Commell LV-67J User manual

LV-67J
Mini-ITX motherboard
User’s Manual
Edition: 1.1
2013/03/15

LV-67J User’s Manual
2
Copyright
Copyright 2012 All rights reserved. This document is copyrighted and all rights are reserved.
The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT.

LV-67J User’s Manual
3
Packing List
Please check package component before you use our products.
Hardware:
LV-67J Mini-ITX motherboard x 1
Cable Kit:
Other Accessories:
Drivers CD (including User’s Manual) x 1
SATA Cable x 2
(OALSATA-L)
DVI Module With DVI Cable x 1
(BADPDVI-A + OALDVI-DF13)
I/O Shield x 1
(OPLATE-67A)
USB Cable x 1
(OALUSBA-1)
COM Cable x 1
(OAL1S) (Option)

LV-67J User’s Manual
4
Index
Chapter1 <Introduction>.....................................................................7
1.1 <Product Overview> .............................................................................................7
1.2 <Product Specification> ........................................................................................8
1.3 <Block Diagram> ................................................................................................10
1.4 <Mechanical Drawing > ......................................................................................11
Chapter 2 <Hardware Setup>.........................................................12
2.1<Connector Location>..........................................................................................12
2.2 <Jumper Reference>..........................................................................................13
2.3 <Connector Reference>......................................................................................14
2.3.1 <Internal Connectors> ..............................................................14
2.3.2 <External Connectors> .............................................................14
2.4 <CPU and Memory Setup>.................................................................................15
2.4.1 <CPU installation>...................................................................15
2.4.2 <Memory installation>..............................................................16
2.5 <CMOS Setup>...................................................................................................17
2.6 <Serial ATA installation>......................................................................................18
2.7 <LAN installation>...............................................................................................19
2.8 <Onboard Display Interface>..............................................................................20
2.8.1 <Analog Display>....................................................................20
2.8.2 <DVI Display >.......................................................................21
2.9 <Audio Installation> ............................................................................................22
2.10 <GPIO and SMBUS interface> .........................................................................24
2.11 <USB Installation>.............................................................................................25
2.12 <Power and Fan Installation> ...........................................................................27
2.13 <Serial Port>.....................................................................................................29
2.14 <Switch and Indicator> .....................................................................................32
Chapter 3 <System Configuration>...........................................34
3.1 <SATA configuration>..........................................................................................34
3.2 <SATA RAID Configuration>...............................................................................35

LV-67J User’s Manual
5
3.3 <Audio Configuration> ........................................................................................37
3.4 <Display Properties Setting>...............................................................................38
Chapter 4 <BIOS Setup>....................................................................40
Appendix A <I/O Port Pin Assignment>.................................42
A.1 <Serial ATA Port>................................................................................................42
A.2 <IrDA Port>.........................................................................................................42
A.3 <Serial Port>.......................................................................................................43
A.4 <VGA Port> ........................................................................................................43
A.5 <LAN Port>.........................................................................................................43
Appendix C <Programming GPIO’s>........................................44
Appendix D <Watch Dog timer Setting >...............................45
Contact Information..............................................................................46

LV-67J User’s Manual
6
(This Page is Left for Blank)

LV-67J User’s Manual
7
Chapter1 <Introduction>
1.1 <Product Overview>
LV-67J is the motherboard with last Intel desktop technology with Mini-ITX form factor.
Based on Intel®Q77, the board 3th Generation I3/I5/I7®processor 1155-pin socket, DDR3
memory socket, Intel®HD Graphic technology, Serial ATA II with RAID function for a
powerful desktop system.
Intel®Ivy Bridge processor
The Intel 3th Generation I3/I5/I7®
processor now comes with a new form factor with
1155-pin FCLGApackage, for 1066/1333MHz front-side-bus, 12MB L2 cache, for 65nm and
45nm manufacturing technology, the PLGA processor without pin header on solder side can
make user installing the processor on the socket easier.
Intel®Q77 PCH chipset
The Intel Q77 integrates DDR3 1066/1333MHz for memory, and HD Graphic technology for
new graphic engine. The Q77 integrates with up to 8 USB2.0 interfaces, and serial ATA II
interface with RAID function.
Flexible Extension Interface
The board provides one mini-PCIE socket, one mini-PCI socket and one PCIE X16 slot.

LV-67J User’s Manual
8
1.2 <Product Specification>
General Specification
Form Factor Mini-ITX motherboard
CPU Intel® I3/I5/I7 ® processor
With LGA1155 socket
Package type: FCLGA 1155
Memory 2 x 240-pin DDR3 1066/1333MHz SDRAM up to 16GB
Unbufferred, none-ECC memory supported only
Chipset Intel® BD82Q77 PCH
BIOS Phoenix 64Mb SPI flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer with 1 ~ 255 sec./min.
of timeout value
Real Time Clock Chipset built-in RTC with lithium battery
Serial ATAII Intel® Q77 PCH integrates 2 Serial ATA II interface& 2 Serial ATA IIl
RAID 0, 1,5,10 Intel Matrix Storage Technology supported
Multi-I/O Port
Chipset Intel® Q77 PCH with Winbond® W83627DHG-P Controller
Serial Port Three RS-232 and one RS232/422/485 serial ports
USB Port Four Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
Four USB 3.0 ports with 4.8Gbps of transfer rete
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel
GPIO One 12-pin Digital I/O connector with 8-bit programmable I/O
Interface
Smart Fan One CPU fan connectors for fan speed controllable
VGA Display Interface
Chipset Intel® Clear Video integrated HD Graphics Technology
Frame Buffer Up to 1.7GB shared with system memory
Display Type CRT, LCD monitor with analog display
Onboard DVI interface
Connector External DB15 female connector on rear I/O panel
Onboard 20-pin DVI Connector

LV-67J User’s Manual
9
Ethernet Interface
Controller One Intel 82574L Gigabit Ethernet controller
One Intel® integrated Q77with Intel 82579LM Gigabit Ethernet
Type Triple speed 10/100/1000Base-T
Auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector Two External RJ45 connectors with LED on rear I/O panel
Audio Interface
Chipset Intel® integrated Q77with Realtek ALC888HD Audio
Intel High Definition Audio compliance
Interface 2 channels sound output
Connector External 3 phone jack for 2 channel audio on rear I/O panel
External SPDIF connector on rear I/O panel
Internal 10-pin header for line-out, MIC-in, 4-pin header for CD-IN
Power and Environment
Power
Requirement Standard ATX 24-pin (20-pin is compatible) power supply Additional +12V 4-pin power connector
Dimension 170 (L) x 170 (H) mm
Temperature Operating within 0 ~ 60P
O
p
C (32 ~ 140P
O
p
F)
Storage within –20 ~ 85P
O
p
C (-4 ~ 185P
O
p
F)
Ordering Code
LV-67J Onboard VGA, DVI, 2 x Gigabit LAN, 4 x USB2.0, 4 x USB3.0, 4 x
serial Port, 4 x SATA, 1 x IrDA, Realtek HD Audio, Mini-PCI, PCIE
Mini card, PCIE x16.
The specifications may be different as the actual production.

LV-67J User’s Manual
10
1.3 <Block Diagram>
Intel Q77
2 x 240-pin DDR3
1066/1333MHz up
to 16GB
PCI bus
Mini-PCI slot
2 x Serial ports
8-bit GPIO
4 x USB2.0 ports
4 x USB3.0 ports
HD Audio
2 x Serial ATAII ports
2 x Serial ATAlll
p
orts
Intel 82574L x 1
Intel 82579LM x
IrDA
BIOS
SPI
COM3/4
Mini-PCI card slot/PCI-E x16

LV-67J User’s Manual
11
1.4 <Mechanical Drawing >

LV-67J User’s Manual
12
PS2
Chapter 2 <Hardware Setup>
2.1<Connector Location>
CN_12
V
CPUFAN
CN_DIO
SYSFAN
JFRNT
CN_USB1/2
CN_AUDIO
SPDIF CDIN
CDIN
CN_I
R
A
TX
COM1 + CRTUSB_RJ45_1/2
A
udio
DDRIIIA/B
S_ATA1~4
COM3+COM4
CN_DVI
CN_SMBUS
CN_COM2

LV-67J User’s Manual
Connector Reference 13
JAT
1
3
2.2 <Jumper Reference>
Jumper Function
JRTC CMOS Operating/Clear Setting
JP1 COM1 signal mode switch (For Pin-1 & Pin-9)
JP2 COM2 signal mode switch (For Pin-1 & Pin-9)
JAT Power mode select
JCSEL1
JCSEL2 CN_COM2 RS-232 RS422 RS485 Setting
CN_IR IrDA Setting
JVUSB USB Voltage Setting
Jumper: JVUSB
Type: Onboard 3-pin jumper
Jumper: JAT
Type: Onboard 3-pin jumper
JAT Mode
1-2 +5V
2-3 +5V_SB
Default setting
JAT Mode
1-2 AT Power mode
2-3 ATX Power mode
Default setting
JAT
JVUSB
1
3
JVUSB

LV-67J User’s Manual
14
2.3 <Connector Reference>
2.3.1 <Internal Connectors>
Connector Function Remark
CPU LGA1155 CPU socket
DDRIIIA/B 240 –pin DDR3 SDRAM DIMM socket
S_ATAII1/2/3/4/ 7-pin Serial ATA II connector
ATX 24-pin power supply connector
CN_12V 4-pin +12V additional power supply connector
CN_AUDIO 5 x 2-pin audio connector
CDIN 4-pin CD-ROM audio input connector
CN_DIO 6 x 2-pin digital I/O connector
CN_USB1/2 10-pin USB connector
CPUFAN 4-pin CPU cooler fan connector
SYSFAN 3-pin system cooler fan connector
CN_IR 5-pin IrDA connector
CN_SMBUS 5-pin SMBUS connector
JFRNT 14-pin front panel switch/indicator connector
PCIE_16X PCI Express 16x slot
Mini-PCI 1 x Mini-PCI socket
CN_DVI1 26 Pin connector
CN_COM2 5 x 2-pin com connector
MINI_CARD 1 x 52-pin PCI Express mini card
2.3.2 <External Connectors>
Connector Function Remark
PS2 PS/2 Keyboard/Mouse connector
CRT+COM1 DB15 VGA + Serial port connector
USB_RJ45_1/2 Dual USB 3.0 and one RJ45 LAN Port
COM 3/4 Serial port connector
AUDIO Audio connectors
SPDIF SPDIF digital audio output connector

LV-67J User’s Manual
15
2.4 <CPU and Memory Setup>
2.4.1 <CPU installation>
LV-67J has a LGA1155 CPU socket onboard; please check following steps to install the
processor properly.
Attention If LV-67J need RMA please Keep CPU socket cover on the CPU Socket.
Warning If CPU Socket internal Pin damage We could not provide warranty.
Intel®I3/I5/I7® processor
Package type: 1155 pin FCLGA
FSB:1066/1333MHz
1. Lift this bar
2. Uncover this plate
Checked point
3. Place the CPU on the top o
f
the
p
ins
3. Cover this plate
4. Lock this bar
Notice: Please place the CPU on the pins tenderl
y
to avoid bendin
g
the pins

LV-67J User’s Manual
16
2.4.2 <Memory installation>
LV-67J has two 240-pin DDR3 DIMM support up to 16GB of memory capacity. The memory
frequency supports 1066/1333 MHz. Only Non-ECC memory is supported.
DDRIII A/B
96-pin
144-pin
Please check the pin number to match the socket side well
before installing memory module.

LV-67J User’s Manual
17
2.5 <CMOS Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
JRTC
3
1

LV-67J User’s Manual
18
2.6 <Serial ATA installation>
LV-67J has Two Serial ATA II & Two Serial ATA III interfaces with RAID function, the transfer
rate of the Serial ATA II can be up to 300MB/s & Serial ATAIII can be up to 600MB/s. Please
go to http://www.serialata.org/ for more about Serial ATA technology information. Based on
Intel® PCH, it supports Intel®Matrix Storage Technology with combination of RAID 0,1,5
and 10. The main features of RAID on Intel® Q67 PCH are listed below:
1. Supports for up to RAID volumes on a single, two-hard drive RAID array.
2. Supports for two, two-hard drive RAID arrays on any of six Serial ATA ports.
3. Supports for Serial ATAATAPI devices.
4. Supports for RAID spares and automatic rebuild.
5. Supports on RAID arrays, including NCQ and native hot plug.
For more information please visit Intel’s official website.
For more about the system setup for Serial ATA, please check the chapter of SATA
configuration.
SATA1/2/3/4

LV-67J User’s Manual
LAN Installation 19
2.7 <LAN installation>
The board integrates with one Intel 82574L Gigabit Ethernet controllers and One Intel®
integrated Q77with Intel 82579LM Gigabit Ethernet, as the PCI Express bus. The Intel
82574L supports triple speed of 10/100/1000Base-T, with IEEE802.3 compliance and
Wake-On-LAN supported.
LAN2LAN1

LV-67J User’s Manual
20
2.8 <Onboard Display Interface>
Based on Intel Q77 chipset with built-in graphics, the board provides one DB15 Connector
on real external I/O port and the board also provides 20-pin DVI interface
Notice: When you install any PCI Graphic card, the onboard graphics would be disabled
automatically.
2.8.1 <Analog Display>
Please connect your CRT or LCD monitor with DB15 male connector to the onboard DB15
female connector on rear I/O port.
CRT