Commodore 1670 Assembly instructions

The CommodoreConnection.
' ^ fT f'* i& ^ *" < ? * % ^ ^$ ^& $ ? ''? ?
W ä M ^ M
M3fc^ f e 8 & 4 & « $ ^M«W M»»«» S t e W ^ f t^ ^
Ä^^^^i^^^^^^ä^^lM & m % m m m
Commodore
Software
Showcase
People 1 Commodore
ConnectionIlnformation
I Network
Just
For
Fun
Learning
Center
Customer
Service
Center
News &
Information
The Mall

GETTING STARTED
W ith Your New Modem
To set up your Commodore Modem/1200 (Model
1670) and connect to Q-Link, follow these
instructions:
1. Make sure your computer, disk drive and monitor
are turned OFF.
2. Insert one end of the telephone cord provided with
your Modem/1200 into your telephone wall jack.
Insert the other into the modem jack labeled LINE
at the back of the modem.
3. If you intend to leave your Modem/1200 permanently
connected to the telephone line, but would like to
continue to use your telephone when the modem is
not in use, plug your telephone’s connector into the
modem jack marked PHONE.
4. Insert the modem into the User Port (see diagram).
" ' ; 1 " * M M . ........................... .................................. \
r x commodore
/
Expansion Port /
User Port

5. Check that the dip switches near the jacks on the
back of the modem are in the following positions.
» ■ ^ ^ ^ ^ “ “ “ ■ ^ ^ ^ " S
BflBB
1 2 3 4
(DOWN)
6. Put the Q* *Link
command template over
your function keys.
7- If you own a Commodore 64:
• Turn on the power to your computer, disk drive
and monitor.
• Insert the Q-Link program disk into your disk
drive.
• When you see READY on your screen, type:
LOAD“ * ”,8,1 (and press RETURN).
If you own a Commodore 128:
• Turn on your monitor and disk drive.
• Make sure your computer is turned off.
• Insert the Q-Link program disk into your disk
drive.
• Turn on your computer.
• Your disk drive will automatically load Q-Link (no
typing is needed).
8. When asked to identify your modem type, select
Commodore 1670 and press F1.
9. When asked for your phone type, select PULSE and
press F1. If you have a touch-tone phone, select
TONE instead.
10. When asked for your local access number, check
the listing of numbers in your
enter the access number for your city, and press F1.
Then select SIGN ON TO Q-LINK and press F1.
11. Once you’re connected to Q-Link, you should follow
the instructions in your Members’ Guide.
Q-l5-oi

The Commodore Connection.
8619Westwood Center Drive • Vienna, Virginia 22180
703/448^700
10000920200
(In Canada call 7030830788)
Q-15-01
# 319899-02
# QL-33