Commell LE-37I7S User manual

LE-37I
3.5 inch Motherboard
User’s Manual
Edition 1.0
2016/10/11

LE-37I User’s Manual
-1-
Copyright
Copyright 2015, all rights reserved. This document is copyrighted and all rights are reserved.
The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT

LE-37I User’s Manual
-2-
1 x VGA Cable
(OALVGA-SNB-7) / (1040557)
Packing List:
Please check the package content before you starting using the board.
Printed Matters:
Driver CD (Including User’s Manual) x 1
1 x LE-37I Motherboard
(Include Heat spreader for LE-37IS series)
(Include Fan for LE-37IF series)
1 x DVI module with bracket
(BADPDVIP_A & OALDVI-DF13)
(4120008021 & 1040483)
2 x SATA CABLE
(OALSATA3-H10-L35 / 1040523)
1 x Audio cable
(OALPJ-HDUNB / 1040123)
1 x SATA Power Cable
(OALSATA15-2PJ / 1040613)
1 x COM Cable
(OALES-BKU1NB / 1040086)
1 x PS/2 Keyboard & Mouse cable
(OALPS2/KM / 1040131)
1 xUSB2.0 cable
(OALUSBA-3 / 1040173)
(Optional)
+
_
1 xDC Input Power Cable
(OALDC-B / 1040513)
1 x Dual COM cable
(OALES-BKU2NB / 1040090)
(Optional)

LE-37I User’s Manual
-3-
Index
Chapter 1 <Introduction>............................................................... 4
1.1 <Product Overview>............................................................4
1.2 <Product Specification> ...................................................... 5
1.3 <Block Diagram>.................................................................6
Chapter 2 <Hardware setup>......................................................... 7
2.1 <Connector Location and Reference> ................................7
2.1.1 <Internal connectors list> ..........................................8
2.1.2 <External connectors list>.........................................8
2.2 <Memory Setup>.................................................................9
2.3 <Jumper Location and Reference> ...................................10
2.3.1 <Jumper list> .......................................................... 10
2.3.2 <Clear CMOS and Power on type selection>.......... 11
2.4 <I/O interface> .................................................................. 11
2.4.1 <Serial ATA interface>............................................. 11
2.4.2 <Ethernet interface>................................................12
2.4.3 <Display interface> .................................................12
2.4.4 <Serial Port interface> ............................................15
2.4.5 <USB interface>......................................................18
2.4.6 <Audio interface>....................................................19
2.4.7 <Expansion slot>.....................................................20
2.4.8 <Front panel switch and indicator> ......................... 21
2.4.9 <GPIO and Other interface> ...................................21
2.5 <Power supply> ................................................................23
2.5.1 <Power input>.........................................................23
2.5.2 <Power output>.......................................................24
Appendix A <Flash BIOS> ........................................................... 25
Appendix B <LCD Panel Type select> ........................................ 25
Appendix C <Programmable Watch Dog Timer> ....................... 27
Appendix D <Hardware monitor > ..............................................28
Appendix E <Programmable GPIO > .......................................... 29
Appendix F <RAID Setting>......................................................... 30
Contact information .....................................................................31

LE-37I User’s Manual
-4-
Chapter 1 <Introduction>
1.1 <Product Overview>
LE-37I is 3.5 inch Motherboard which supports 6th Generation Intel® Core™ i7, i5, i3,
H-series Processor with Intel® QM170 Chipset, integrated HD Graphics 530, DDR4
memory, Realtek High Definition Audio, Intel Gigabit LAN, Serial ATA3
Intel Skylake-H Processor with Intel® QM170 Chipset PCH-H
The 6th Generation Intel® Core™ H-series processor family is new generation and
multi-core processor built on 14 nanometer process.
Skylake provide new HD Graphics 530 support triple displays at the same time, maximum
supported is up to 16GB of DDR4, better performance, flexibility and more enhanced
security that is suitable for a variety of intelligent systems the ideal choice.
All in One multimedia solution
LE-37I provides high performance onboard graphics, 18/24-bit single/dual channel LVDS
interface, DisplayPort, DVI, CRT and High Definition Audio, to meet the requirement of the
multimedia application.
Flexible Expansion Interface
It includes two minicard slot, 6 x COM port, 4 x USB3.0, and 4 x USB2.0.
Skylake remove EHCI
When you install WIN7 with USB device(CDROM, Keyboard, Mouse...), Windows7 can not
identify your usb device. You can use SATA CD-ROM and PS/2 to install Windows7.

LE-37I User’s Manual
-5-
1.2 <Product Specification>
System
Processor
Intel® Skylake Core™ i7, i5, i3 H-seriesProcessor, FCLGA1440 package
Chipset
Intel® QM170 PCH-H
Memory
1 x DDR4 SO-DIMM 2133 MHz up to 16GB,
Support Non-ECC, unbuffered memory only
Watchdog Timer
Generates a system reset with internal timer for 1min/s ~ 255min/s
Real Time Clock
Chipset integrated RTC with lithium battery
Expansion
2 x MiniPCIe (support mSATA)
1 x Sim slot
Graphics
Chipset
Intel® 9th Gen integrated HD Graphics
Display Interface
1 x DVI, 1 x HDMI, 1 x DisplayPort, 1 x LVDS, 1 x CRT
LAN
Chip
1 x Intel® I219-LM Gigabit PHY LAN (Support iAMT11.0)
1 x Intel® I210-AT Gigabit LAN
I/O
Serial ATA
2 x SATA3
Audio
Realtek ALC262 HD Audio
Internal I/O
2 x SATA3, 4 x RS232, 4 x USB2.0, 1 x LVDS, 1 x LPC, 1 x PS/2
1 x LCD inverter, 1 x GPIO , 1 x Audio, 1 x SMBUS, 1 x CRT, 1 x DVI
1 x RS232/422/485
Rear I/O
1 x HDMI , 1 x DisplayPort,4 x USB3.0, 2 x LAN, 1 x RS232
Mechanical & Environmental
Power Requirement
DC 9~24V
Size & Thickness
146mm x 101mm (L x W), 1.6mm
Temperature
Operating within 0°C~60°C (32°F~140°F)
Storage within -20°C~80°C (-4°F~176°F)
Relative Humidity
10%~90%, non-condensing

LE-37I User’s Manual
-6-
1.3 <Block Diagram>
CPU
6th
Gen Processor
QM170
PCH-H
1 x DisplayPort
1 x HDMI
DDI
PTN3460
1 x LVDS
eDP
eDP
2 x SATA3
SATA3
4 x USB3.0
4 x USB2.0
USB3.0
USB2.0
SPI Flash
SPI
I219-LM
HDA
HD Audio
LPC
1 x LPC
ALC262
1 x SMBUS
SMBus
DDI
Channel A
DDR4 SO-DIMM 1.2V
SIO
NCT6106D
5 x RS232
1 x RS232/RS422/RS485
1 x GPIO
1 x PS/2
MiniPCIe
/ mSATA
PCIe
PTN3355
DMI GEN3
PCIe
I210-AT
1 x CRT
1 x DVI
DDI
MiniPCIe
/ mSATA
SATA3
PCIe
SATA3
PCIe

LE-37I User’s Manual
-7-
Chapter 2 <Hardware setup>
2.1 <Connector Location and Reference>
CN_USB2-2 CN_USB2-1 SYSFAN CPUFAN
CN_PS2
JFRNT
CN_CRT CN_DVI
CN_AUDIO
CN_LPC
CN_DIO
CN_COM5/6
CN_COM3/4
CN_COM2
MINICARD2
MINICARD1
SIMM
DDR4
CN_BAT CN_SMBUS
I219
I210
COM1
USB3.0
USB3.0
HDMI
Display Port

LE-37I User’s Manual
-8-
2.1.1 <Internal connectors list>
Connector
Function
DDR4
260-pin DDR4 SO-DIMM slot
SATA3-1/2
10-pin Serial ATA3 connector
CN_AUDIO
5 x 2-pin audio pin header
CN_LPC
6 x 2-pin LPC pin header
CN_LVDS
20 x 2-pin LVDS connector
CN_INV
5-pin LCD inverter connector
CN_SMBUS
5-pin SMBus connector
CN_COM2
20-pin RS232/485/422 for COM2
CN_COM3/4 / 5/6
20-pin RS232 connector
CN_USB 2-1 / 2-2
5 x 2-pin USB2.0 pin header
CN_DIO
6 x 2-pin digital I/O connector
CN_CRT
16-pin VGA connector
CN_BAT
2-pin Battery connector
CN_DVI
10 x 2-pin DVI connector
CPUFAN
4-pin CPU fan connector
SYSFAN
4-pin system fan connector
JFRNT
10-pin front panel switch/indicator connector
MINI_CARD1
52-pin MiniPCIe card slot (support MSATA by JMSATA1)
MINI_CARD2
52-pin MiniPCIe card slot (support MSATA by JMSATA2)
DC_IN
2-pin power input Terminal Block
SIMM
6-pin socket
2.1.2 <External connectors list>
Connector
Function
DisplayPort
DisplayPort connector
HDMI
HDMI connector
RJ45-1/2
RJ45 connector
USB3.0 1/2
USB3.0 connector
COM1
DB9 Serial port connector

LE-37I User’s Manual
-9-
2.2 <Memory Setup>
In the process, the board must be powered off.
1. Put the memory tilt into the slot. Note the Memory notch key aligned slot key.
2. Then press down till lock into the mounting notch.
3. To remove the memory, push outward on both sides of the latch.
Press down
Mounting notch
KEY
LATCH

LE-37I User’s Manual
-10-
2.3 <Jumper Location and Reference>
2.3.1 <Jumper list>
Jumper
Function
JAT
Power mode select
JRTC
CMOS Normal/Clear Setting
JVLCD
Panel Voltage Setting
JMSATA1
MiniCard 1 MSATA Setting
JMSATA2
MiniCard 2 MSATA Setting
JP1
COM1 Voltage Setting (For Pin 9)
JP2
COM2 Voltage Setting (For Pin 9)
JCSEL1
COM2 RS-232 RS422 RS485 Setting
JCSEL2
COM2 RS-232 RS422 RS485 Setting
JAT
JMSATA1
JMSATA2
JCSEL1
JCSEL2
JP1
JP2
JVLCD
JRTC

LE-37I User’s Manual
-11-
2.3.2 <Clear CMOS and Power on type selection>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
JAT: AT/ATX mode select jumper
JRTC: Clear CMOS data jumper
Jumper settings
Function
1-2
Clear CMOS
2-3
Normal (Default)
2.4 <I/O interface>
2.4.1 <Serial ATA interface>
CN_SATA3-1/2: SATA3 10-pin connector
Jumper settings
Function
1-2
AT mode
2-3
ATX mode (Default)
Pin
Signal
1
GND
2
TX+
3
TX-
4
GND
5
NA
6
NA
7
GND
8
RX-
9
RX+
10
GND
CN_SATA3-2 CN_SATA3-1
JRTC
3
1
JAT
3
1
CN_SATA3-1/2
10
1

LE-37I User’s Manual
-12-
2.4.2 <Ethernet interface>
The board provide I219-LM PHY Gigabit Ethernet and I210-AT Gigabit Ethernet on
rear I/O.Intel I219-LM and I210 supports operation at 10/100/1000 Mb/s data rates,
with IEEE802.3 compliance and Wake-On-LAN supported.
2.4.3 <Display interface>
Based on the 6th Gen CPU with built-in HD Graphics 530, CRT and DVI up to
1920x1080@60Hz, DisplayPort up to [e-mail] the internal
Display, LVDS (PTN3460) up to 1920x1200@60Hz support 18/24-bit color depth
and single/dual channel. About select LCD Panel Type in BIOS, please refer
Appendix B.
The built-in HD Graphics support triple display function with clone mode and
extended mode.
CN_LVDS
40
2
39
1
JVLCD
5
1
6
2
5
CN_INV
CN_CRT
2 16
1 15
19
20
1
2
CN_DVI
I219
I210
1

LE-37I User’s Manual
-13-
CN_CRT: CRT 16-pin connector (Pitch 2.00 mm)
Pin
Signal
Pin
Signal
1
BR
2
BG
3
BB
4
NC
5
IOGND1
6
IOGND1
7
IOGND1
8
IOGND1
9
NC
10
IOGND1
11
NC
12
5VCDA
13
5HSYNC
14
5VSYNC
15
5VCLK
16
NC
CN_LVDS: LVDS 40-pin connector (Model: HIROSE DF13-40DP-1.25V compatible)
Pin
Signal
Pin
Signal
1
Set by JVLCD
2
Set by JVLCD
3
GND
4
Detect (Active low)
5
B_LVDS_0-
6
A_LVDS_0-
7
B_LVDS_0+
8
A_LVDS_0+
9
GND
10
GND
11
B_LVDS_1-
12
A_LVDS_1-
13
B_LVDS_1+
14
A_LVDS_1+
15
GND
16
GND
17
B_LVDS_2-
18
A_LVDS_2-
19
B_LVDS_2+
20
A_LVDS_2+
21
GND
22
GND
23
B_LVDS_3-
24
A_LVDS_CLK-
25
B_LVDS_3+
26
A_LVDS_CLK+
27
GND
28
GND
29
B_LVDS_CLK-
30
A_LVDS_3-
31
B_LVDS_CLK+
32
A_LVDS_3+
33
GND
34
GND
35
NC
36
LVDS_DDCSCL
37
NC
38
LVDS_DDCSDA
39
NC
40
NC
Note: Pin4 only need to be connected to GND

LE-37I User’s Manual
-14-
CN_INV: LVDS 5-pin Backlight power connector
Pin
Signal
1
12V
2
Backlight Control
3
GND
4
GND
5
Enable Backlight
JVLCD: LVDS panel power select jumper
Jumper settings
Function
1-2
3.3V (Default)
2-3
5V
5-6
12V
CN_DVI: DVIonboard 20-pin connector
Pin
Signal
Pin
Signal
1
+5V
2
N/C
3
HPD
4
Ground
5
TMDSTX0N
6
TMDSTX0P
7
Ground
8
TMDSTX1N
9
TMDSTX1P
10
Ground
11
TMDSTX2N
12
TMDSTX2P
13
Ground
14
Ground
15
TMDSTXCP
16
Ground
17
DVI_DA
18
DVI_SL
19
N/C
20
N/C

LE-37I User’s Manual
-15-
2.4.4 <Serial Port interface>
COM1: RS232 DB9 connector
Pin
Signal
Pin
Signal
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
Set by JP1
10
Key
CN_COM3/4
2 1
20 19
COM1
CN_COM5/6
2 1
20 19
CN_COM2
1
2
9
10
JP1 JP2
2
5
6
1
2
5
6
1
1
2
6
5
JCSEL1
12
1
11
2
JCSEL2

LE-37I User’s Manual
-16-
CN_COM2: RS232/422/485 10-pin header (Pitch 2.54 x 1.27mm)
Pin
Signal
Pin
Signal
1
DCD/ 422TX-/ 485-
2
RXD/ 422TX+/ 485+
3
TXD/ 422RX+
4
DTR/ 422RX-
5
GND
6
DSR
7
RTS
8
CTS
9
Set by JP2
10
Key
Note: Use JCSEL1 and JCSEL2 to select communication mode
COM3/4: COM 20-pin header (Pitch 2.54 x 1.27mm)
Pin
Signal
Pin
Signal
1
DCD1
2
RXD1
3
TXD1
4
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
10
NC
11
DCD2
12
RXD2
13
TXD2
14
DTR2
15
GND
16
DSR2
17
RTS2
18
CTS2
19
RI2
20
Key
COM5/6: COM 20-pin header (Pitch 2.54 x 1.27mm)
Pin
Signal
Pin
Signal
1
DCD1
2
RXD1
3
TXD1
4
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
10
NC
11
DCD2
12
RXD2
13
TXD2
14
DTR2
15
GND
16
DSR2
17
RTS2
18
CTS2
19
RI2
20
Key

LE-37I User’s Manual
-17-
JP1, JP2: COM1, COM2 pin-9 setting
Jumper settings
Function
1-2
5V
3-4
12V
5-6
RI (Default)
Effective patterns of connection: 1-2 / 3-4 / 5-6
Other may cause damage
JCSEL1, JCSEL2: For configure COM2 communication mode
Function
JCSEL1
JCSEL2
RS232
(Default)
RS485
RS422
2
5
6
1
2
5
6
1
2
5
6
1
2
1
11
12
2
1
11
12
2
1
11
12

LE-37I User’s Manual
-18-
2.4.5 <USB interface>
CN_USB 2-1/2-2: USB2.0 10-pin header (Pitch 2.54 mm)
Pin
Signal
Pin
Signal
1
5VSB
2
5VSB
3
DATA0-
4
DATA1-
5
DATA0+
6
DATA1+
7
GND
8
GND
9
GND
10
Key
9 1
10 2
CN_USB2-1
9 1
10 2
CN_USB2-2
USB3.0
USB3.0

LE-37I User’s Manual
-19-
2.4.6 <Audio interface>
CN_AUDIO: Front panel audio 10-pin header (Pitch 1.27mm x 2.54mm)
Pin
Signal
Pin
Signal
1
MIC_L
2
GND
3
MIC_R
4
NC
5
FP_OUT_R
6
MIC_DETECT
7
SENSE
8
Key
9
FP_OUT_L
10
FP_OUT_DETECT
CN_AUDIO
2 1
10 9