Congatec COM Express conga-TC570r User manual

COM Express™ conga-TC570r
11th Generation Intel®Core™ i7, i5, i3 and Celeron® Single Chip UP3 Processors (Soldered-Down Memory)
User’s Guide
Revision 0.1 (Preliminary)

Copyright © 2022 congatec GmbH TCTOm01 2/70
Revision History
Revision Date (yyyy-mm-dd) Author Changes
0.1 2022-03-15 AEM •Preliminary release

Copyright © 2022 congatec GmbH TCTOm01 3/70
Preface
This user’s guide provides information about the components, features, connectors and system resources available on the conga-TC570r. It is
one of three documents that should be referred to when designing a COM Express™ application. The other reference documents that should
be used include the following:
COM Express™Design Guide
COM Express™Specification
The links to these documents can be found on the congatec GmbH website at www.congatec.com
Software Licenses
Notice Regarding Open Source Software
The congatec products contain Open Source software that has been released by programmers under specific licensing requirements such as
the “General Public License“ (GPL) Version 2 or 3, the “Lesser General Public License“ (LGPL), the “ApacheLicense“ or similar licenses.
You can find the specific details at https://www.congatec.com/en/licenses/. Search for the revision of the BIOS/UEFI or Board Controller
Software (as shown in the POST screen or BIOS setup) to get the complete product related license information. To the extent that any
accompanying material such as instruction manuals, handbooks etc. contain copyright notices, conditions of use or licensing requirements that
contradict any applicable Open Source license, these conditions are inapplicable.
The use and distribution of any Open Source software contained in the product is exclusively governed by the respective Open Source
license. The Open Source software is provided by its programmers without ANY WARRANTY, whether implied or expressed, of any fitness for
a particular purpose, and the programmers DECLINE ALL LIABILITY for damages, direct or indirect, that result from the use of this software.
OEM/ CGUTL BIOS
BIOS/UEFI modified by customer via the congatec System Utility (CGUTL) is subject to the same license as the BIOS/UEFI it is based on. You
can find the specific details at https://www.congatec.com/en/licenses/.

Copyright © 2022 congatec GmbH TCTOm01 4/70
Disclaimer
The information contained within this user’s guide, including but not limited to any product specification, is subject to change without notice.
congatec GmbH provides no warranty with regard to this user’s guide or any other information contained herein and hereby expressly disclaims
any implied warranties of merchantability or fitness for any particular purpose with regard to any of the foregoing. congatec GmbH assumes
no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for
discrepancies between the product and the user’s guide. In no event shall congatec GmbH be liable for any incidental, consequential, special,
or exemplary damages, whether based on tort, contract or otherwise, arising out of or in connection with this user’s guide or any other
information contained herein or the use thereof.
Intended Audience
This user’s guide is intended for technically qualified personnel. It is not intended for general audiences.
Lead-Free Designs (RoHS)
All congatec GmbH designs are completely RoHS compliant.
Electrostatic Sensitive Device
All congatec GmbH products are electrostatic sensitive devices. They are enclosed in static shielding bags, and shipped enclosed in secondary
packaging (protective packaging). The secondary packaging does not provide electrostatic protection.
Do not remove the device from the static shielding bag or handle it, except at an electrostatic-free workstation. Also, do not ship or store
electronic devices near strong electrostatic, electromagnetic, magnetic, or radioactive fields unless the device is contained within its original
packaging. Be aware that failure to comply with these guidelines will void the congatec GmbH Limited Warranty.

Copyright © 2022 congatec GmbH TCTOm01 5/70
Symbols
The following symbols are used in this user’s guide:
Warning
Warnings indicate conditions that, if not observed, can cause personal injury.
Caution
Cautions warn the user about how to prevent damage to hardware or loss of data.
Note
Notes call attention to important information that should be observed.
Copyright Notice
Copyright © 2022 congatec GmbH. All rights reserved. All text, pictures and graphics are protected by copyrights. No copying is permitted
without written permission from congatec GmbH.
congatec GmbH has made every attempt to ensure that the information in this document is accurate yet the information contained within is
supplied “as-is”.
Trademarks
Product names, logos, brands, and other trademarks featured or referred to within this user’s guide, or the congatec website, are the property
of their respective trademark holders. These trademark holders are not affiliated with congatec GmbH, our products, or our website.

Copyright © 2022 congatec GmbH TCTOm01 6/70
Warranty
congatec GmbH makes no representation, warranty or guaranty, express or implied regarding the products except its standard form of limited
warranty (“Limited Warranty”) per the terms and conditions of the congatec entity, which the product is delivered from. These terms and
conditions can be downloaded from www.congatec.com. congatec GmbH may in its sole discretion modify its Limited Warranty at any time
and from time to time.
The products may include software. Use of the software is subject to the terms and conditions set out in the respective owner’s license
agreements, which are available at www.congatec.com and/or upon request.
Beginning on the date of shipment to its direct customer and continuing for the published warranty period, congatec GmbH represents that
the products are new and warrants that each product failing to function properly under normal use, due to a defect in materials or workmanship
or due to non conformance to the agreed upon specifications, will be repaired or exchanged, at congatec’s option and expense.
Customer will obtain a Return Material Authorization (“RMA”) number from congatec GmbH prior to returning the non conforming product
freight prepaid. congatec GmbH will pay for transporting the repaired or exchanged product to the customer.
Repaired, replaced or exchanged product will be warranted for the repair warranty period in effect as of the date the repaired, exchanged
or replaced product is shipped by congatec, or the remainder of the original warranty, whichever is longer. This Limited Warranty extends to
congatec’s direct customer only and is not assignable or transferable.
Except as set forth in writing in the Limited Warranty, congatec makes no performance representations, warranties, or guarantees, either
express or implied, oral or written, with respect to the products, including without limitation any implied warranty (a) of merchantability, (b) of
fitness for a particular purpose, or (c) arising from course of performance, course of dealing, or usage of trade.
congatec GmbH shall in no event be liable to the end user for collateral or consequential damages of any kind. congatec shall not otherwise
be liable for loss, damage or expense directly or indirectly arising from the use of the product or from any other cause. The sole and exclusive
remedy against congatec, whether a claim sound in contract, warranty, tort or any other legal theory, shall be repair or replacement of the
product only.
Certification
congatec GmbH is certified to DIN EN ISO 9001 standard.
C
E
R
T
I
F
I
C
A
T
I
O
N
I
S
O
9
0
0
1
TM

Copyright © 2022 congatec GmbH TCTOm01 7/70
Technical Support
congatec GmbH technicians and engineers are committed to providing the best possible technical support for our customers so that our
products can be easily used and implemented. We request that you first visit our website at www.congatec.com for the latest documentation,
utilities and drivers, which have been made available to assist you. If you still require assistance after visiting our website then contact our
technical support department by email at [email protected]
Terminology
Term Description
EU Execution Unit
GB Gigabyte
GHz Gigahertz
kB Kilobyte
MB Megabyte
Mbit Megabit
kHz Kilohertz
MHz Megahertz
TDP Thermal Design Power
PCIe PCI Express
SATA Serial ATA
PEG PCI Express Graphics
PCH Platform Controller Hub
eDP Embedded DisplayPort
DDI Digital Display Interface
HDA High Definition Audio
N.C Not connected
N.A Not available
TBD To be determined
TCC Time Coordinated Computing
TSN Time Sensitive Networking

Copyright © 2022 congatec GmbH TCTOm01 8/70
Contents
1 Introduction ............................................................................. 11
1.1 COM Express™ Concept......................................................... 11
1.2 Options Information................................................................. 12
2 Specifications........................................................................... 13
2.1 Feature List .............................................................................. 13
2.2 Supported Operating Systems ................................................ 14
2.3 Mechanical Dimensions ........................................................... 14
2.4 Supply Voltage Standard Power .............................................. 15
2.4.1 Electrical Characteristics .......................................................... 15
2.4.2 Rise Time ................................................................................. 15
2.5 Power Consumption ................................................................ 15
2.6 Supply Voltage Battery Power ................................................. 17
2.7 Environmental Specifications................................................... 17
3 Block Diagram.......................................................................... 18
4 Cooling Solutions..................................................................... 19
4.1 CSA Dimensions ...................................................................... 20
4.2 CSP Dimensions....................................................................... 21
4.3 HSP Dimensions....................................................................... 22
4.3.2.1 Heatspreader Thermal Imagery ............................................... 23
5 Connector Rows....................................................................... 24
5.1 Primary and Secondary Connector Rows................................. 24
5.1.1 PCI Express™........................................................................... 24
5.1.2 PCI Express Graphics (PEG) ..................................................... 24
5.1.3 Display Interfaces..................................................................... 25
5.1.3.1 DP++ ....................................................................................... 25
5.1.3.2 LVDS/eDP................................................................................. 26
5.1.3.3 VGA.......................................................................................... 26
5.1.4 SATA ........................................................................................ 27
5.1.5 USB .......................................................................................... 27
5.1.6 Gigabit Ethernet ..................................................................... 28
5.1.7 High Definition Audio ............................................................. 29
5.1.8 LPC Bus.................................................................................... 29
5.1.9 I²C Bus ..................................................................................... 29
5.1.10 GPIOs....................................................................................... 29
5.1.11 General Purpose Serial Interface ............................................. 29
5.1.12 Power Control .......................................................................... 30
5.1.13 Power Management................................................................. 33
6 Additional Features.................................................................. 34
6.1 congatec Board Controller (cBC) ............................................. 34
6.1.1 Board Information.................................................................... 34
6.1.2 General Purpose Input/Output................................................ 34
6.1.3 Watchdog ................................................................................ 34
6.1.4 I2C Bus...................................................................................... 34
6.1.5 Power Loss Control.................................................................. 35
6.1.6 Fan Control .............................................................................. 35
6.1.7 Enhanced Soft-Off State .......................................................... 35
6.2 OEM BIOS Customization........................................................ 35
6.2.1 OEM Default Settings .............................................................. 36
6.2.2 OEM Boot Logo....................................................................... 36
6.2.3 OEM POST Logo ..................................................................... 36
6.2.4 OEM DXE Driver...................................................................... 36
6.3 congatec Battery Management Interface ................................ 36
6.4 API Support (CGOS) ................................................................ 37
6.5 Security Features...................................................................... 37
6.6 Suspend to Ram....................................................................... 37
7 conga Tech Notes .................................................................... 38
7.1 Adaptive Thermal Monitor and Catastrophic Thermal Protection
38
7.2 Processor Performance Control ............................................... 39
7.2.1 Intel®SpeedStep®Technology (EIST) ...................................... 39
7.2.2 Intel®Turbo Boost Technology ................................................ 39
7.3 Intel®Virtualization Technology ............................................... 40

Copyright © 2022 congatec GmbH TCTOm01 9/70
7.4 Thermal Management ............................................................. 40
7.5 ACPI Suspend Modes and Resume Events.............................. 41
8 Signal Descriptions and Pinout Tables..................................... 42
8.1 Connector Signal Descriptions ................................................ 43
8.2 Bootstrap Signals..................................................................... 65
9 System Resources .................................................................... 66
9.1 I/O Address Assignment.......................................................... 66
9.1.1 LPC Bus.................................................................................... 66
9.2 PCI Configuration Space Map ................................................. 67
9.3 I2C............................................................................................ 68
9.4 SM Bus..................................................................................... 68
10 BIOS Setup Description........................................................... 69
10.1 Navigating the BIOS Setup Menu ........................................... 69
10.2 BIOS Versions........................................................................... 69
10.3 Updating the BIOS................................................................... 70
10.3.1 Update from External Flash ..................................................... 70
10.4 Supported Flash Devices ......................................................... 70

Copyright © 2022 congatec GmbH TCTOm01 10/70
List of Tables
Table 1 COM Express™ 3.0 Pinout Types ............................................ 11
Table 2 Commercial Variants ................................................................ 12
Table 3 conga-TC570r Industrial Variants............................................. 12
Table 4 Feature Summary..................................................................... 13
Table 5 Overview of Type 6 Limitations................................................ 15
Table 6 Measurement Description........................................................ 16
Table 7 Power Consumption Values ..................................................... 16
Table 8 CMOS Battery Power Consumption ........................................ 17
Table 9 Cooling Solution Variants......................................................... 19
Table 10 Display Combination and Resolution.......................................25
Table 11 Wake Events............................................................................. 41
Table 12 Signal Tables Terminology Descriptions .................................. 42
Table 13 Connector A–B Pinout ............................................................. 43
Table 14 Connector C–D Pinout............................................................. 45
Table 15 PCI Express Signal Descriptions (General Purpose)................. 47
Table 16 PCI Express Signal Descriptions (x16 Graphics)....................... 48
Table 17 DDI Signal Description............................................................. 50
Table 18 TMDS Signal Descriptions ....................................................... 51
Table 19 DisplayPort (DP) Signal Descriptions ....................................... 53
Table 20 Embedded DisplayPort Signal Descriptions............................ 54
Table 21 CRT Signal Descriptions........................................................... 55
Table 22 LVDS Signal Descriptions......................................................... 55
Table 23 Serial ATA Signal Descriptions ................................................. 56
Table 24 USB 2. 0 Signal Descriptions.................................................... 56
Table 25 USB 3.0 Signal Descriptions..................................................... 57
Table 26 Gigabit Ethernet Signal Descriptions....................................... 58
Table 27 High Definition Audio Link Signals Descriptions ..................... 59
Table 28 LPC Signal Descriptions........................................................... 59
Table 29 SPI BIOS Flash Interface Signal Descriptions........................... 60
Table 30 Miscellaneous Signal Descriptions........................................... 60
Table 31 General Purpose I/O Signal Descriptions ................................ 61
Table 32 Power and System Management Signal Descriptions ............. 61
Table 33 Rapid Shutdown Signal Descriptions....................................... 62
Table 34 Thermal Protection Signal Descriptions................................... 62
Table 35 SMBus Signal Description........................................................ 62
Table 36 General Purpose Serial Interface Signal Descriptions.............. 63
Table 37 Module Type Definition Signal Description ............................. 63
Table 38 Power and GND Signal Descriptions....................................... 64
Table 39 Bootstrap Signal Descriptions.................................................. 65

Copyright © 2022 congatec GmbH TCTOm01 11/70
1 Introduction
1.1 COM Express™ Concept
COM Express™ is an open industry standard defined specifically for COMs (computer on modules). Its creation makes it possible to smoothly
transition from legacy interfaces to the newest technologies available today. COM Express™ modules are available in following form factors:
•Mini 84 mm x 55 mm
•Compact 95 mm x 95 mm
•Basic 125 mm x 95 mm
•Extended 155 mm x 110 mm
Table 1 COM Express™ 3.0 Pinout Types
Types Connector
Rows
PCIe Lanes PEG SATA Ports LAN ports USB 2.0/
SuperSpeed USB
Display Interfaces
Type 6 A-B C-D Up to 24 1 Up to 4 1 Up to 8 / 4 1VGA,LVDS/eDP, PEG, 3x DDI
Type 7 A-B C-D Up to 32 - Up to 2 5 (1x 1 Gb, 4x 10 Gb) Up to 4 / 4
Type 10 A-B Up to 4 - Up to 2 1 Up to 8 / 2 1LVDS/eDP, 1xDDI
1. The SuperSpeed USB ports (USB 3.0) are not in addition to the USB 2.0 ports. Up to 4 of the USB 2.0 ports can support SuperSpeed USB.
The conga-TC570r modules use the Type 6 pinout definition and comply with COM Express 3.0 specification. They are equipped with two high
performance connectors that ensure stable data throughput.
The COM integrates all the core components and is mounted onto an application specific carrier board. COM modules are legacy-free design
(no Super I/O, PS/2 keyboard and mouse) and provide most of the functional requirements for any application. These functions include, but
are not limited to a rich complement of contemporary high bandwidth serial interfaces such as PCI Express, Serial ATA, USB 2.0, and Gigabit
Ethernet. The robust thermal and mechanical concept, combined with extended power-management capabilities, is perfectly suited for all
applications.
Carrier board designers can use as little or as many of the I/O interfaces as deemed necessary. The carrier board can therefore provide all
the interface connectors required to attach the system to the application specific peripherals. This versatility allows the designer to create a
dense and optimized package, which results in a more reliable product while simplifying system integration. Most importantly, COM Express™
modules are scalable, which means once an application has been created there is the ability to diversify the product range through the use
of different performance class or form factor size modules. Simply unplug one module and replace it with another; no redesign is necessary.
modules are scalable, which means once an application has been created there is the ability to diversify the product range through the use
of different performance class or form factor size modules. Simply unplug one module and replace it with another; no redesign is necessary.

Copyright © 2022 congatec GmbH TCTOm01 12/70
1.2 Options Information
The conga-TC570r is currently available in four variants (one commercial and three industrial). The table below shows the different configurations.
Table 2 Commercial Variants
Part-No. 050320
Processor Intel®Celeron®6305E
1.8 GHz Dual Core
Intel®Smart Cache 4 MB
Max. Turbo Frequency N.A
Processor Graphics Intel®UHD Graphics
(with 48 EU)
GFX Base/Max. Dynamic Freq. 1.25 GHz
Onboard Memory
(LPDDR4x)
4 GB, 3733 MTps
single channel
Non-ECC
Processor TDP (cTDP down) 15 W (N.A)
Compatible Carrier Board conga-TEVAL/COMe 3.0 Evaluation Carrier Board for COM Express Type 6 modules
Table 3 conga-TC570r Industrial Variants
Part-No. 050330 050331 050312
Processor Intel®Core™ i7-1185GRE
1.8 GHz Quad Core™
Intel®Core™ i5-1145GRE
1.5 GHz Quad Core™
Intel®Core™ i3-1115GRE 2.2 GHz
Dual Core™
Intel®Smart Cache 12 MB 8 MB 6 MB
Max. Turbo Frequency 4.4 GHz 4.1 GHz 3.9 GHz
Processor Graphics Intel®Iris®Xe
(with 96 EU)
Intel®Iris®Xe
(with 80 EU)
Intel®UHD Graphics
(with 48 EU)
GFX Base/Max. Dynamic Freq. 1.35 GHz 1.35 GHz 1.25 GHz
Onboard Memory
(LPDDR4x)
32 GB, 4266 MTps,
dual channel
InBand ECC (IBECC)
16 GB, 4266 MTps
dual channel
InBand ECC (IBECC)
8 GB, 3733 MTps
dual channel
InBand ECC (IBECC)
Processor TDP (cTDP down) 15 (12) W 15 (12) W 15 (12) W
Compatible Carrier Board conga-TEVAL/COMe 3.0 Evaluation Carrier Board for COM Express Type 6 modules

Copyright © 2022 congatec GmbH TCTOm01 13/70
2 Specifications
2.1 Feature List
Table 4 Feature Summary
Form Factor Based on COM Express™ standard pinout Type 6 Rev. 3.0 (Compact size 95 x 95 mm)
Processor 11th Generation Intel®Core™ i7,i5, i3 and Celeron®Single Chip IOT UP3 Processors
Memory Onboard LPDDR4x memory with support for:
-data rates up to 4266 MTps
-up to 32 GB capacity
-in-band ECC 1 (out-of-band ECC is not supported)
Chipset Intel®500 Series PCH-LP integrated in the Multi-Chip Package
Audio High Definition Audio interface with support for multiple codecs
Ethernet Intel®i225 LM/V/IT 2.5 GbE controller with support for TSN
Graphics Options Intel® Iris®Xe (Gen. 12). Supports:
-API (DirectX 12, Direct3D 12, Direct3D 2015, OpenGL 4.5, OpenCL 2.2)
-Intel®QuickSync & Clear Video Technology HD (hardware accelerated video decode/encode/processing/transcode)
-Up to four independent displays (see table 10 “Display Combination and Resolution”)
3x DP++
1x LVDS/eDP 2
1x PEG x4 port (PCIe Gen 4)
1x VGA 3
Resolutions up to 4x4K @ 60 Hz
Peripheral
Interfaces
8x USB 2.0 (Up to 4x USB 3.2 Gen 2x1)
Up to 2x SATA® 6 with RAID 0/1/5 (shared with PCIe5 and PCIe6) 4
Up to 8x PCI Express®Gen. 3 lanes 4
2x UART (16C550 compatible)
GPIOs
LPC
I²C (fast mode, multi-master)
SMB
SPI
BIOS AMI Aptio®V UEFI 2.x firmware
32 MB serial SPI flash with congatec Embedded BIOS features
Power
Management
ACPI 5.0a compliant with battery support.
S5e mode (see section 6.1.7 “Enhanced Soft-Off State”)
Deep Sx and Suspend t o RAM (S3)
Configurable TDP
congatec Board
Controller
Multi-stage watchdog, non-volatile user data storage, manufacturing and board information, board statistics, hardware monitoring, fan control, I2C
bus, Power loss control
Security Discrete SPI Trusted Platform Module (Infineon SLB9670VQ2.0); AES Instructions

Copyright © 2022 congatec GmbH TCTOm01 14/70
Note
1. Industrial variants only
2. Both interfaces are not supported at the same time
3. Default on commercial variants; assembly option on industrial variants
4. PCIe5 is shared with SATA1; PCIe6 is shared with SATA0 and PCIe7 is shared with USB 3.2 Gen 1x2, port 3
2.2 Supported Operating Systems
The conga-TC570r supports the following operating systems.
•Microsoft®Windows® 10 (64-bit)
•Microsoft®Windows® 10 IoT Enterprise (64-bit)
•Linux Ubuntu (64-bit)
•Real Time Systems Hypervisor
Note
1. The processor supports only 64-bit operating systems.
2. The conga-TC570r supports only native UEFI Operating Systems. Legacy Operating Systems which require CSM (Compatibility Suppport
Module) as part of the UEFI firmware are not supported anymore.
2.3 Mechanical Dimensions
•Length of 95 mm
•Width of 95 mm
The overall height (module, heatspreader and stack) is shown below: Heatspreader
All dimensions in millimeter
Module PCB
Carrier Board PCB
13.00
4.00
5.00
4.50
2.00±10%
7.00 18.00

Copyright © 2022 congatec GmbH TCTOm01 15/70
2.4 Supply Voltage Standard Power
•8 V – 20 V DC
2.4.1 Electrical Characteristics
Power supply pins on the module’s connectors limit the amount of input power. The following table provides an overview of the limitations for
pinout Type 6 (dual connector, 440 pins).
Table 5 Overview of Type 6 Limitations
Power Rail Module Pin
Current Capability
(Ampere)
Nominal
Input (Volts)
Input
Range
(Volts)
Derated
Input (Volts)
Max. Input Ripple
(10Hz to 20MHz)
(mV)
Max. Module Input
Power (w. derated input)
(Watts)
Assumed
Conversion
Efficiency
Max. Load
Power
(Watts)
VCC_12V 12 12 11.4-12.6 11.4 +/- 100 137 85% 116
VCC_5V-SBY 2 5 4.75-5.25 4.75 +/- 50 9
VCC_RTC 0.5 3 2.5-3.3 +/- 20
2.4.2 Rise Time
The input voltages shall rise from 10 percent of nominal to 90 percent of nominal at a minimum slope of 250 V/s. The smooth turn-on requires
that, during the 10 percent to 90 percent portion of the rise time, the slope of the turn-on waveform must be positive.
2.5 Power Consumption
The power consumption values were measured with the following setup:
•Input voltage +12 V
•conga-TC570r COM
•Modified congatec carrier board
•conga-TC570r cooling solution
•Microsoft Windows 10 (64 bit)
Note
The CPU was stressed to its maximum workload with the Intel®Thermal Analysis Tool

Copyright © 2022 congatec GmbH TCTOm01 16/70
Table 6 Measurement Description
The power consumption values were recorded during the following system states:
System State Description Comment
S0: Minimum value Lowest frequency mode (LFM) with minimum core voltage during desktop idle
S0: Maximum value Highest frequency mode (HFM/Turbo Boost) The CPU was stressed to its maximum frequency
S0: Peak current Highest current spike during the measurement of “S0: Maximum value”. This
state shows the peak value during runtime.
Consider this value when designing the system’s power supply to
ensure that sufficient power is supplied during worst case scenarios
S3 COM is powered by VCC_5V_SBY
S5 COM is powered by VCC_5V_SBY
S5e COM is powered by VCC_5V_SBY
Note
1. The fan and SATA drives were powered externally.
2. All other peripherals except the LCD monitor were disconnected before measurement
Table 7 Power Consumption Values
The table below provides additional information about the conga-TC570r power consumption. The values were recorded at various operating
mode.
Part
No.
Memory
Size
H.W
Rev.
BIOS
Rev.
OS
(64 bit)
CPU Current (Ampere)
Variant Cores Freq. /Turbo
(GHz)
S0:
Min
S0:
Max
S0:
Peak
S3 S5 S5e
050320 4 GB A.x TBD Windows 10 Intel®Celeron®6305E 2 1.8 / N.A TBD TBD TBD TBD TBD TBD
050330 32 GB A.x TBD Windows 10 Intel®Core™ i7-1185GRE 4 1.8 / 4.4 TBD TBD TBD TBD TBD TBD
050331 16 GB A.x TBD Windows 10 Intel®Core™ i5-1145GRE 4 1.5 / 4.1 TBD TBD TBD TBD TBD TBD
050332 8 GB A.x TBD Windows 10 Intel®Core™ i3-1115GRE 2 2.2 / 3.9 TBD TBD TBD TBD TBD TBD

Copyright © 2022 congatec GmbH TCTOm01 17/70
2.6 Supply Voltage Battery Power
Table 8 CMOS Battery Power Consumption
RTC @ Voltage Current
-10oC 3V DC TBD µA
20oC 3V DC TBD µA
70oC 3V DC TBD µA
Note
1. Do not use the CMOS battery power consumption values listed above to calculate CMOS battery lifetime.
2. Measure the CMOS battery power consumption of your application in worst case conditions (for example, during high temperature and
high battery voltage).
3. Consider the self-discharge of the battery when calculating the lifetime of the CMOS battery. For more information, refer to application
note AN9_RTC_Battery_Lifetime.pdf on congatec GmbH website at www.congatec.com/support/application-notes.
4. We recommend to always have a CMOS battery present when operating the conga-TC570r.
2.7 Environmental Specifications
Temperature (commercial variants) Operation: 0° to +60°C Storage: -20° to +80°C
Temperature (industrial variants) Operation: -40° to 85°C Storage: -40° to 85°C (up to 1 Gb Ethernet)
Temperature (industrial variants) Operation: -40° to 70°C Storage: -40° to 85°C (up to 2.5 Gb Ethernet)
Humidity Operation: 10% to 90% Storage: 5% to 95%
Caution
The above operating temperatures must be strictly adhered to at all times. When using a congatec heatspreader, the maximum operating
temperature refers to any measurable spot on the heatspreader’s surface.
Humidity specifications are for non-condensing conditions.

Copyright © 2022 congatec GmbH TCTOm01 18/70
3 Block Diagram
PECI
PCIe 0-4 (Gen 3)
LPDDR4x
DDI TCP0
DDI TCP1
DDI TCP2
PCIe x4 Gen 4
DDIB
CSI
eDP
SM Bus
eSPI
SATA 0/PCIe 6
SATA 1/PCIe 5
PCIe
HDA
SPI0
MGMNT
11
th
Gen. Intel
®
Core
™
“Tiger Lake”
MCP UP3 Processor
USB 3.2 Port 3/PCIe 7
8x USB 2.0
USB 3.2 Port 0-2
SPI Flash 0 TPM
Ethernet 10/100/1000/2500
Intel i225LM/V/IT
eDP to LVDS
eSPI to LPC
MUX
MUX
MUX
MUX
MUX
DP to VGA
MIPI-CSI
SATA0/PCIe6 SATA0 SATA0
SATA1/PCIe5 SATA1 SATA1
PCIe6
PCIe6
USB 3.2 Port 3
PCIe7
PCIe7
PCIe5
PCIe5
PCIe0-4
Optional - Not available by default
congatec
Board
Controller
5th Generation
LPC
GPIO
SMB
UART
UART
I2C
LID/SLEEP/FAN
Onboard Memory
Dual Channel
LPDDR4x
Ethernet
HD Audio
SM Bus
SPI
VGA
LVDS/eDP
LPC
I2C Bus
USB 2.0 Port 0 - 7
SATA Port 0 - 1
SER0/1
GPIOs
LID# / SLEEP# / FAN
PCIe lane 0 - 7 (Gen 3)
1 PCIe x4 Gen 4 (PEG)
USB 3.2 Port 0 - 3
DDI 2
DDI 1
DDI 3

Copyright © 2022 congatec GmbH TCTOm01 19/70
4 Cooling Solutions
congatec GmbH offers the following cooling solutions for the conga-TC570r. The dimensions of the cooling solutions are shown in the
sub-sections. All measurements are in millimeters.
Table 9 Cooling Solution Variants
Cooling Solution Part No Description
1 CSA 050350 Active cooling solution with integrated heat pipes and 2.7 mm bore-hole standoffs
050351 Active cooling with integrated heat pipes and M2.5 mm threaded standoffs
2 CSP 050352 Passive cooling solution with integrated heat pipes and 2.7 mm bore-hole standoffs
050353 Passive cooling solution with integrated heat pipes and M2.5 mm threaded standoffs
3 HSP 050354 Heatspreader with integrated heat pipes and 2.7 mm bore-hole standoffs
050355 Heatspreader with with integrated heat pipes and M2.5 mm threaded standoffs
Note
1. We recommend a maximum torque of 0.4 Nm for carrier board mounting screws and 0.5 Nm for module mounting screws.
2. The gap pad material used on congatec heatspreaders may contain silicon oil that can seep out over time depending on the environmental
conditions it is subjected to. For more information about this subject, contact your local congatec sales representative and request the gap
pad material manufacturer’s specification.
Caution
1. The congatec heatspreaders/cooling solutions are tested only within the commercial temperature range of 0° to 60°C. Therefore, if your
application that features a congatec heatspreader/cooling solution operates outside this temperature range, ensure the correct operating
temperature of the module is maintained at all times. This may require additional cooling components for your final application’s thermal
solution.
2. For adequate heat dissipation, use the mounting holes on the cooling solution to attach it to the module. Apply thread-locking fluid on
the screws if the cooling solution is used in a high shock and/or vibration environment. To prevent the standoff from stripping or cross-
threading, use non-threaded carrier board standoffs to mount threaded cooling solutions.
3. For applications that require vertically-mounted cooling solution, use only coolers that secure the thermal stacks with fixing post. Without
the fixing post feature, the thermal stacks may move.
4. Do not exceed the recommended maximum torque. Doing so may damage the module or the carrier board, or both.

Copyright © 2022 congatec GmbH TCTOm01 20/70
4.1 CSA Dimensions
M2.5 x 11 mm
threaded standoff
for threaded version
or
ø2.7 x 11 mm
non-threaded standoff
for borehole version
87
95
87
95
37.25
76
62.4
25.5
4
4