Commell LS-573 User manual

LS-573
5.25” Embedded Miniboard
User’s Manual
Edition 1.02
2009/08/25

LS-573 User’s Manual
-1-
Copyright
Copyright 2008, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice
to make improvements to the products.
This document contains proprietary information and protected by copyright. No part
of this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property
of their respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages
resulting from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular
purpose.
The company has the right to revise the manual or include changes in the
specifications of the product described within it at any time without notice and
without obligation to notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.tw

LS-573 User’s Manual
-2-
Packing List:
Please check the package content before you starting using the board.
Hardware:
LS-573 Embedded Miniboard x 1
Cable Kit:
CPU Cooler x 1
Quad COM ports DB9 male Cable x 1
Printer Port Cable x 1
USB Cable x 2
SATA Cable x 2
ATX Power Output Cable x 1
DVI module with DVI Cable x 1
(Only LS-573TXD)
HD Audio Port Cable x 1
COM port Cable x 1
CRT cable x 1 (Only LS-573T2X)

LS-573 User’s Manual
-3-
Printed Matters:
Driver CD x 1 (Including User’s Manual)
HDTV cable x 1 (Optional) SDTV cable x 1 (Optional)

LS-573 User’s Manual
-4-
Index
Chapter 1 <Introduction> ........................................................................................................7
1.1 <Product Overview>.............................................................7
1.2 <Product Specification> .......................................................8
1.3 <Mechanical Drawing>......................................................10
1.4 <Block Diagram> ...............................................................11
Chapter 2 <Hardware Setup>................................................................................................12
2.1 <Connector Location>........................................................12
2.2 <Jumper Location & Reference>........................................14
2.3 <Connector Reference>......................................................16
2.3.1 <Internal Connectors>.............................................16
2.3.2 <External Connectors>............................................16
2.4 <CPU and Memory Setup> ................................................17
2.4.1 <CPU Setup>...........................................................17
2.4.2 <Memory Setup>.....................................................18
2.5 <CMOS Setup> ..................................................................19
2.6<Serial ATA Interface>........................................................20
2.7 <Ethernet Interface>...........................................................21
2.8 <Onboard Display Interface>.............................................22
2.8.1 <Digital Display> ....................................................23
2.8.2 <HDTV Interface>...................................................27
2.9 <Integrated Audio Interface>..............................................28
2.10 <GPIO Interface> .............................................................30
2.11 <Power Supply> ...............................................................31
2.11.1.1<DC_IN Input>....................................................31
2.11.1.2 <ATX Output>....................................................32
2.11.2 <ATX Power Mode>..............................................33
2.12 <Switch and Indicator>.....................................................34
Chapter 3 <System Setup>....................................................................................................35