Contec AD16-64(LPCI)LA User manual

PC-HELPER
High-Resolution Analog Input Board
for Low Profile PCI
AD16-64(LPCI)LA
User’s Guide
CONTEC CO., LTD.

AD16-64(LPCI)LA i
Check Your Package
Thank you for purchasing the CONTEC product.
The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing
items, contact your retailer.
Product Configuration List
- Board [AD16-64(LPCI)LA] …1
- First step guide … 1
- Disk *1 [API-PAC(W32)] …1
- Standard-sized bracket…1
- Warranty Certificate …1
- Serial Number Label …1
*1 The bundled disk contains the driver software and User’s Guide (this guide)
Board
First step guide
First step guide
Serial Number Label
Warranty Certificate
Warranty
Certificate
Disk
[API-PAC(W32)]
Standard size bracket

ii AD16-64(LPCI)LA
Copyright
Copyright 2005 CONTEC CO., LTD. ALL RIGHTS RESERVED
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this
document. The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
Trademarks
MS, Microsoft, Windows and Windows NT are trademarks of Microsoft Corporation. Other brand and
product names are trademarks of their respective holder.

AD16-64(LPCI)LA iii
Table of Contents
Check Your Package.................................................................................................................................... i
Copyright .....................................................................................................................................................ii
Trademarks ..................................................................................................................................................ii
Table of Contents .......................................................................................................................................iii
1. BEFORE USING THE PRODUCT 1
About the Board .......................................................................................................................................... 1
Features................................................................................................................................................. 1
Support Software.................................................................................................................................. 2
Cable & Connector (Option)............................................................................................................ 3
Accessories (Option) ........................................................................................................................ 3
Customer Support........................................................................................................................................ 4
Web Site................................................................................................................................................ 4
Limited Three-Years Warranty.................................................................................................................. 4
How to Obtain Service................................................................................................................................ 4
Liability........................................................................................................................................................ 4
Safety Precautions....................................................................................................................................... 5
Safety Information............................................................................................................................... 5
Handling Precautions........................................................................................................................... 6
Environment......................................................................................................................................... 7
Inspection.............................................................................................................................................. 7
Storage .................................................................................................................................................. 7
Disposal ................................................................................................................................................ 7
2. SETUP 9
What is Setup?............................................................................................................................................. 9
Using the Board under Windows Using the Driver Library API-PAC(W32)................................9
Using the Board under Windows Using Software Other than the Driver Library API-
PAC(W32)............................................................................................................................................ 9
Using the Board under an OS Other than Windows.......................................................................10
Step 1 Installing the Software ..................................................................................................................11
Which Driver to Use.......................................................................................................................... 11
Starting the Install Program ..............................................................................................................12
Step 2 Setting the Hardware.....................................................................................................................14
Replacing the Bracket........................................................................................................................ 14
Parts of the Board and Factory Defaults..........................................................................................15
Setting the Board ID ..........................................................................................................................15
Plugging the Board ............................................................................................................................16
Step 3 Installing the Hardware.................................................................................................................17
Turning on the PC.............................................................................................................................. 17

iv AD16-64(LPCI)LA
When Using API-AIO(WDM)............................................................................................................. 17
Step 4 Initializing the Software................................................................................................................ 19
Step 5 Checking Operations with the Diagnosis Program.............................................................21
What is the Diagnosis Program? ...................................................................................................... 21
Check Method.................................................................................................................................... 21
Using the Diagnosis Program........................................................................................................... 22
Setup Troubleshooting.............................................................................................................................. 25
Symptoms and Actions...................................................................................................................... 25
If your problem cannot be resolved.................................................................................................. 25
3. EXTERNAL CONNECTION 27
How to connect the connectors................................................................................................................ 27
Connector shape................................................................................................................................. 27
Connector Pin Assignment................................................................................................................ 29
Analog Input Signal Connection.............................................................................................................. 37
Single-ended Input............................................................................................................................. 37
Differential Input ............................................................................................................................... 38
Digital I/O signals, Counter signals and Control signals Connection.................................................. 39
4. FUNCTIONS 41
Analog Input Function.............................................................................................................................. 41
1. Setting the Conversion Conditions .............................................................................................. 42
2. Starting/Stopping Operation......................................................................................................... 49
3. Monitoring the Status and Acquiring Data.................................................................................. 50
4.Reset................................................................................................................................................. 53
Counter Function....................................................................................................................................... 54
1. Setting the Operating Conditions................................................................................................. 54
2. Starting/Stopping Operation......................................................................................................... 55
3. Monitoring the Status and Acquiring Data.................................................................................. 55
4.Reset................................................................................................................................................. 56
Digital Input Function............................................................................................................................... 57
Digital Output Function............................................................................................................................ 58
5. ABOUT SOFTWARE 59
Bundled disk Directory Structure............................................................................................................ 59
About Software for Windows .................................................................................................................. 60
Accessing the Help File..................................................................................................................... 60
Using Sample Programs.................................................................................................................... 61
Usage of Utility Program.................................................................................................................. 63
Uninstalling the Driver Libraries ..................................................................................................... 66
About Software for Linux ........................................................................................................................ 67
Driver Software Install Procedure.................................................................................................... 67

AD16-64(LPCI)LA v
Accessing the Help File.....................................................................................................................68
Using Sample Programs ....................................................................................................................68
Uninstalling the driver.......................................................................................................................68
6. ABOUT HARDWARE 69
For detailed technical information...........................................................................................................69
Hardware specification .............................................................................................................................69
Block Diagram........................................................................................................................................... 71
Control Signal Timings............................................................................................................................. 72
Control Signal Timings for Analog Input........................................................................................72
Control Signal Timings for Analog Output.....................................................................................73
About Calibration......................................................................................................................................74

vi AD16-64(LPCI)LA

1. Before Using the Product
AD16-64(LPCI)LA 1
1. Before Using the Product
About the Board
The < AD16-64(LPCI)LA > is a PCI bus compatible interface board with 64 high-precision, 16-bit
analog input channels, digital input and output channels (4 channels each), and a 32-bit counter
(1 channel)
This product supports a Low Profile size slot and, if replaced with the supplied bracket, supports a
standard size slot, too. The board can build a space-saving PC into a cost-effective analog input
system.
Using the bundled API function library package [API-PAC(W32)], you can create Windows application
software for this board in your favorite programming language supporting Win32 API functions, such as
Visual Basic or Visual C++.
It can also collect data easily without a program when the data logger software [C-LOGGER] stored on
the attached disk is used. With plug-ins for the dedicated libraries, the board also supports MATLAB
and LabVIEW.
Features
Multi channel analog input
Capable of analog input of 64 single-ended input channels or 32 differential input channels.
The selection of the single-ended input and the difference input can be set with software.
Rich set of basic functions
Compact system providing high-precision analog inputs.
Equipped with analog inputs, analog input control signals (TTL level, 3ch), digital inputs (TTL level,
4ch), digital outputs (TTL level, 4ch), and counter (TTL level 32-bit, 1ch)
Substantial control functions
Capable of analog input either time-based mode or external-signal synchronous mode.
Filter function facilitating external signal connection
The external control signals for analog input incorporate a digital filter to prevent problems such as
chattering.
Software-based calibration function
Calibration of analog input can be all performed by software. Apart from the adjustment information
prepared before shipment, additional adjustment information can be stored according to the use
environment.
Exchangeable Low Profile size and standard size slots
Support for both of Low Profile size and standard size slots (interchangeable with a bundled bracket).
Supported to the data logger software [C-LOGGER]
Supporting the data logger software [C-LOGGER] that enables the graph display of recorded signal
data, file saving, and dynamic transfer to the spreadsheet software program “Excel”

1. Before Using the Product
2AD16-64(LPCI)LA
Plug-ins for the dedicated libraries, the board also supports MATLAB and LabVIEW.
We offer a dedicated library [ML-DAQ], which allows you to use this product on MATLAB by the
MathWorks as well as another dedicated library [VI-DAQ], which allows you to use the product on
LabVIEW.
These dedicated libraries are available, free of charge (downloadable), on our web site.
Support Software
You should use CONTEC support software according to your purpose and development environment.
Windows version of analog I/O driver API-AIO(WDM)
[Stored on the bundled disk driver library API-PAC(W32)]
The API-AIO(WDM) is the Windows version driver library software that provides products in the form of Win32 API
functions (DLL). Various sample programs such as Visual Basic and Visual C++, etc and diagnostic program
*1useful for checking operation is provided.
For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site.
Linux version of analog I/O driver API-AIO(LNX)
[Stored on the bundled disk driver library API-PAC(W32)]
The API-AIO(LNX) is the Linux version driver software which provides device drivers (modules) by shared library
and kernel version. Various sample programs of gcc are provided.
For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site.
Data Logger Software C-LOGGER
[Stored on the bundled disk driver library API-PAC(W32)]
C-LOGGER is a data logger software program compatible with our analog I/O products. This program enables the
graph display of recorded signal data, zoom observation, file saving, and dynamic transfer to the spreadsheet software
“Excel”. No troublesome programming is required.
For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site.
Data Acquisition library for MATLAB ML-DAQ
(Available for downloading (free of charge) from the CONTEC web site.)
This is the library software which allows you to use our analog I/O device products on MATLAB by the MathWorks.
Each function is offered in accordance with the interface which is integrated in MATLAB’s Data Acquisition Toolbox.
For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site.
Data acquisition VI library for LabVIEW VI-DAQ
(Available for downloading (free of charge) from the CONTEC web site.)
This is a VI library to use in NationalInstruments LabVIEW.
VI-DAQ is created with a function form similar to that of LabVIEW's Data Acquisition VI, allowing you to use
various devices without complicated settings.
For more details on the library and download of VI-DAQ, please visit the CONTEC’s Web site.

1. Before Using the Product
AD16-64(LPCI)LA 3
Cable & Connector (Option)
Shielded cables with two-ended connector for 68-pin half-pitch connector
: PCB68PS-0.5P (0.5m)
: PCB68PS-1.5P (1.5m)
Shielded cables with single-ended connector for 68-pin half-pitch connector
: PCA68PS-0.5P (0.5m)
: PCA68PS-1.5P (1.5m)
68/96-pin conversion shielded cable for analog input/output
: ADC-68M/96F (0.5m)
* Two sets of cables are required to use both connector CNA and CNB.
Accessories (Option)
Screw Terminal (M2.5 x 96P) : DTP-64(PC) *1*3
Screw Terminal (M3 x 68P) : EPD-68A *2*3*4
Screw Terminal (M3 x 96P) : EPD-96A *1*3*4
Screw Terminal (M3.5 x 96P) : EPD-96 *1*3
BNC Terminal Unit (analog input 32ch) : ATP-32F *1*3
BNC Terminal Unit (analog input 8ch) : ATP-8 *1*3*5
*1 ADC-68M/96F optional cable is required separately.
*2 PCB68PS-0.5P or PCB68PS-1.5P optional cable is required separately.
*3 Two sets of cables are required to use both connector CNA and CNB.
*4 “Spring-up” type terminal is used to prevent terminal screws from falling off.
*5 Can be used in CNA channels 0 - 7 or CNB channels 32 - 39.
* For details on the range channels available to each terminal panel, see Figure 3.2 "Connecting
example of option".
* Check the CONTEC’s Web site for more information on these options.

1. Before Using the Product
4AD16-64(LPCI)LA
Customer Support
CONTEC provides the following support services for you to use CONTEC products more efficiently
and comfortably.
Web Site
https://www.contec.com/
Latest product information
CONTEC provides up-to-date information on products.
CONTEC also provides product manuals and various technical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.
Limited Three-Years Warranty
CONTEC products are warranted by CONTEC CO., LTD. to be free from defects in material and
workmanship for up to three years from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the
original invoice and a Return Merchandise Authorization to the distributor or the CONTEC group
office, from which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original boards. The warranty is not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonableuse, or if the original invoice is not included, in
which case repairs will be considered beyond the warranty policy.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the
warrantor be liable for any incidental or consequential damages due to such defect or consequences that
arise from inexperienced usage, misuse, or malfunction of this device.

1. Before Using the Product
AD16-64(LPCI)LA 5
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting
in injury or death and the destruction of equipment and resources. Understand the meanings of these
labels to operate the equipment safely.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
DANGER
WARNING
CAUTION

1. Before Using the Product
6AD16-64(LPCI)LA
Handling Precautions
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
- There are switches and jumpers on the board that need to be set in advance. Be sure to check these
before installing the board.
- Only set the switches and jumpers on the board to the specified settings.
Otherwise, the board may malfunction, overheat, or cause a failure.
- Do not strike or bend the board.
Otherwise, the board may malfunction, overheat, cause a failure or breakage.
- Do not touch the board's metal plated terminals (edge connector) with your hands.
Otherwise, the board may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.
- Do not plug or unplug the cables which are connected to the board while the PC or expansion unit is
still turned on.
Otherwise, the board may malfunction, overheat, or cause a failure.
Be sure that the personal computer power is turned off.
- Do not install or remove the board to or from the slot while the computer's power is turned on.
Otherwise, the board may malfunction, overheat, or cause a failure.
Be sure that the personal computer or the I/O expansion unit power is turned off.
- Make sure that your PC or expansion unit can supply ample power to all the boards installed.
Insufficiently energized boards could malfunction, overheat, or cause a failure.
- The specifications of this product are subject to change without notice for enhancement and quality
improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
- Regarding “CE EMC Directive Notice”.
Please connect the Interface Connector with a shielded cable to meet the mentioned standard above.
DANGER
CAUTION

1. Before Using the Product
AD16-64(LPCI)LA 7
Environment
Use this product in the following environment. If used in an unauthorized environment, the board may
overheat, malfunction, or cause a failure.
Operating temperature
0 - 50°C
Operating humidity
10 - 90%RH (No condensation)
Corrosive gases
None
Floating dust particles
Not to be excessive
Inspection
Inspect the product periodically as follows to use it safely.
Storage
When storing this product, keep it in its original packing form.
(1) Put the board in the storage bag.
(2) Wrap it in the packing material, then put it in the box.
(3) Store the package at room temperature at a place free from direct sunlight, moisture, shock,
vibration, magnetism, and static electricity.
Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and
municipal ordinances.
- Check that the bus connector
of the board and its cable have
been plugged correctly.
- Check that the board has
no dust or foreign matter adhering.
- The gold-plated leads of the bus connector
have no stain or corrosion.

1. Before Using the Product
8AD16-64(LPCI)LA

2. Setup
AD16-64(LPCI)LA 9
2. Setup
This chapter explains how to set up the board.
What is Setup?
Setup means a series of steps to take before the product can be used.
Different steps are required for software and hardware.
The setup procedure varies with the OS and applications used.
Using the Board under Windows
Using the Driver Library API-PAC(W32)
This section describes the setup procedure to be performed before you can start developing application
programs for the board using the bundled disk “Driver Library API-PAC(W32)”.
Taking the following steps sets up the software and hardware. You can use the diagnosis program later
to check whether the software and hardware function normally.
Step 1 Installing the Software
Step 2 Setting the Hardware
Step 3 Installing the Hardware
Step 4 Initializing the Software
Step 5 Checking Operations with the Diagnosis Program
If Setup fails to be performed normally, see the “Setup Troubleshooting” section at the end of this
chapter.
Using the Board under Windows
Using Software Other than the Driver Library API-PAC(W32)
For setting up software other than API-PAC(W32), refer to the manual for that software. See also the
following parts of this manual as required.
This chapter Step 2 Setting the Hardware
This chapter Step 3 Installing the Hardware
Chapter 3 External Connection
Chapter 6 About Hardware

2. Setup
10 AD16-64(LPCI)LA
Using the Board under an OS Other than Windows
For using the board under Linux, see the following parts of this manual.
This chapter Step 2 Setting the Hardware
Chapter 3 External Connection
Chapter 5 About Software
Chapter 6 About Hardware
For using the board under an OS other than Windows and Linux, see the following parts of this manual.
This chapter Step 2 Setting the Hardware
Chapter 3 External Connection
Chapter 6 About Hardware

2. Setup
AD16-64(LPCI)LA 11
Step 1 Installing the Software
This explains how to install the driver library.
Before installing the hardware on the PC, install the driver library from the API-PAC(W32)
disk provided with the board.
The following description assumes the operating system as Windows XP. Although some user
interfaces are different depending on the OS used, the basic procedure is the same.
Which Driver to Use
CONTEC has two analog I/O drivers: “API-AIO(WDM)” and “API-AIO(98/PC)”.
API-AIO(WDM) is a new driver for analog I/O under Windows.
This driver was developed to be easier to use and to provide additional functions above those provided
by the previous API-AIO(98/PC) driver.
Please use the API-AIO(WDM) with this board. API-AIO(98/PC) is not supported.

2. Setup
12 AD16-64(LPCI)LA
Starting the Install Program
(1) Load the bundled disk [API-PAC(W32)] on your PC.
(2) The API-PAC(W32) Installer window appears automatically.
If the panel does not appear, run (drive letter):\AUTORUN.exe.
(3) Click on the [Install the drivers] button.
Before installing the software in Windows XP, 2000, or NT, log in as a user with administrator
privileges.
CAUTION

2. Setup
AD16-64(LPCI)LA 13
API-AIO(WDM)
(1) The following dialog box appears to select “Driver Type” and “Install Type”.
(2) Select the "High Functionality WDM Analog I/O driver".
(3) Click on the [Install] button.
* Clicking the [Details] button displays detailed information about API-AIO(WDM) and
API-AIO(98/PC).
Run the installation
(1) Complete the installation by following the instructions on the screen.
(2) The Readme file appears when the installation is complete.
You have now finished installing the software.