
1. Wet your face and apply sufficient
cleanser to the wet brush head.
2. Turn the brush on and select desired
speed. We recommend starting on LOW
and increasing speed to HIGH, depending
on how your skin reacts to treatment.
3. Do not press the brush hard against
your skin as it will reduce the motion
and effectiveness. Keep the brush in
light contact and flush against the skin.
4. Move the brush in a slow circular motion
around your face. Let the sonic oscillation
do the cleansing. NOTE: Do not apply
treatment close to the eyes to avoid risk
of injury.
5. When finished, rinse face with water and
dry your skin with a towel.
6. After each use, rinse brush head and wipe
the brush handle with a damp cloth to
remove any oils or cleansers used during
treatment. Be sure you keep the charging
contacts on the sonic brush clean to keep
the unit charging properly.
FACIAL CLEANSING ZONES
6
10 SECONDS AT EACH ZONE
1 CYCLE = 60 SECONDS
Getting Started
3 speeds •60-second timer •Charging stand
renew •refresh •revive
true glow
Sonic Facial Brush for professional results
®
SENSITIVITY AND CAUTIONS
SPECIAL CAUTIONS FOR DELICATE AREAS
The True Glow®Sonic Facial Brush is a facial
cleansing device that is intended to help you get
clean and healthy-looking skin. The True Glow®
Sonic Facial Brush is not a medical device and
is not intended to be used to treat any medical
conditions, such as acne.
If you are under a doctor’s care for any skin
condition or if you think you have very sensitive
skin, please consult your physician before use.
If rash or irritation occurs, stop use.
We recommend not sharing the brush heads;
each user should have their own brush head.
Do not use with exfoliation creams that contain
rough or jagged particles.