Contec BX220 Series User manual

IPC Series
BOX-PC
for BX220 Series
User’s Manual
CONTEC CO.,LTD.

BX-220 User’s manual i
Check Your Package
Thank you for purchasing the CONTEC product.
The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing items,
contact your retailer.
Product Configuration List
BX-220D-DC700000
[Base Model]
BX-220D-DC7x121x
[OS PreInstallModel]
Name
Pcs.
Pcs.
BOX-PC
1
1
The attachment fittings
2
2
CFast card removal prevention fitting
1
1
USB removal prevention fitting
1
1
USB removal prevention clamp
1
2
DVI-analog RGB conversion adapter
1
1
Washer assembled screw (M3 x 6)
6
6
Washer assembled and cross recessed
hexagonal bolt
(M4 x 10, black)
4 4
Cable clamp
1
2
Power supply
connector complete set
Power connector
1
1
Contact
4
4
Product guide
1
1
IPC Precaution List 1 1
Warranty Certificate
Serial number label
1
1
Royalty consent contract(For OS)
- *1
1
Setup Procedure Document
- *1
1
Recovery Media
- *1
1
*1 Not included in models without OS.
* The user's manual for this product is available as a PDF file through CONTEC’s Web site.
The user's manual provides such information as hardware settings, functions for each component, and BIOS settings.
Refer to it as necessary.

ii BX-220 User’s manual
Product Configuration Image
BOX-PC The attachment fittings Cable clamp USB removal
prevention clamp
Contact
Power connector
Power supply connector
complete set
USB removal
prevention fitting
CFast card removal
prevention fitting
Wacher assembled
screw (M3 x 6)
Wacher assembled and cross
recessed hexagonal bolt
(M4 x 10, black)
Product guide
Product guide
IPC
Precaution
List
IPC Precaution
List
Warranty Certificate
Royalty consent
contract
Setup
Procedure
Document
Setup Procedure
Document
Recovery Media
DVI-Analog RGB
conversion adapter
Warranty
Certificate
Serial number
label
XXXXXXXXXXXXX
XXXXXXXXXXXXX
Royalty
consent
contract
(For OS)
* See the Product Configuration List to check if all the components are included for the specified number of units.
Copyright
Copyright 2015 CONTEC CO., LTD. ALL RIGHTS RESERVED.
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this
document.
The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.

BX-220 User’s manual iii
Trademarks
Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft
and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks
of their respective holder.

iv BX-220 User’s manual

BX-220 User’s manual v
Table of Contents
Check your package.............................................................................................................................i
Copyright ............................................................................................................................................ii
Trademarks.........................................................................................................................................iii
Table of Contents................................................................................................................................v
1. INTRODUCTION 1
About the Product ...............................................................................................................................1
Features ........................................................................................................................................ 2
Supported OS ...............................................................................................................................3
Customer Support................................................................................................................................4
Web Site.......................................................................................................................................4
Limited One-Year Warranty ...............................................................................................................4
How to Obtain Service........................................................................................................................4
Liability...............................................................................................................................................4
Safety Precautions............................................................................................................................... 5
Safety Information ....................................................................................................................... 5
Caution on the BX-220 Series......................................................................................................5
2. SYSTEM REFERENCE 9
Specification........................................................................................................................................9
Power Management Features ............................................................................................................ 11
Power Requirements .........................................................................................................................12
Power Consumption................................................................................................................... 12
Physical Dimensions......................................................................................................................... 13
3. HARDWARE SETUP 15
Before Using the Product for the First Time..................................................................................... 15
Hardware Setup................................................................................................................................. 16
Inserting an Embedded CFast Card............................................................................................ 16
Attaching the CFast Attachment Fittings................................................................................... 17
Attaching the Attachment Fittings ............................................................................................. 17
Attaching the FG........................................................................................................................ 18
Fastening the Cable.................................................................................................................... 19
Installation Requirements........................................................................................................... 20
4. BIOS SETUP 23
Introduction....................................................................................................................................... 23
Starting Setup.................................................................................................................................... 23

vi BX-220 User’s manual
Using Setup.......................................................................................................................................24
Getting Help...............................................................................................................................24
In Case of Problems ...................................................................................................................24
A Final Note About Setup..........................................................................................................24
Main Menu........................................................................................................................................25
Setup Items.................................................................................................................................25
Main ..................................................................................................................................................26
Advanced...........................................................................................................................................27
ACPI Settings.............................................................................................................................28
RAS Configration.......................................................................................................................30
Super IO Configuration..............................................................................................................32
H/W Monitor..............................................................................................................................34
CPU Configuration.....................................................................................................................35
PPM Configuration.....................................................................................................................36
SATA Configuration ..................................................................................................................37
CSM Configuration....................................................................................................................38
USB Configuration.....................................................................................................................39
Chipset...............................................................................................................................................40
North Bridge...............................................................................................................................41
Intel IGD Configuration .............................................................................................................42
LCD Control...............................................................................................................................43
South Bridge Configuration .......................................................................................................44
Azalia HD Audio Configuration ................................................................................................45
Security .............................................................................................................................................47
Secure Boot menu ......................................................................................................................48
Boot Configuration............................................................................................................................49
Save & Exit .......................................................................................................................................50
5. EACH COMPONENT FUNCTION 53
Component Name..............................................................................................................................53
Front View..................................................................................................................................53
Rear View...................................................................................................................................53
System Configuration........................................................................................................................54
Component Function.........................................................................................................................55
LED: POWER, ACCESS, STATUS .......................................................................................55
DC Power Input Connector: DC-IN........................................................................................55
POWER SW...............................................................................................................................56
LINE OUT Interface : LINE OUT..........................................................................................56
MIC IN Interface : MIC ..........................................................................................................56
DVI Interface: DVI-I...............................................................................................................57
Display Port Interface : Display Port.......................................................................................59
USB3.0 Port : USB3.0.............................................................................................................60
USB2.0 Port : USB2.0.............................................................................................................60

BX-220 User’s manual vii
Giga bit-Ethernet: LAN A, B .................................................................................................. 61
CFast Card Connector : CFast1, 2........................................................................................... 62
Serial Port Interface: SERIAL A, B ........................................................................................ 63
RAS Functions ...........................................................................................................................64
General Purpose Input/Output and Remote Power On/Reset..................................................... 66
6. APPENDIX 69
POST Codes...................................................................................................................................... 69
SERIAL I/O Address and Register Function.................................................................................... 72
Watch-Dog-Timer............................................................................................................................. 78
Battery...............................................................................................................................................82
7. LIST OF OPTIONS 83

viii BX-220 User’s manual

1. Introduction
BX-220 User’s manual 1
1. Introduction
About the Product
This product is a fanless computer for embedded applications. It features an Intel Atom processor E3845
chipset. Thanks to a quad-core CPU, simultaneous stable high-speed processing for four applications is
possible with four cores. This CPU also allows for computing power almost four times that of
conventional products in addition to three times the graphics performance, a significant improvement.
Moreover, power consumption has been significantly reduced, resulting in nearly double the power
efficiency compared with the previous generation's architecture.It combines sufficient performance and
low power consumption in a space-saving design that can be installed in spaces only 50-mm thick with
roughly the same area as a paperback book. This "resource-saving PC" helps you design more compact,
energy efficient equipment to reduce running costs and promote energy efficiency.
It has extension interfaces such as DVI-I, Display Port, 1000BASE-T, USB 3.0, and serial. It employs a
CFast card for storage and is fanless to ensure a totally spindleless design that simplifies maintenance.
In addition, this product is equipped with a proprietary extended RAS*1 function independent of the main
computer functions. This feature provides various functions to increase system reliability by
automatically restarting the system when detecting errors such as frozen programs, operating system
startup faults, and a rise in internal temperature, and by saving detailed logs of the occurrence of errors,
which can be useful in failure analysis.
Embedded-type CPU have been adopted. The use of readily available parts ensures the ease of the use of
the product. In addition, the use of Contec-customized BIOS allows support to be provided at the BIOS
level.
This product is available in the following 5 models:
- Base model with Intel Atom Processor E3845 1.91GHz
BX-220D-DC700000 (Memory 4GB, ECC, without OS, without CFast)
- OS-installed model with Intel Atom Processor E3845 1.91GHz
BX-220D-DC731211 (Memory 4GB, ECC, Windows Embedded Standard 7 32bit (Japanese version),
CFast Card (SLC) 16GB)
BX-220D-DC731212 (Memory 4GB, ECC, Windows Embedded Standard 7 32bit (English version),
CFast Card (SLC) 16GB)
BX-220D-DC761211 (Memory 4GB, ECC, Windows Embedded Standard 7 32bit (Japanese),
CFast Card (MLC) 32GB)
BX-220D-DC761212 (Memory 4GB, ECC, Windows Embedded Standard 7 32bit (English)
CFast Card (MLC) 32GB)
*1 Reliability Availability and Serviceability: Support functions for stable system operation.

1. Introduction
2BX-220 User’s manual
Features
- Contributing to reduction of running cost and promotion of energy efficiency
It adopts the low-power platform with Intel®Atom(TM) Processor E3845 that realizes lower power
consumption while ensuring sufficient performance.
- Contributing to compact device design. Ultra-small PC is roughly the same area as a paperback book
It is the smallest [178 (W) x 115 (D) x 29 (H)] and lightest [800 g] PC in the series, and can be installed
almost anywhere.
Can be installed in spaces only 50-mm thick with roughly the same area as a paperback book. It largely
serves downsizing of your equipment, fits any area with the aestheticness kept.
- Slitless/fanless design that reduces maintenance work
This product's spindleless design eliminates the heat dissipating slit and CPU fan and adopts CFast card
for the storage. There is no need to worry about the intrusion of dust or foreign objects, and the use of
parts that degrade over time is minimized to facilitate maintenance.
- Remote power management function to reduce operation tasks
Supports system startup by external device over network (Wake-on-LAN), by general purpose input
(power on by GPI), and by modem reception (power on by ring). It encourages significant labor saving in
operation.
- Major types of peripherals are supported with rich interfaces including the two CFast card slots
It has a variety of extended interface such as DVI-I x 1, Display Port x 1, 1000BASE-T x 2, USB3.0 x 1,
serial (RS-232C) x 2.
It has two CFast card slots (one built into main unit), providing the ability to separate data from the
operating system, as well as the convenience of being able to use one slot for system startup and the other
for maintenance or for taking home system logs or collected data.
- Built-in monitoring function for improved reliability of industrial equipment
The built-in sub-CPU for monitoring offers the ability to save failure logs documenting such information
as start-up failures, abnormal temperatures, abnormal OS operation, and recording media swapped while
powered up, as well as the ability to restart the OS or the device. Recording the power-on time and the
operation time allows for proactive predictions of malfunctions due to parts having reached their service
life. This ability makes it possible to construct stable and highly reliable industrial systems.
- Falling-off prevention tools and fixing clamps provided to avoid trouble caused by disconnected cable
This product stays trouble-free, being equipped with USB removal prevention fitting and cable clamp for
connectors with no locking mechanism, such as USB cable, and with hardware to properly mount and
avoid falling out of CFast card.

1. Introduction
BX-220 User’s manual 3
- Safety design required for embedded applications
For Windows Embedded Standard installed model, it is possible to use the EWF*2 function of OS. It is
designed for safety required for embedding purpose, for example, prohibiting unwanted writing to the CF
card with EWF function will relieve the concern about the writing limits to the CF card and prevent an
unintentional system alteration.
*2 EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that protects the disk from being actually written
by redirecting the writing to RAM.
- A wide range of power supplies (10.8 - 31.2VDC) supported
As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power
environments. The separately available AC adapter adds support for 100VAC power.
Supported OS
- Windows Embedded Standard 7 32bit Japanese
- Windows Embedded Standard 7 32bit English

1. Introduction
4BX-220 User’s manual
Customer Support
CONTEC provides the following support services for you to use CONTEC products more efficiently and
comfortably.
Web Site
Japanese http: //www.contec.co.jp/
English http: //www.contec.com/
Chinese http: //www.contec.com.cn/
Latest product information
CONTEC provides up-to-date information on products.
CONTEC also provides product manuals and various technical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.
Limited One-Year Warranty
CONTEC products are warranted by CONTEC CO., LTD. to be free from defects in material and
workmanship for up to one year from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the original
invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office, from
which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original products. The warranty is not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in
which case repairs will be considered beyond the warranty policy.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be
liable for any incidental or consequential damages due to such defect or consequences that arise from
inexperienced usage, misuse, or malfunction of this device.

1. Introduction
BX-220 User’s manual 5
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these labels
to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Caution on the BX-220 Series
Handling Precautions
WARNING
- Always check that the power supply is turned off before connecting or disconnecting power cables.
- Do not modify the product.
- Always turn off the power before inserting or removing circuit boards or cables.
- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other
applications that require a very high level of reliability. Do not use the product in such applications.
- If using this product in applications where safety is critical such as in railways, automotive, or
disaster prevention or security systems, please contact your retailer.
- Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion.
- For battery replacement, contact your retailer as it must be performed as a process of repair.
- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws
and municipal ordinances. For details on replacing the battery, refer to the appendix.

1. Introduction
6BX-220 User’s manual
CAUTION
- Do not use or store this product in a location exposed to high or low temperature that exceeds range
of specification or susceptible to rapid temperature changes.
Example: - Exposure to direct sun
- In the vicinity of a heat source
- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this
product with its interior penetrated by water or any other fluid or conductive dust. If this product
must be used in such an environment, install it on a dust-proof control panel, for example.
- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of
specification.
- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such
products will cause this product to malfunction.
- Do not use or store this product in the presence of chemicals.
- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or
discoloration of the paint.
- This product’s case may become hot. To avoid being burned, do not touch that section while this
product is in operation or immediately after turning off the power. Avoid installation in a location
where people may come into contact with that section.
- CONTEC does not provide any guarantee for the integrity of data on CFast.
- Always remove the power cable from the power outlet before mounting or removing an expansion
board and before connecting or disconnecting a connector.
- Always remove the power cable from the power outlet before connecting or disconnecting a
connector.
- To prevent corruption of files, always shutdown the OS before turning off this product.
- CONTEC reserves the right to refuse to service a product modified by the user.
- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power
cord immediately and contact your retailer.
- To connect with peripherals, use a grounded, shielded cable.
- The CFast card connector doesn't support hot plug. The pulling out opening of the CFast card cannot
be done in the state of power supply ON. Please neither pulling out opening of CFast in the state of
power supply ON of this product nor come in contact with CFast. This product may malfunction or
cause a failure.
- If you use any other CFast than our CFast, we can not guarantee this product’s specification. When
you newly select CFast for this product, you should read “Chapter 7” at first. If you select
unpreferable CFast, the system may work out of order.
- Component Life:
(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.
The backup time at a temperature of 25°C with the power disconnected is 10 years or
more.
(2) CFast --- Windows Embedded Standard installed model uses a CFast card in the OS storage area.
The estimated failure rate is 1 every 60,000 rewrites for SLC models and 1 every 2000
rewrites for MLC models
* Replacement of expendables is handled as a repair (there will be a charge).
* The service life for consumable parts are reference values and are not guaranteed values.
* This product's specifications allow the device to be rebooted from the BIOS screen during startup.
This has no effect on operation after the OS boots

1. Introduction
BX-220 User’s manual 7
FCC PART15 Class A Notice
This equipment has been testedand foundtocomply with the limitsfor a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference at his own expense.
NOTE
Change or modifications not expressly approved the manufacturer can void the user's authority to
operate this equipment.
WARNING TO USER

1. Introduction
8BX-220 User’s manual

2. System Reference
BX-220 User’s manual 9
2. System Reference
Specification
Table 2.1. Functional Specification < 1 / 2 >
Model BX-220D-DC7xxxxx
CPU Intel® Atom™ Processor E3845 1.91GHz
BIOS BIOS (mfd. by AMI)
Memory 4GB, 204pin SO-DIMM socket x 1, PC3-10600(DDR3L 1333) ECC
Graphic Intel® HD Graphics (built-in CPU)
System
resolution
Analog RGB 640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors, ReduceBlanking)
DVI-D 640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors, ReduceBlanking)
Display Port 640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors, ReduceBlanking)
Audio HD Audio compliant, LINE OUT x 1, MIC IN x 1
CFast card slot 2 slot, CFast CARD Type I x 2 bootable
BX-220D-DC73121x: Built-in CFast card slot (SLC) (16GB, 1 partition) *1
BX-220D-DC76121x: Built-in CFast card slot (MLC) (32GB, 1 partition) *1
Other models: none
LAN *2 Intel I210IT Controller
1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)
USB USB 3.0 compliant 1 port
USB 2.0 compliant 2 port
Serial I/F RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male)
Baud rate : 50 - 115,200bps
RS-422/485 (general-purpose) 1port, Baud rate : 50 - 115,200bps
RAS WDT: Software programmable, 1sec - 255sec (Time up allows reset, interrupt, or external
output)
Remote reset: Input signal from external device
General-purpose I/O Photocoupler insulation inputs/outputs (3 of each)
(One output used for WDT external output, one input switched between remote reset or
remote power on.)
Hardware monitoring Monitoring CPU temperature, power voltage
RTC/CMOS Lithium backup battery life: 10 years or more.
The real-time clock is accurate within ±3 minutes (at 25°C) per month
Power Management Power management setup via BIOS, Power On by Ring / Wake On LAN,
Supports PC98/PC99 ACPI Power management
*1: The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from
OS might be displayed fewer than an actual value.

2. System Reference
10 BX-220 User’s manual
Table 2.1. Functional Specification < 2 / 2 >
Model
BX-220D-DC7xxxxx
Interface
Display
DVI-I x 1 (29pin DVI-I connector), Display Port x1
Audio LINE OUT : 3.5φ Stereo mini jack, Full-scale output level 1.4Vrms(Typ.)
MIC IN : 3.5φ Stereo mini jack, Full-scale input level 1.4Vrms(Typ.)
CFast card slot 2 slot, CFast CARD Type I x 2, bootable
BX-220D-DC700000 : -,
BX-220D-DC73121x : Built-in CFast card slot contains a CFast card(SLC) .
(16GB, 1 partition)*1
BX-220D-DC76121x : Built-in CFast card slot contains a CFast card(MLC) .
(32GB, 1 partition)*1
LAN *2 2 port (RJ-45 connector)
USB USB3.0 compliant 1port (TYPE-A connector x1)
USB2.0 compliant 1port (TYPE-A connector x2)
RS-232C
2 port (9pin D-SUB connector [male])
RS-422/485/
General-purpose I/O /
RAS
1 port (15pin D-SUB connector [femaie])
Power supply
Rated input voltage 12 - 24VDC *3
Range of input
voltage
10.8 - 31.2VDC
Power consumption 12V 2.6A, 24V 1.5A
External device power
supply capacity
CFast card slot : 3.3V : 1A(500mAx2)
USB3.0 I/F : +5V : 0.9A (900mAx1)
USB2.0 I/F : +5V : 1A (500mAx2)
Physical dimensions
(mm)
178 (W) x 115(D) x 29(H) (No protrusions)
Weight
About 0.8kg (Excluding attachment fittings)
*2: If you use the 1000BASE-T, be careful of the operating temperature.
For more details on this, refer to chapter3, Installation Requirements.
*3: Use a power cable shorter than 3m.

2. System Reference
BX-220 User’s manual 11
Table 2.2. Installation Environment Requirements
Model BX-220D-DC7xxxxx
Ambient
specifications
Operating temperature
*4 0 - 50°C(When using 1000BASE-T : 0 - 45°C)
Storage temperature
-10 - 60°C
Humidity 10 - 90%RH (No condensation)
Floating dust particles Not to be excessive
Corrosive gases
None
Line-noise
resistance
Line noise AC line / ±2kV *5,
Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
electricity
resistance
Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G
60 min. each in x, y, and z directions
(JIS C60068-2-6compliant, IEC68-2-6-compliant)
Impact resistance 100G, half-sine shock for 6 ms in x, y, and z directions
(JIS C0041-compliant, IEC68-2-27-compliant)
Grounding
Class D grounding, SG-FG / continuity
*4 : For more details on this, please refer to chapter 3, “Installation Requirements”.
*5 : When AC adapter “ACAP19-01” is used.
Power Management Features
- Support both ACPI (Advanced Configuration and Power Interface) .
- ACPI v2.0 compliant
- Hardware automatic wake-up