Comprehensive CDA-HD220EK User manual

CDA-HD220EK
HDMI 1 x 2 Splitter with HDCP 2.2 - 4K@60 (YUV420)
User manual

Introduction
This 1 by 2 HDMI UHD Splitter with HDCP 2.2 is an advanced
solution for splitting a single HDMI input to two HDMI
outputs. It provides high performance audio and video
output through HDMI cables up to 4K2K@60Hz (YUV420)
resolution and is capable of receiving and transmitting up to
9Gbps of bandwidth with no data loss. Supporting the latest
features you can be assured of reliable and high quality
HDMI distribution.
Package
1Pcs
UHD 1x2 HDMI Splitter---------------------------------
5V/1A DC power adaptor-------------------------------
1Pcs

User manual----------------------------------------------1pcs
Feature
Compliant with HDMI2.0, HDCP2.2 and DVI 1.0;
Support video format up to 4k2k@30Hz with
24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2,and up to
4k2k@60Hz with 12bit YCBCR 4:2:0;
Support 3D frame sequential video format up to
1080p@60Hz;
Support high resolution VESA mode video format
up to QSXGA@60Hz;
Support LPCM 7.1CH, Dolby TrueHD, and DTS-HD
Master Audio;

Support smart EDID control;
Specification
Video Bandwidth
300MHz/10.2 Gbps
Input Ports
Output Ports
1 x HDMI (Female type)
Output Resolution
2 x HDMI (Female type)
480i ~1080p50/60, 4Kx2K@24/30,
4k2k@60Hz with 12bit YCBCR 4:2:0,
VGA~UXGA

ESD Protection
Human Body model:
±8 kV (air-gap discharge)
Power Supply
±4 kV (contact discharge)
Dimensions
5 V/1A DC
Weight
56 mm (W) × 96 mm (D) × 17 mm (H)
Chassis Material
100 g
Silkscreen Color
Metal
Operating Temperature
Black
Storage Temperature
0 °C~40 °C/ 32 °F~104 °F
−20 °C ~ 60 °C/−4 °F ~140 °F

Relative Humidity
20~90 % RH (non-condensing)
Power Consumption 1.5W
Connect and Operate
Connect the signal sources such as Blu-Ray Player, Play Station
3, satellite receivers and computers equipped with HDMI output
interfaces with a short high-speed HDMI cable to the HDMI
Splitter input.
Connect the HDMI outputs from the HDMI Splitter to high-
definition display devices such as HD-LCD, HD-DLP and HD
projectors with HDMI input interfaces. Use high-speed HDMI
cables that are recommended for the distances that are required
for each connection.

The Splitter is powered by an external power supply which is
included. Connect power first to the source, then to the Splitter
and then to each HD TV or projector.
1.POWER LED: This blue LED illuminated when the
device is connected with power supply.
2.IN LED: This blue LED illuminated when the Source
connect to the device.
3.OUT LED: These blue LEDs will light up to indicate

which HDMI outputs are connected to an active
TV/display/monitor.
4.EDID STD: When in 'STD' mode, the unit will use its own
built-in EDID settings. In this mode, the video output will be set
to 1080p@60Hz and the audio output at LPCM 2CH Stereo. Use
this mode if there are display problems in TV Mode.
5.EDID TV: When in 'TV' mode, the unit will read the EDID
settings of the display device connected to HDMI OUT 1. If it
detects a 4K2K capable EDID setting it will transmit the signal in
that format to all outputs. If no 4K2K capable EDID is detected
then the unit will output

the best resolution that all displays can support. 1.HDMI
OUT 1~2: Connect each of the HDMI outputs to an HDMI display
for simultaneous HDMI distribution, or cascade the output to
another transmitter to extend the operating distance.
2.HDMI IN: Connect the input port to the HDMI or DVI output of
your source device such as a DVD player or set-top box with an
HDMI cable.

3.DC 5V: Plug the 5V DC power supply into the unit and
connected the adaptor to an AC outlet.
Connection Diagram