Congatec Conga-ic370 User manual

conga-IC370 Thin Mini-ITX SBC

8th Generation Intel Core i7, i5, i3 and Celeron Single Chip Ultra Low TDP U-Series SoC

User's Guide

Revision 1.2

Revision History

Revision Date (yyyy-mm-dd) Author Changes

0.1 2020-02-26 AEM •Preliminary release

1.0 2020-04-15 AEM •Updated tables 8 “Power Consumption Values” and 9 “CMOS Battery Power Consumption”

•Ofﬁcial release

1.1 2020-05-29 AEM •Added note about X20 USB 3.1 compliancy in section 5.4.1 “Rear USB 3.1 Gen Port”

1.2 2020-07-03 AEM •Updated section 2.2 “Supported Operating Systems”

Preface

This user’s guide provides information about the components, features and connectors available on the conga-IC370 Thin Mini-ITX single

board computer.

Disclaimer

The information contained within this user’s guide, including but not limited to any product speciﬁcation, is subject to change without notice.

congatec AG provides no warranty with regard to this user’s guide or any other information contained herein and hereby expressly disclaims

any implied warranties of merchantability or ﬁtness for any particular purpose with regard to any of the foregoing. congatec AG assumes

no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for

discrepancies between the product and the user’s guide. In no event shall congatec AG be liable for any incidental, consequential, special, or

exemplary damages, whether based on tort, contract or otherwise, arising out of or in connection with this user’s guide or any other information

contained herein or the use thereof.

Intended Audience

This user's guide is intended for technically qualiﬁed personnel. It is not intended for general audiences.

Lead-Free Designs (RoHS)

All congatec AG products are created from lead-free components and are completely RoHS compliant.

Electrostatic Sensitive Device

All congatec AG products are electrostatic sensitive devices. They are enclosed in static shielding bags, and shipped enclosed in secondary

packaging (protective packaging). The secondary packaging does not provide electrostatic protection.

Do not remove the device from the static shielding bag or handle it, except at an electrostatic-free workstation. Also, do not ship or store

electronic devices near strong electrostatic, electromagnetic, magnetic, or radioactive ﬁelds unless the device is contained within its original

packaging. Be aware that failure to comply with these guidelines will void the congatec AG Limited Warranty.

Symbols

The following symbols are used in this user's guide:

Warning

Warnings indicate conditions that, if not observed, can cause personal injury.

Caution

Cautions warn the user about how to prevent damage to hardware or loss of data.

Note

Notes call attention to important information that should be observed.

Connector Type

Describes the connector used on the Single Board Computer.

without written permission from congatec AG.

congatec AG has made every attempt to ensure that the information in this document is accurate yet the information contained within is

supplied “as-is”.

Trademarks

Product names, logos, brands, and other trademarks featured or referred to within this user’s guide, or the congatec website, are the property

of their respective trademark holders. These trademark holders are not afﬁliated with congatec AG, our products, or our website.

Warranty

congatec AG makes no representation, warranty or guaranty, express or implied regarding the products except its standard form of limited

warranty (“Limited Warranty”) per the terms and conditions of the congatec entity, which the product is delivered from. These terms and

conditions can be downloaded from www.congatec.com. congatec AG may in its sole discretion modify its Limited Warranty at any time and

from time to time.

The products may include software. Use of the software is subject to the terms and conditions set out in the respective owner’s license

agreements, which are available at www.congatec.com and/or upon request.

Beginning on the date of shipment to its direct customer and continuing for the published warranty period, congatec AG represents that the

products are new and warrants that each product failing to function properly under normal use, due to a defect in materials or workmanship or

due to non conformance to the agreed upon speciﬁcations, will be repaired or exchanged, at congatec’s option and expense.

Customer will obtain a Return Material Authorization (“RMA”) number from congatec AG prior to returning the non conforming product freight

prepaid. congatec AG will pay for transporting the repaired or exchanged product to the customer.

Repaired, replaced or exchanged product will be warranted for the repair warranty period in effect as of the date the repaired, exchanged

or replaced product is shipped by congatec, or the remainder of the original warranty, whichever is longer. This Limited Warranty extends to

congatec’s direct customer only and is not assignable or transferable.

Except as set forth in writing in the Limited Warranty, congatec makes no performance representations, warranties, or guarantees, either

express or implied, oral or written, with respect to the products, including without limitation any implied warranty (a) of merchantability, (b) of

ﬁtness for a particular purpose, or (c) arising from course of performance, course of dealing, or usage of trade.

congatec AG shall in no event be liable to the end user for collateral or consequential damages of any kind. congatec shall not otherwise be

liable for loss, damage or expense directly or indirectly arising from the use of the product or from any other cause. The sole and exclusive

remedy against congatec, whether a claim sound in contract, warranty, tort or any other legal theory, shall be repair or replacement of the

product only.

Certiﬁcation

congatec AG is certiﬁed to DIN EN ISO 9001 standard.

Technical Support

congatec AG technicians and engineers are committed to providing the best possible technical support for our customers so that our products

can be easily used and implemented. We request that you ﬁrst visit our website at www.congatec.com for the latest documentation, utilities

and drivers, which have been made available to assist you. If you still require assistance after visiting our website then contact our technical

support department by email at [email protected]

Terminology

Term Description

cBC congatec Board Controller

DVI Digital Visual Interface

eDP Embedded DisplayPort

GbE Gigabit Ethernet

HDA High Deﬁnition Audio

HDMI High Deﬁnition Multimedia Interface

iDP Internal DisplayPort

I²C Bus Inter-Integrated Circuit Bus

LPC Low Pin-Count

LVDS Low-Voltage Differential Signaling

N.A Not available

N.C Not connected

PCIe Peripheral Component Interface Express

PN Part Number

PTT Platform Trust Technology

SATA Serial AT Attachment

SBC Single Board Computer

SDIO Secure Digital Input Output

SM Bus System Management Bus

SPI Serial Peripheral Interface

S/PDIF Sony/Philips Digital Interconnect Format

S5e Enhanced S5 (congatec proprietary low-power soft-off state)

T.B.D To be determined

USB Universal Serial Bus

WDG Watchdog

Contents

1 Introduction ............................................................................. 10

1.1 Mini-ITX Concept..................................................................... 10

1.2 conga-IC370 ............................................................................ 10

1.2.1 Options Information................................................................. 11

1.2.2 Optional Accessories ............................................................... 11

2 Speciﬁcation ............................................................................ 13

2.1 Feature List .............................................................................. 13

2.2 Supported Operating Systems ................................................ 14

2.3 Mechanical Dimensions ........................................................... 14

2.4 Supply Voltage Power.............................................................. 15

2.5 Power Consumption ................................................................ 15

2.6 Supply Voltage Battery Power ................................................. 16

2.7 Environmental Speciﬁcations................................................... 17

3 Block Diagram.......................................................................... 18

4 Cooling Solution ...................................................................... 19

4.1 CSA Dimensions ...................................................................... 20

4.2 Assembly Instruction................................................................ 21

5 Connector Description............................................................. 22

5.1 Power Supply Connectors........................................................ 22

5.1.1 DC Power Jack (Rear I/O) ........................................................ 22

5.1.2 Mini-Fit 4-Pin Connector.......................................................... 22

5.1.3 Power Status LEDs ................................................................... 23

5.1.4 Power-On Control Jumper....................................................... 24

5.1.5 CMOS Battery Header............................................................. 24

5.2 Extension Sockets ................................................................... 25

5.2.1 PCIe x4 Socket......................................................................... 25

5.2.2 PCIe Mini Card Socket............................................................. 26

5.2.3 M.2 Key B Socket..................................................................... 28

5.2.4 M.2 Key E Socket..................................................................... 29

5.2.5 PCI Express Routing................................................................. 31

5.3 Display Interfaces..................................................................... 32

5.3.1 Display Port.............................................................................. 32

5.3.2 LVDS Header............................................................................ 32

5.3.3 Embedded DisplayPort (eDP) .................................................. 34

5.3.4 Panel Voltage Selection Jumper.............................................. 35

5.3.5 Backlight Power Connector ..................................................... 36

5.3.6 Backlight Power Selection Jumper .......................................... 37

5.3.7 Backlight Control Jumper ........................................................ 37

5.3.8 Monitor OFF Header ............................................................... 38

5.4 USB Connectors....................................................................... 38

5.4.1 Rear USB 3.1 Gen 2 Port.......................................................... 39

5.4.2 Rear USB 2.0 Port .................................................................... 39

5.4.3 Internal USB 2.0 Port ................................................................................................................ 40

5.4.4 Internal USB 3.1 Gen 2 Port..................................................... 40

5.5 SATA Connectors ..................................................................... 41

5.5.1 Standard SATA Port ................................................................. 41

5.5.2 M.2 Key B Socket..................................................................... 42

5.5.3 SATA Power Header................................................................. 42

5.5.4 Optional SATADOM Power Connector.................................... 42

5.6 Ethernet ................................................................................... 43

5.7 Audio Connectors.................................................................... 44

5.7.1 Rear Audio ............................................................................... 44

5.7.2 Internal Audio .......................................................................... 45

5.7.2.1 Stereo Speaker Header............................................................ 45

5.7.2.2 Digital Microphone Header ..................................................... 45

5.7.2.3 S/PDIF Header ......................................................................... 46

5.7.2.4 Front Panel Header.................................................................. 46

5.8 COM Port Headers .................................................................. 47

5.8.1 COM 1 and 2 (RS232/RS422/RS484) ....................................... 47

5.8.2 COM 3 and 4 (RS232) .............................................................. 48

5.9 GPIO Header ........................................................................... 48

5.10 I²C Bus/SM Bus Header ........................................................... 49

5.11 Front Panel Header.................................................................. 50

5.12 CPU and System Fan Header................................................... 51

5.13 Sleep and Lid Button Header ................................................. 52

5.14 External BIOS Flash ................................................................. 52

5.15 Chassis Intrusion Connector .................................................... 53

5.16 Feature Header ....................................................................... 53

6 Additional Features.................................................................. 54

6.1 Micro-SIM Card........................................................................ 54

6.2 Micro-SD Card ......................................................................... 55

6.3 Security Features...................................................................... 55

6.4 Beeper ..................................................................................... 55

6.5 Optional CAN Header ............................................................. 56

6.6 congatec Board Controller (cBC) ............................................. 56

6.6.1 Fan Control .............................................................................. 56

6.6.2 Power Loss Control.................................................................. 57

6.6.3 Board Information.................................................................... 57

6.7 OEM BIOS Customization........................................................ 57

6.7.1 OEM Default Settings .............................................................. 57

6.7.2 OEM Boot Logo....................................................................... 58

6.7.3 OEM POST Logo ..................................................................... 58

6.7.4 OEM BIOS Code/Data............................................................. 58

6.7.5 OEM DXE Driver...................................................................... 58

6.8 congatec Battery Management Interface ................................ 59

6.9 API Support (CGOS) ................................................................ 59

6.10 Thermal and Voltage Monitoring............................................. 59

6.11 External System Wake Event ................................................... 59

7 Mechanical Drawing ................................................................ 60

8 BIOS Setup Description........................................................... 61

8.1 Navigating the BIOS Setup Menu ........................................... 61

8.2 BIOS Versions........................................................................... 61

8.3 Updating the BIOS................................................................... 62

8.4 Supported Flash Devices ......................................................... 62

List of Tables

Table 1 conga-IC370 Variants............................................................... 11

Table 2 Cooling/IO Shield .................................................................... 11

Table 3 Cables...................................................................................... 12

Table 4 Adapters .................................................................................. 12

Table 5 Power Supply ........................................................................... 12

Table 6 Feature Summary..................................................................... 13

Table 7 Measurement Description........................................................ 15

Table 8 Power Consumption Values ..................................................... 16

Table 9 CMOS Battery Power Consumption ........................................ 16

Table 10 Cooling Solution Variants......................................................... 19

Table 11 X58 Pinout Description ............................................................ 22

Table 12 X59 Pinout Description ............................................................ 22

Table 13 Front Panel LED States ............................................................ 23

Table 14 Onboard LED States ................................................................ 23

Table 15 Auto Power-On Control ........................................................... 24

Table 16 X8 Pinout Description .............................................................. 25

Table 17 X9 Pinout Description .............................................................. 26

Table 18 X64 Pinout Description ............................................................ 28

Table 19 X12 Pinout Description ............................................................ 29

Table 20 X32 Pinout Description ........................................................... 33

Table 21 X27 Pinout Description ............................................................ 34

Table 22 X29 Pinout Description ............................................................ 35

Table 23 X31 Pinout Description ............................................................ 36

Table 24 X30 Pinout Description ............................................................ 37

Table 25 X65 Pinout Description ............................................................ 37

Table 26 X28 Pinout Description ............................................................ 38

Table 27 X21 Pinout Description ............................................................ 40

Table 28 X66 Pinout Description. ........................................................... 42

Table 29 X5 LED Description.................................................................. 43

Table 30 X6 LED Description.................................................................. 43

Table 31 X33 Pinout Description ............................................................ 44

Table 32 X34 Pinout Description ............................................................ 44

Table 33 X38 Pinout Description ............................................................ 45

Table 34 X35 Pinout Description ............................................................ 45

Table 35 X37 Pinout Description ............................................................ 46

Table 36 X36 Pinout Description ............................................................ 46

Table 37 X39, X40 Pinout Description.................................................... 47

Table 38 X41, X42 Pinout Description.................................................... 47

Table 39 X56, X57 Pinout Description.................................................... 48

Table 40 X50, X51 Pinout Description.................................................... 48

Table 41 X43 Pinout Description ............................................................ 49

Table 42 X52 Pinout Description ............................................................ 49

Table 43 X47 Pinout Description ............................................................ 50

Table 44 X54 Pinout Description ............................................................ 51

Table 45 X55 Pinout Description ............................................................ 51

Table 46 X48 Pinout Description ............................................................ 52

Table 47 X2 Pinout Description .............................................................. 52

Table 48 X1 Pinout Description .............................................................. 53

Table 49 X44 Pinout Description ............................................................ 53

Table 50 X11 Pinout Description ............................................................ 54

Table 51 X53 Pinout Description ............................................................ 55

Table 52 Optional X46 Pinout Description............................................. 56

1 Introduction

1.1 Mini-ITX Concept

The Mini-ITX form factor provides enthusiasts and manufacturers with a standardized ultra compact platform for development. With a footprint

of 170 mm x170 mm, this scalable platform promotes the design of highly integrated, energy efﬁcient systems. Due to its small size, the Mini-

ITX form factor enables PC appliance designers not only to design attractive low cost devices but also allows them to explore a huge variety of

product development options - from compact space-saving designs to fully functional Information Station and Value PC systems. This helps to

reduce product design cycle and encourages rapid innovation in system design, to meet the ever-changing needs of the market.

Additionally, the boards can also be passively cooled, presenting opportunities for fanless designs. The Mini-ITX boards are equipped with

various interfaces such as PCI Express, SATA, USB 2.0/3.0, Ethernet, Displays and Audio.

1.2 conga-IC370

The conga-IC370 is a Single Board Computer designed based on the Thin Mini-ITX speciﬁcation. The conga-IC370 features the 8th Generation

Intel Core or Celeron U-Series processors. With 15 W base TDP, the SBC offers Ultra Low Power boards with high computing performance and

outstanding graphics. Additionally, the SBC supports dual channel DDR4 up to 2400 MT/s for a maximum system memory capacity of 64 GB,

multiple I/O interfaces, up to three independent displays and various congatec embedded features.

With smaller board size and lower height keep-out zones, the conga-IC370 SBC provides manufacturers and system designers with the

opportunity to design compact systems for space restricted areas.

The various features and capabilities offered by the conga-IC370 makes it ideal for the design of compact, energy efﬁcient, performance-

oriented embedded systems.

1.2.1 Options Information

The conga-IC370 is currently available in four variants. The table below shows the different conﬁgurations available.

Table 1 conga-IC370 Variants

Part-No. 053001 053002 053003 053005

Processor Intel®Core™ i7-8665UE

1.7 GHz Quad Core™

Intel®Core™ i5-8365UE

1.6 GHz Quad Core™

Intel®Core™ i3-8145UE

2.2 GHz Dual Core™

Intel®Celeron®4305UE

2.0 GHz Dual Core

Intel®Smart Cache 8 MB 6 MB 4 MB 2 MB

Max. Turbo

Frequency

4.4 GHz 4.1 GHz 3.9 GHz N.A

Processor Graphics Intel®UHD Graphics 620

(GT2)

Intel®UHD Graphics 620

(GT2)

Intel®UHD Graphics 620

(GT2)

Intel®UHD Graphics 610

(GT1)

GFX Base/Max.

Dynamic Freq.

0.3 / 1.15 GHz 0.3 / 1.05 GHz 0.3 / 1.0 GHz 0.3 / 1.0 GHz

DDR4 Memory 2400 MT/s dual channel

Non-ECC

(up to 64 GB)

2400 MT/s dual channel

Non-ECC

(up to 64 GB)

2400 MT/s dual channel

Non-ECC

(up to 64 GB)

2133 MT/s dual channel

Non-ECC

(up to 64 GB)

Processor TDP

(cTDP )

15 W

(12.5/25 W)

15 W

(12.5/25 W)

15 W

(12.5/25 W)

15 W

1.2.2 Optional Accessories

Table 2 Cooling/IO Shield

Accessories Part No. Description

conga-IC97/CSA 052252 12 V active cooling solution with Thin Mini-ITX height (compatible with conga-IC370)

conga-IC97/Retention Frame 052254 Retention frame for conga-IC97/CSA (compatible with conga-IC370)

conga-IC370 IO Shield - Standard Size 053060 IO shield for conga-IC370 Mini-ITX height

conga-IC370 IO Shield - Thin Size 053061 IO shield for conga-IC370 with Thin Mini-ITX height

Table 3 Cables

Cables Part No. Description

SATA III cable straight/straight 48000029 30 cm SATA III cable with straight-straight connectors

SATA III cable down/straight 48000030 30 cm SATA III cable with down-straight connectors

cab-ThinMini-ITX-UART 14000121 UART cable with 2 x5-pin female housing and D-Sub male connector

cab-ThinMini-ITX-USB20-Twin 14000123 USB 2.0 cable with dual USB 2.0 Type A female connector and 2 x 5-pin housing

cab-ThinMini-ITX-BKLT 14000127 30 cm backlight cable with open end

cab-DP to HDMI Passive 14000128 Passive DisplayPort to HDMI cable

cab-ThinMini-ITX-eLVDS 14000129 30 cm ACES micro-coax cable for eDP or iDP

cab-Pico-ITX-GPIO 14000151 15 cm GPIO cable with open end

cab-Pico-ITX-Feature 14000161 15 cm cable with open ends for 8-pin I2C/SMB connector

cab-LVDS SHDR-40V 14000254 50 cm, 40-pin LVDS cable with JST SHDR-40 connector and open end

cab-LVDS SHDR-40V FI-X30HL 14000256 50 cm, 40-pin LVDS cable with JST SHDR-40 and JAE FI-X30HL connectors (for AUO G170EG01 V1

LCD panel)

cab-ThinMini-ITX-RS422 14000257 RS422 D-SUB9 adapter with 120 ohm bus termination for internal JST PHR-5 connector

cab-ThinMini-ITX-RS485 14000258 RS485 D-SUB9 adapter with 120 ohm bus termination for internal JST PHR-5 connector

cab-ThinMini-ITX-Speakers 14000259 Cable with open ends for connecting audio speakers

cab-ThinMini-ITX-Floppy to SATA Power 14000260 20 cm Delock 85248 cable for SATA power

cab-ThinMini-ITX-Buttons-Sleep&LID 14000261 cable adapter with two momentary push-buttons for sleep (yellow) and LID (green) function

USB C to internal USB 3.1 14000265 45 cm right-angle USB Type-C cable adapter for internal USB 3.1 connector

cab-ThinMini-ITX-BLKT 0511460600 14000272 50 cm backlight cable for LCD panel AUO G170EG01 V1

cab-ThinMini-ITX-Front Panel 14000273 15 cm Front panel cable adapter with buttons and LEDs

cab-ThinMini-ITX-Front Panel 100cm 14000274 100 cm front panel adapter with buttons and LEDS

Table 4 Adapters

Adapters Part No. Description

conga-Thin MITX/eDP to DP adapter 052231 eDP to standard DP adapter for variants with internal DP

conga-Thin MITX/eDP to HDMI adapter 052232 eDP to standard HDMI adapter for variants with internal DP

conga-eDP to LVDS Adapter 052234 eDP to LVDS adapter for variants with internal DP

Table 5 Power Supply

PSU Part No. Description

Power supply (90 W, 19 V @ 4.74 A) 10000146 FSP090-DIEBN2, Plug 7.4 x 5.1 x 12.5 mm

2 Speciﬁcation

2.1 Feature List

Table 6 Feature Summary

Form Factor Based on Thin Mini-ITX form factor (170 x 170 mm)

Processor 8th Generation Intel®Core™ i7,i5, i3 and Celeron Single Chip Ultra Low TDP Processors

Memory Two memory sockets (located on the top side of the conga-IC370). Supports

-SO-DIMM non-ECC DDR4 modules

-Data rates up to 2400 MT/s

-Maximum 64 GB capacity (32 GB each)

congatec Board

Controller

Multi-stage watchdog, non-volatile user data storage, manufacturing and board information, board statistics, hardware monitoring, fan control, I2C

bus, Power loss control

Chipset Intel®300 Series PCH-LP integrated in the Multi-Chip Package

Audio Realtek ALC888S-VD High Deﬁnition Audio

Ethernet 2x Gigabit Ethernet via:

-Intel®l219-LM for i7 and i5 variants (supports vPro/AMT) or l219-V for i3 and Celeron variants

-Intel I255-V (without TSN) or optional Intel®I225-LM (with support for TSN)

Graphic Interfaces 2x DP++

1x LVDS/eDP

Back Panel I/O

Connectors

1x DC-IN

2x DisplayPort++

1x Gigabit Ethernet

1x 2.5 Gigabit Ethernet

2x USB 3.1 Gen 2 Type-A

2x USB 2.0 Type-A

1x MIC IN

1x Line OUT

Onboard I/O

Connectors

Extension Sockets:

-1x PCIe x4

-1x Mini Card full-size or half-size (PCIe x1/USB)

-1x M.2 key B, type 2280/2242/3042 (PCIe x2/SATA/SIM)

-1x M.2 key E, type 2230 (PCIe x1/USB/CNVi)

SATA Connectors:

-2x Standard SATA 3.0/SATADOM

-1x SATA power header (12 V and 5 V)

Audio

-1x Stereo speaker header

-1x DMIC header

-1x SPDIF header

-1x Front panel header (HP-Out, MIC)

1x Dual USB 2.0 front panel header

1x USB 3.1 front panel header (Type-A or Type-C)

1x LVDS connector (top-side)

1x eDP connector (bottom-side)

1x Backlight power connector

1x Monitor OFF

4x COM ports

1x Micro-SD card slot

2x GPIO headers

2x SMB/I2C connectors

1x Feature connector (3.3 V, WDG, S3, S4, S5, PWROK, BATLOW, SDP)

1x Front panel header (power and reset buttons, LEDs)

1x Sleep button and LID switch header

1x Intrusion detection header (case open)

1x Micro-SIM card slot

2x Fan connectors (CPU and system fan)

1x Mini-FIT power connector

Optional Onboard

Connectors

1x Internal DP (this option does not support DisplayPort signals on connector X25)

2x SATADOM power header

CAN header

Other Features Thermal and voltage monitoring

CMOS Battery

Beeper

congatec standard BIOS (also possible to boot from an external BIOS ﬂash)

BIOS AMI Aptio®V UEFI 2.6 ﬁrmware

32 MB serial SPI ﬂash with congatec Embedded BIOS features

Power

Management

ACPI 4.0 compliant with battery support. Also supports Suspend to RAM (S3) and Intel AMT 11.

Conﬁgurable TDP

Ultra low standby power consumption, deep sleep.

Security Firmware TPM 2.0 (Intel PTT)

Discrete TPM 2.0 (Inﬁneon SLB9670)

2.2 Supported Operating Systems

The conga-IC370 supports the following operating systems.

•Microsoft®Windows® 10

•Microsoft®Windows® 10 IoT Enterprise

•Linux

•Yocto

•Real Time Systems Hypervisior

Note

The Intel®Whisky Lake SoC supports only 64-bit operating systems.

2.3 Mechanical Dimensions

The conga-IC370 has the following dimensions:

•lenght of 170 mm

•width of 170 mm

•height of 20.6 mm (16 mm top-side, 1.6 mm PCB and 3 mm bottom-side)

2.4 Supply Voltage Power

•12–24V DC ± 5 %

2.5 Power Consumption

The power consumption values were measured using the following test setup:

•Input voltage +12V

•conga-IC370 SBC

•conga-IC370 CSA

•Microsoft Windows 10 (64 bit)

Note

The CPU was stressed to its maximum workload with the Intel®Thermal Analysis Tool.

Table 7 Measurement Description

The power consumption values were recorded during the following system states:

System State Description Comment

S0: Minimum value Lowest frequency mode (LFM) with minimum core voltage during

desktop idle

S0: Maximum value Highest frequency mode (HFM/Turbo Boost). The CPU was stressed to its maximum frequency

S0: Peak current Highest current spike during the measurement of “S0: Maximum

value”. This state shows the peak value during runtime

Consider this value when designing the system’s power supply, to ensure

sufﬁcient power is supplied during worst case scenarios

S3 SBC is powered by 12 V

S5 SBC is powered by 12 V

Note

1. The fan and SATA drives were powered externally.

2. All other peripherals except the LCD monitor were disconnected before measurement.

Table 8 Power Consumption Values

The table below provides additional information about the conga-IC370 power consumption. The values were recorded at various operating

mode.

Part

No.

Memory

Size

H.W

Rev.

BIOS

Rev.

OS (64 bit) CPU Current (A)

Variant Cores Freq. /Max. Turbo S0: Min S0: Max S0: Peak S3 S5 S5e

053001 2 x 4 GB A.0 R000 Windows 10 Intel®Core™ i7-8665UE 4 1.7 / 4.4 GHz 0.39 2.56 5.82 0.06 0.05 0.001

053002 2 x 4 GB A.0 R000 Windows 10 Intel®Core™ i5-8365UE 4 1.6 / 4.1 GHz 0.36 2.56 3.97 0.05 0.05 0.001

053003 2 x 4 GB A.0 R000 Windows 10 Intel®Core™ i3-8145UE 2 2.2 / 3.9 Ghz 0.34 2.43 3.50 0.06 0.05 0.001

053005 2 x 4 GB A.0 R000 Windows 10 Intel®Celeron®4305UE 2 2.0 / N.A GHz 0.37 1.41 1.47 0.05 0.001

Note

With a fast input voltage rise time, the inrush current may exceed the measured peak current.

2.6 Supply Voltage Battery Power

Table 9 CMOS Battery Power Consumption

RTC @ Voltage Current

-10oC3V DC 2.17 µA

20oC3V DC 2.76 µA

70oC3V DC 7.87 µA

Note

1. Do not use the CMOS battery power consumption values listed above to calculate CMOS battery lifetime.

2. Measure the CMOS battery power consumption in your customer speciﬁc application in worst case conditions (for example, during high

temperature and high battery voltage).

3. Consider also the self-discharge of the battery when calculating the lifetime of the CMOS battery. For more information, refer to application

note AN9_RTC_Battery_Lifetime.pdf on congatec AG website at www.congatec.com/support/application-notes.

4. We recommend to always have a CMOS battery present when operating the conga-IC370

2.7 Environmental Speciﬁcations

Temperature Operation: 0° to 60°C Storage: -20° to +70°C

Humidity Operation: 10% to 90% Storage: 5% to 95%

Note

The above operating temperatures must be strictly adhered to at all times. Humidity speciﬁcations are for non-condensing conditions.

3 Block Diagram

conga-IC370

Thin Mini-ITX Single Board Computer

Ethernet 1Gb

USB C Controller

CODEC ALC888S

Beeper

LPC UART

CAN Controller

Tranceiver

RTC Battery

M.2 2230

Key-E

M.2

2242/3042/2280

Key-B

PCIe

miniPCIe

Full/Half SIM Card

RS422 / RS485 RS232

RS232 RS232

CAN

I2C/SMB

RS422 / RS485 RS232

DP internal

8x GPIO

Front Panel 2x FAN

Dig. MICInt. Speaker

2x USB 2.0

eDP

Monitor OFF Intrusion

LVDS Backlight

USB 3.1 Frontpanel Key A

S/PDIF Front Panel HD Audio

microSD card

DC In

Ethernet 2.5Gb

Optional

Agenda

Internal I/O

External I/O

congatec

Board

Controller

Generation

Ethernet 2.5 Gb

Ethernet 1 Gb

DC In

Audio

Line/HPout Audio

Mic IN

DP++ DP++

USB 3.1

Gen 2

USB 2.0

TPM

MUX

eDP to LVDS

Flash

SATA 0 SATA 1 SATA Power

MUX

SPI

SM Bus

I2C

2x DDR4 2400

SO-DIMM

up to 32 GB each

Tranceiver Tranceiver

Tranceiver

Repeater

Tranceiver Tranceiver

Tranceiver

I2C/SMB (5V)

MGMNT

8th Gen. Intel®Core™

“Whiskey Lake”

SOC ULT Processor

eDP

DDR4

2x SATA

PCIe

SDXC

PCIe

CNVio

USB 2.0

2x USB 2.0

2x USB 3.1 Gen 2

DDPB

DDPC

4x USB 2.0

HDA

SPI

MNGMT LPCSM Bus

PCIe / SATA

USB 2.0

4x PCIe

USB 2.0

PCIe

4 Cooling Solution

The conga-IC370 supports the cooling solutions listed in the table below. The dimensions of the cooling solutions are shown in the sub-sections.

All measurements are in millimeters.

Table 10 Cooling Solution Variants

Cooling Solution Part No. Description

1 congatec CSA 052252 Active cooling solution with integrated heatsink and congatec retention frame (PN: 052254)

2 Custom cooling solution N.A Custom cooling solution in combination with the congatec retention frame

Note

1. The retention frame acts as mounting backplate and board reinforcement.

2. We recommend a maximum torque of 0.4 Nm for SBC mounting screws and 0.5 Nm for CPU mounting screws.

3. With passive or custom cooling solution, the end user must make sure that adequate air ﬂow is maintained.

4. The congatec conga-IC370 cooling solutions support maximum TDP of 15 W. For applications with higher TDP, you need a custom cooling

solution or additional cooling components.

Caution

1. The congatec heatspreaders/cooling solutions are tested only within the commercial temperature range of 0° to 60°C. Therefore, if your

application that features a congatec heatspreader/cooling solution operates outside this temperature range, ensure the correct operating

temperature of the SBC is maintained at all times. This may require additional cooling components for your ﬁnal application’s thermal

solution.

2. For adequate heat dissipation, use the mounting holes on the cooling solution to attach it to the SBC. Apply thread-locking ﬂuid on

the screws if the cooling solution is used in a high shock and/or vibration environment. To prevent the standoff from stripping or cross-

threading, use non-threaded carrier board standoffs to mount threaded cooling solutions.

3. For applications that require vertically-mounted cooling solution, use only coolers that secure the thermal stacks with ﬁxing post. Without

the ﬁxing post feature, the thermal stacks may move.

4. Do not exceed the recommended maximum torque. Doing so may damage the SBC.

4.1 CSA Dimensions

250 ± 5

20.8

16.5 85

M3 screws for attaching cooling

solution to retention frame

Table of contents

Other Congatec Single Board Computer manuals

Congatec

Congatec Com Express conga-TC570 User manual

Congatec

Congatec conga-SMX8 User manual

Congatec

Congatec COM Express conga-TS570 User manual

Congatec

Congatec COM Express conga-TC570r User manual

Congatec

Congatec COM Express conga-TS87 Series User manual

Congatec

Congatec conga-JC370 User manual

Congatec

Congatec conga-STDA4 User manual

Congatec

Congatec COM Express conga-TS370 User manual

Popular Single Board Computer manuals by other brands

Boser

Boser HS-6011L manual

Pentium

Pentium ROCKY-548TX manual

Asus

Asus AAEON PICO-V2K4 user manual

VIA Technologies

VIA Technologies VAB-800 user manual

Seco

Seco SBC-C41-pITX user manual

Seco

Seco i-PAN7 manual

Innodisk

Innodisk ASCI-020 user manual

OLIMEX

OLIMEX A10-OLINUXINO-LIME-4GB user manual

BCM

BCM ESM-APLM user manual

Asus

Asus AAEON de next-V2K8 user manual

Wintech

Wintech WCP-640 user manual

Embedian

Embedian MXM-6410 user manual

Digi

Digi JACKRABBIT BL1800 user manual

SMART Embedded Computing

SMART Embedded Computing PCIE-6001 quick start guide

Wandboard

Wandboard Solo user guide

ABA

ABA VMICPCI-7055 Hardware reference manual

Global American Inc.

Global American Inc. 3301320 user manual

Solectron

Solectron FORCE SPARC/CPU-5V installation guide

Congatec conga-IC370 User manual

Popular Single Board Computer manuals by other brands