jumper list>..............................................................................10
2.2.2 <Clear CMOS and Power on type selection> ............................10
2.3 <Installing the Memory>......................................................................... 11
2.4 <I/O interface>........................................................................................12
2.4.1 <Serial ATA interface> ................................................................12
2.4.2 <Ethernet interface>...................................................................12
2.4.3 <Display interface>.....................................................................13
2.4.4 <Serial Port interface>................................................................15
2.4.5 <USB interface> .........................................................................17
2.4.6 <Audio interface> .......................................................................17
2.4.7 <Expansion slot>........................................................................18
2.4.8 <Front panel switch and indicator> ............................................19
2.4.9 <Other interface>........................................................................19
2.5 <Power supply>......................................................................................22
2.5.1 <Power input> ............................................................................22
2.5.2 <Power output>..........................................................................22
Appendix A <Flash BIOS>..................................................................................23
Appendix B <Installation driver Notes>............................................................24
Appendix C <LCD Panel Type select> ..............................................................25
Appendix D <Programmable GPIO > ................................................................26
Appendix E <Programmable Watch Dog Timer>.............................................27
Appendix F <SATA RAID function setting>......................................................28
Appendix G <Heat Sink Note>...........................................................................29
Contact information............................................................................................30

LE-37E User’s Manual
-4-
Chapter 1 <Introduction>
1.1 <Product Overview>
LE-37E is 3.5 inch Motherboard which supports 5th/4th Generation Intel® Core™ U-series i7,
i5, i3, Celeron Mobile Processor with Wildcat Point PCH-LP, integrated HD Graphics,
DDR3L memory, Realtek High Definition Audio, Intel Gigabit LAN, Serial ATA3 with AHCI
function for a system.
Intel Broadwell-U Processor with Wildcat Point PCH-LP
The 5th Generation Intel® Core™ U-series processor family is the next generation and
compatible with Haswell-U, multi-core mobile processor built on 14/22 nanometer process
with MCP technology.
The Broadwell-U has a lower TDP 15W and 28W, it provides new HD Graphics (GT2 and
GT3 GPU) support triple display at the same time, maximum supported is up to 16GB of
DDR3L, better performance, flexibility and more enhanced security that is suitable for a
variety of intelligent systems the ideal choice.
All in One multimedia solution
The board provides high performance onboard graphics, 24-bit dual channel LVDS interface,
DisplayPort, HDMI, and High Definition Audio, to meet the very requirement of the
multimedia application.
Flexible Expansion Interface
The board provides two MiniPCIe and support mSATA, SIM.

LE-37E User’s Manual
-5-
1.2 <Product Specification>
System
Processor
Intel® Broadwell/Haswell Core™ i7, i5, i3, Celeron U-series Processor
FCBGA1168 with MCP
Chipset
Wildcat Point-LP
Memory
1 x DDR3L SO-DIMM 1333/1600 MHz up to 8GB
Support Non-ECC, unbuffered memory only
Watchdog Timer
Generates a system reset with internal timer for 1min/s ~ 255min/s
Real Time Clock
Chipset integrated RTC with onboard lithium battery
Expansion
2 x MiniPCIe (support mSATA) and Card2 half-size choosable,
1 x SIM slot
Graphics
Chipset
Intel® Gen 8/ 7.5 integrated HD Graphics
Display Interface
1 x HDMI/DVI-D, 1 x DisplayPort/DVI-D, 1 x LVDS
LAN
Chip
1 x Intel® I210-AT Gigabit LAN(Optional)
1 x Intel® I218-LM Gigabit LAN (Support iAMT10.0)
I/O
Serial ATA
2 x SATA3 support RAID 0, 1
Audio
Realtek ALC888 HD Audio
Digital I/O
Programmable 8-bit GPIO with 12 pin-header
Internal I/O
2 x SATA3, 1 x RS232/422/485, 4 x RS232, 1 x PS/2, 4 x USB2.0,
1 x LVDS, 1 x LCD inverter, 1 x LPC, 1 x SMBUS, 1 x DIO, 1 x Audio,
1 x DC Out
Rear I/O
1 x RS232, 1 x HDMI/DVI-D, 1 x DisplayPort/DVI-D, 2 x USB3.0, 2 x LAN
Mechanical & Environmental
Power Requirement
DC input 9~24V
Size & Thickness
146mm x 101mm (L x W), 1.6mm
Temperature
Operating within 0°C~60°C (32°F~140°F)
Storage within -20°C~80°C (-4°F~176°F)
Relative Humidity
10%~90%, non-condensing

LE-37E User’s Manual
-6-
1.3 <Mechanical Drawing>

LE-37E User’s Manual
-7-
1.4 <Block Diagram>
CPU
5th/4th
Gen Processor
PCH-LP
DDR3L
SO-DIMM
1 x DisplayPort
PTN3460
1 x LVDS
SIO
NCT6106D
DDI
Channel A
eDP
2 x SATA3
SATA3
2 x USB3.0
4 x USB2.0
USB3.0
USB2.0
SPI Flash
SPI
PCIe x1
I218-LM
HDA
HD Audio
PCIe x1
SATA3
LPC
1 x LPC
ALC888
5 x RS232
1 x SMBUS
1 x PS/2
I210-AT
PCIe x1
MiniCard1
SATA3
PCIe x1
MiniCard2
1 x RS232/422/485
1 x DIO
1 x DVI-D
SMBUS
GPIO
1 x HDMI
DDI
1 x DVI-D

LE-37E User’s Manual
-8-
Chapter 2 <Hardware setup>
2.1 <Connector Location and Reference>
CN_LVDS
MINI_CARD1
CN_LPC
CN_AUDIO
DC_IN
CN_USB1
JFRNT
SATA3-2
CN_COM5/6
CN_INV
DC_OUT
SYSFAN
CPUFAN
SMBUS
MINI_CARD2
1
CN_COM3/4
CN_COM2
CN_DIO
SO-DIMM
CN_PS2
SATA3-1
CN_USB2
COM1
HDMI/CN_DVI1
DisplayPort
LAN1
LAN2
USB
CN_DVI2
SIMM

LE-37E User’s Manual
-9-
2.1.1 <Internal connectors list>
Connector
Function
SO-DIMM
204-pin DDR3L SO-DIMM slot
SATA3-1/2
7-pin Serial ATA3 connector
CN_AUDIO
5 x 2-pin audio pin header
CN_LPC
6 x 2-pin LPC pin header
CN_DIO
6 x 2-pin General Purpose In/Out pin header
CN_LVDS
20 x 2-pin LVDS connector
CN_INV
5-pin LCD inverter connector
CN_DVI1
10 x 2-pin DVI connector
CN_DVI2
10 x 2-pin DVI connector
CN_COM2
10-pin RS232/422/485 connector
CN_COM3/4
20-pin RS232 connector
CN_COM5/6
20-pin RS232 connector
CN_USB1/2
5 x 2-pin USB2.0 pin header
CN_PS2
5 x 2-pin PS/2 pin header
SMBUS
5-pin SMBus connector
SIMM
6-pin SIM card slot
CPUFAN
4-pin CPU fan connector
SYSFAN
4-pin system fan connector
JFRNT
5 x 2-pin front panel switch/indicator pin header
MINI_CARD1/2
52-pin MiniPCIe card slot
DC_OUT
4-pin SATA Power connector
DC_IN
4-pin ATX12V power connector
2.1.2 <External connectors list>
Connector
Function
COM1
DB9 connector
DisplayPort
DisplayPort connector
HDMI
HDMI connector
USB
2 x USB3.0 connector
LAN1
RJ45 connector
LAN2
RJ45 connector

LE-37E User’s Manual
-10-
2.2 <Jumper Location and Reference>
2.2.1 <Jumper list>
Jumper
Function
JAT
Power mode select
JRTC
CMOS Normal/Clear Setting
JVLCD
Panel Voltage Setting
JMSATA1/2
MiniCard1/2 mSATA Setting
JCSEL1/2
CN_COM2 RS232/422/485 select
JP1/2
COM1 and CN_COM2 9-pin setting
2.2.2 <Clear CMOS and Power on type selection>
JRTC: Clear CMOS data jumper
Jumper settings
Function
1-2
Clear CMOS
2-3
Normal (Default)
JAT: AT/ATX mode select jumper
Jumper settings
Function
1-2
AT mode
2-3
ATX mode (Default)
JRTC
JVLCD
JMSATA2
JAT
JMSATA1
JP2
JP1
JCSEL1
JCSEL2

LE-37E User’s Manual
-11-
2.3 <Installing the Memory>
In the process, the board must be powered off.
1. Put the memory tilt into the slot. Note the Memory notch key aligned slot key.
2. Then press down till lock into the mounting notch.
3. To remove the memory, push outward on both sides of the latch.
Key
Mounting notch
Press down
Latch

LE-37E User’s Manual
-12-
2.4 <I/O interface>
2.4.1 <Serial ATA interface>
Support RAID0 and 1.
2.4.2 <Ethernet interface>
The board provide I210-AT and I218-LM Gigabit Ethernet which supports WOL on
rear I/O.
It supports Intel® AMT 10.0 feature.
(Note that the CPU must support vPro technology, ex: i7-5650U)
I218-LM
SATA3-1
SATA3-2
I210-AT

LE-37E User’s Manual
-13-
2.4.3 <Display interface>
Based on the 5th/4th Gen CPU with built-in HD Graphics, the DisplayPort up to
3840x2160 @ 60Hz, the HDMI resolution up to 2560x1600 @ 60Hz and LVDS
(PTN3460) up to 1920x1200 @ 60Hz support 18/24-bit color depth and dual
channel.
The built-in HD Graphics support triple display function with clone mode and
extended mode.
Note1: DisplayPort and CN_DVI2 can not use at the same time.
Note2: HDMI connector can change like CN_DVI2 pin-header.
CN_DVI1/2: DVI 20-pin connector
Pin
Signal
Pin
Signal
1
5V
2
NC
3
HPD
4
GND
5
TMDS_TX0-
6
TMDS_TX0+
7
GND
8
TMDS_TX1-
9
TMDS_TX1+
10
GND
11
TMDS_TX2-
12
TMDS_TX2+
13
GND
14
TMDS_CLK-
15
TMDS_CLK+
16
GND
17
SDA
18
SCL
19
NC
20
NC
CN_DVI2
DisplayPort
CN_LVDS
1
40
JVLCD
2
39
1
19
2
20
1
2
HDMI/CN_DVI1
5
6
CN_INV
5
1

LE-37E User’s Manual
-14-
CN_LVDS: LVDS 40-pin connector (Model: HIROSE DF13-40DP-1.25V compatible)
Pin
Signal
Pin
Signal
2
Set by JVLCD
1
Set by JVLCD
4
Detect (Active low)
3
GND
6
A_LVDS_0-
5
B_LVDS_0-
8
A_LVDS_0+
7
B_LVDS_0+
10
GND
9
GND
12
A_LVDS_1-
11
B_LVDS_1-
14
A_LVDS_1+
13
B_LVDS_1+
16
GND
15
GND
18
A_LVDS_2-
17
B_LVDS_2-
20
A_LVDS_2+
19
B_LVDS_2+
22
GND
21
GND
24
A_LVDS_CLK-
23
B_LVDS_3-
26
A_LVDS_CLK+
25
B_LVDS_3+
28
GND
27
GND
30
A_LVDS_3-
29
B_LVDS_CLK-
32
A_LVDS_3+
31
B_LVDS_CLK+
34
GND
33
GND
36
LVDS_DDCSCL
35
NC
38
LVDS_DDCSDA
37
NC
40
NC
39
NC
Note: Pin4 only need to be connected to GND
CN_INV: LVDS 5-pin Backlight power connector
Pin
Signal
1
12V
2
Backlight Control
3
Reserve
4
GND
5
Enable Backlight
JVLCD: LVDS panel power select jumper
Jumper settings
Function
1-2
3.3V (Default)
3-4
5V
5-6
12V
Effective patterns of connection: 1-2 / 3-4 / 5-6
Other may cause damage

LE-37E User’s Manual
-15-
2.4.4 <Serial Port interface>
COM1: RS232 DB9 connector
Pin
Signal
Pin
Signal
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
Set by JP2
10
Key
CN_COM2: RS232/422/485 10-pin header (Pitch 1.27mm x 2.54mm)
Pin
Signal
Pin
Signal
1
DCD/ 422TX-/ 485-
2
RXD/ 422TX+/ 485+
3
TXD/ 422RX+
4
DTR/ 422RX-
5
GND
6
DSR
7
RTS
8
CTS
9
Set by JP1
10
Key
Note: Use JCSEL1 and JCSEL2 to select communication mode
CN_COM2
1
2
9
10
CN_COM3/4
CN_COM5/6
1
2
19
20
1
2
20
19
2
1
6
5
JP1
JP2
2
6
1
5
JCSEL1
1
2
11
12
JCSEL2
1
2
5
6
COM1

LE-37E User’s Manual
-16-
COM3/4,5/6: RS232 20-pin header (Pitch 1.27mm x 2.54mm)
Pin
Signal
Pin
Signal
1
DCD1
2
RXD1
3
TXD1
4
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
10
NC
11
DCD2
12
RXD2
13
TXD2
14
DTR2
15
GND
16
DSR2
17
RTS2
18
CTS2
19
RI2
20
Key
JP1, JP2: COM1, COM2 pin-9 setting
Jumper settings
Function
1-2
5V
3-4
12V
5-6
RI (Default)
Effective patterns of connection: 1-2 / 3-4 / 5-6
Other may cause damage
JCSEL1, JCSEL2: For configure COM2 communication mode
Function
JCSEL1
JCSEL2
RS232
RS485
RS422
1
12
1
12
1
12
6
1
5
1
5
1
2
11
2
11
2
11
2
2
2
5
6
6

LE-37E User’s Manual
-17-
2.4.5 <USB interface>
CN_USB1/2: Front panel USB2.0 10-pin header (Pitch 2.54mm)
Pin
Signal
Pin
Signal
1
5VSB
2
5VSB
3
DATA0-
4
DATA1-
5
DATA0+
6
DATA1+
7
GND
8
GND
9
GND
10
Key
2.4.6 <Audio interface>
CN_AUDIO
2
9
CN_USB1
1
10
10
2
9
USB3.0
1
CN_USB2
1
2
9
10

LE-37E User’s Manual
-18-
CN_AUDIO: Front panel audio 10-pin header (Pitch 1.27mm x 2.54mm)
Pin
Signal
Pin
Signal
1
MIC_L
2
GND
3
MIC_R
4
NC
5
FP_OUT_R
6
MIC_DETECT
7
SENSE
8
Key
9
FP_OUT_L
10
FP_OUT_DETECT
2.4.7 <Expansion slot>
MINI_CARD2 have some special design to compatible our MiniPCIe card (ex:
MPX-574D2, MPX-210D2 etc) and MINI_CARD1/2 supports mSATA set by
JMSATA1/2.
MINI_CARD1 supports SIM card to use 3G module.
JMSATA1/2: Setting MINI_CARD1/2 to support PCIe/mSATA
Jumper settings
Function
1-2
Support mSATA
2-3
Normal operation (Default)
Note: JMSATA1 set the MINI_CARD1, JMSATA2 set the MINI_CARD2
MINI_CARD1
JMSATA1
MINI_CARD2
1
3
1
3
JMSATA2

LE-37E User’s Manual
-19-
2.4.8 <Front panel switch and indicator>
JFRNT: Front panel switch and indicator 14-pin header (Pitch 2.54mm)
Pin
Signal
Pin
Signal
1
Power_ON-
2
Power_ON+
3
Speaker-
4
Speaker+
5
HDD_LED-
6
HDD_LED+
7
Power_LED-
8
Power_LED+
9
Reset+
10
Reset-
2.4.9 <Other interface>
JFRNT
2
CN_DIO
1
12
9
10
2
11
1
CN_LPC
1
11
12
2
SMBUS
1
5
CPUFAN
1
4
SYSFAN
1
4