Conair LWD1C User manual

REPLACEMENT PART:
This shaver uses the following replacement
parts, which can be ordered directly from
Conair by calling customer service at
1-800-3-CONAIR.
CSP21 Replacement Foil and Cutter
SERVICE CENTRE
CONAIR CONSUMER PRODUCTS INC.
100 Conair Parkway
Woodbridge, ON L4H 0L2
©2013 Conair Consumer Products Inc.
For more information on any Conair product
call: 1-800-472-7606
Visit our Web site:
www.conaircanada.ca
Consumer Call Centre E-mail:
[e-mail]
12CN137997
IB-11931
Have a Question?
Please do not return this product
to the retailer.
Call Us First!
Our customer service and product experts
are ready to answer ALL your questions.
Please call our TOLL-FREE
customer service number at:
1-800-472-7606
or visit us online at
www.conaircanada.ca
Twin Foil Shaver
INSTRUCTIONS FOR CARE AND USE
MODEL LWD1C
BATTERY OPERATED

SHAVING YOUR UNDERARMS
1. Prepare your underarms for wet or dry
shaving. (Be sure that your skin is clean and
free of deodorant).
2. Turn the shaver on.
3. Lift your arm until the skin under the arm
stretches slightly.
4. Use the trimmer portion first to remove any
long hair, stroking trimmer against the direction
of hair growth.
5. Hold the shaver so that it is in full contact
with your skin, and shave with gentle strokes.
6. It is important to press lightly. Pressing too
hard may lead to skin irritation.
7. When finished shaving, turn the shaver off.
Important: After several uses, you will be able
to determine the optimum shaving method for
your underarms.
HOW TO CLEAN YOUR SHAVER
1. Make sure unit is in the “OFF” position
before cleaning your shaver.
2. Hold shaver head and lift up from the back,
(FIG.1) then press foil frame release buttons on
each side and lift up (the cutter is now in view).
Be careful not to push on the foils. They are
delicate and can easily be damaged.
Press Here
FIG. 1
Press Here
3. Rinse the shaver cutter and foil frame under
running water or in a sink. Do not use hot water.
Use only warm or cold water.
4. After wet cleaning, allow the foil frame and
cutters to air-dry before closing foil frame and
shaver head. Replace shaver head back onto the
shaver until it clicks into place. Wipe the surface
of the main unit with a dry towel. Do not dry the
foil area. Let the shaving head air-dry.
5. The cutter can also be cleaned with a
cleaning brush.
Transparent cover
Pop-up button

LIMITED TWO YEAR WARRANTY
Conair will repair or replace (at our option) your unit
free of charge for 24 months from the date of
purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective
product to the service center listed below that is nearest
you, together with your purchase receipt and $3.00 for
postage and handling. California residents need only
provide proof of purchase and should call 1-800-366-
0937 for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be 24 months
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR
LIABILITIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE 24 MONTH
DURATION OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may
not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of
special, incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights, and you
may also have other rights, which vary from state to
state.
For shaving tips and information on Conair
appliances call: 1-800-3-CONAIR or visit us on
the web at www.conair.com
REPLACING THE POP-UP
TRIMMER ASSEMBLY
Note: we do not recommend replacing the
trimmer assembly yourself. Take or send the
shaver to a Conair service center because
this requires a special tool for replacement.
For most users, this trimmer will stay sharp for
as long as you own your shaver.

12. Do not mix old and new batteries. Do not
mix alkaline, standard (Carbon-Zinc), or
rechargeable (Nickel cadmium or Nickel
Metal Hydride) batteries.
CAUTION
Do not immerse any part of the unit in water or
other liquid.
The outer foils and cutters are delicate and
must be handled very carefully.
BEFORE SHAVING
1. Before wet shaving, you may wish to
prepare your legs and underarms with
shaving cream or soap. If a soapy lather is
applied to the skin, the shaver will glide
smoothly over the skin and clean away oil
residue while at the same time removing
hair. Caution: DO NOT use shaving gels, as
these products can clog your shaver foils.
2. When dry shaving, be certain that your
skin is clean. If you have sensitive skin, you
may want to apply talcum powder before and
after you shave.
3. Clean your shaver after each use. This will
insure the best performance. (Please refer to
“How to Clean Your Shaver” section for
further instructions.)
INSTRUCTIONS FOR USE
1. Slide the main switch up to the ON position.
2. After each shave, switch the unit off and clean
shaver head.
SHAVING YOUR LEGS/BIKINI AREA
NOTE: Pushing the shaver against the skin too
hard will not allow the hairs to enter the foils and
be cut. Experience will show just the right
pressing to use to maximize performance.
1. Prepare your legs for wet or dry shaving.
2. Turn shaver on.
3. Shave with smooth, steady strokes up and
down your skin.
4. Keep the full shaving head in contact with
your skin.
5. For best results, shave against the direction of
hair growth.
6. The shaver has a bikini pop-up trimmer for
your complete shaving needs. To trim the bikini
area, use the handy pop-up feature to easily see
what you are trimming.
7. When you finish shaving, turn the shaver off.
Important: After several uses, you will be able to
determine the optimum shaving method for your
legs and bikini area.

REPLACING THE
FOIL FRAME & CUTTER
Replace the foil frame when you find you
have to push harder on the shaver to get a
close shave, or if you have to go over your
leg area more often to get a smooth result. It
is also time to replace the foils if you
experience skin irritation. Replacement time
will depend on how often you use your
shaver and how quickly your hair grows.
Caution: Never replace the cutters without
replacing the foils as well.
3. Hold the new cutters firmly on the sides and
guide them gently into the inner cutter mount
one side at a time until they lock into place.
(FIG. 4)
FIG. 2
Lift
Press Here
Press Here
spring
FIG. 3
Hold Here
Hold Here
spring
1. Remove the foil frame. (see FIG. 2)
2. Push one side of the cutters to unlock it
and take out. (see FIG. 3) Be careful not to
lose the small spring as it will be needed with
the new cutters.
4. Press firmly until the cutter snaps into place.
5. Replace the foil frame. (FIG. 5)
FIG. 4
FIG. 5

OPERATING
INSTRUCTIONS
IMPORTANT
This shaver has been engineered to give you
a clean, close, smooth shave. It requires 2
AAA batteries (not included). We recommend
using longer lasting alkaline batteries in your
shaver. If you are not going to use your
shaver for a long period of time or if the
batteries are dead, remove or replace the
batteries from the unit.
Use your shaver exclusively for three to four
weeks so that your legs and underarms
adjust to the shaver. At first, your shave
might not be as close as you expect.
However, this is normal. It takes time for your
skin and hair to adjust to the new procedure
and for you to learn how the effectively use
the shaver. Caution: Most blade users will
push too hard and therefore not get a
satisfactory shave. You must press gently so
the hair can get into the holes of the foil
pressing too hard makes the hair flat. Please
be patient; use your shaver 10 to 12 times
before you judge its performance.
FOR HOUSEHOLD
USE ONLY
OPERATING INSTRUCTIONS
1. Remove the battery compartment cover by
pushing in and down toward the bottom of the
shaver.
2. Align the two AAA batteries with the positive
and negative positions indicated inside the
battery compartment. Being careful not to
bend the clips, insert the negative end of each
battery first so it will slip easily into place.
3. Return the battery cover to its original
position by pushing it in and up until you hear
a small click as it locks into place.
4. To use your shaver, remove the transparent
cover and push ON/OFF switch upwards to
the ON position.
5. After you finish using your shaver, push
down on the ON/OFF switch to turn the
shaver off.
6. Ensure the batteries are installed correctly
with regard to polarity (+ and -).
7. Remove the batteries if the batteries are no
longer functional or if the shaver is left
unused for an extended period of time.
8. Clean the battery contacts and also those
of the device prior to battery installation.
9. Remove used batteries promptly.
10. Always purchase the correct size and grade
of battery most suitable for the intended use.
11. Replace all batteries of a set at the same
time.

6. If the body of the shaver becomes dirty, wipe
off with a damp cloth and mild detergent or soap.
Never use thinners, other solvents, or any harsh
cleaners.
7. Once dried, carefully place the protective cap on.
CAUTION
1. When shaking off excess water, hold the
main unit firmly to prevent releasing the head
assembly or dropping the unit.
2. Do not use a dryer or heater to dry the
shaver. This may result in malfunction or
damage to the shaver.

Congratulations on the purchase of your new
ladies dual foil shaver. For maximum satisfaction
when using this quality product, please take a
minute to read the following operating and care
instructions. Thank you for choosing Conair, the
#1 brand in personal care appliances.
SAVE THESE
INSTRUCTIONS
WARNING
1. Women whose skin is sensitive to cosmetics
or easily irritated by shaving, or who suffer from
a skin allergy, should test one section of the leg
or arm before using the shaver.
2. The foils are thin and precisely finished
pieces. Do not press hard against the
foils, or drop foils. A warped or distorted
foil will produce poor shaving results.
Also a damaged foil may cause skin
injury. A damaged foil should be replaced
immediately.
3. When cleaning, use cold or warm water.
Do not use hot water, sea water, or cleaners,
as they can cause damage to the waterproof
seals.
4. Rinse the shaver head only, do not
submerge the entire unit in water.
5. To prevent possible damage to the foils and
the cutter, women who use underarm deodorant
must thoroughly clean and air-dry the foil and
cutter after each use. Failure to do this may
result in corrosion of the cutters.