Contec PT-S959 Series User manual

PANEL-PC for S Series
PT-S959 Series
S959W10 Series
User’s Manual
CONTEC CO.,LTD.

PT-S959W10 User’s manual i
Check Your Package
Thank you for purchasing the CONTEC product.
The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing items, contact your
retailer. If you use driver & utility software set, download it form the CONTEC's Web site.
Product Configuration List
PT- S959W10
-DC6000 -DC6100
Base model HDD model
Name Pcs. Pcs.
Panel-PC 1 1
CFast card removal prevention fitting 1 1 1
CFast card removal prevention fitting 2 1 1
Screws for attachment HDD 4 4*1
Screws for attachment VESA 4 4
Washer for attachment VESA 4 4
Power supply connector complete set
Power connector 1 1
Contact 4 4
Cable clamp 1 1
DVI-analog RGB conversion adapter 1 1
Product guide (this sheet) 1 1
IPC Precaution List 1 1
Warranty Certificate 1 1
Serial number label 1set 1set
Royalty consent contract None None
Setup Procedure Document None None
Notes on using Windows Embedded Standard None None
Recovery Media None None
*1 It is attached to the main body.
*Please confirm User Manual in a website.

ii PT-S959W10 User’s manual
Product Configuration Image
* See the Product Configuration List to check if all the components are included for the specified number of units.
Copyright
Copyright 2012 CONTEC Co., Ltd. All Rights Reserved.
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC Co., Ltd.
CONTEC Co., Ltd. makes no commitment to update or keep current the information contained in this
document.
The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC Co., Ltd.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
Trademarks
Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft
and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks
of their respective holder.

PT-S959W10 User’s manual iii
Table of Contents
Check Your Package................................................................................................................................i
Copyright.................................................................................................................................................ii
Trademarks..............................................................................................................................................ii
Table of Contents ...................................................................................................................................iii
1. INTRODUCTION 1
About the Product ...................................................................................................................................1
Features.............................................................................................................................................1
Supported OS ...................................................................................................................................2
Customer Support....................................................................................................................................3
Web Site ...........................................................................................................................................3
Limited One-Year Warranty...................................................................................................................3
How to Obtain Service............................................................................................................................3
Liability ...................................................................................................................................................3
Safety Precautions...................................................................................................................................4
Safety Information ...........................................................................................................................4
Caution on the PT-S959 Series........................................................................................................4
2. SYSTEM REFERENCE 9
Specification............................................................................................................................................9
Power Management Features................................................................................................................13
Power Requirements .............................................................................................................................13
Power Consumption.......................................................................................................................13
Physical Dimensions.............................................................................................................................14
3. HARDWARE SETUP 15
Before Using the Product for the First Time........................................................................................15
Hardware Setup.....................................................................................................................................16
Attaching the CFast Attachment Fittings......................................................................................16
Attaching the HDD ........................................................................................................................16
Attaching the FG............................................................................................................................17
Fastening the Cable........................................................................................................................17
Hardware Setup..............................................................................................................................18
Installation Requirements..............................................................................................................19
4. EACH COMPONENT FUNCTION 21
Component Name..................................................................................................................................21
Front view Bottom view ............................................................................................................21

iv PT-S959W10 User’s manual
System Configuration............................................................................................................................22
Component Function .............................................................................................................................23
LED: POWER, ACCESS, STATUS .............................................................................................23
DC Power Input Connector : DC-IN .............................................................................................23
Power switch: POWER SW...........................................................................................................24
Line out Interface: LINE OUT.......................................................................................................24
Mic in Interface: MIC.....................................................................................................................24
USB Ports: USB .............................................................................................................................24
Giga bit-Ethernet: LAN A – B.......................................................................................................25
Serial Port Interface: SERIAL A - B .............................................................................................26
DVI Interface: DVI.........................................................................................................................27
CFast Card Connector: CFast 1 .....................................................................................................29
Serial-ATA: S-ATA .......................................................................................................................30
5. BIOS SETUP 31
Introduction............................................................................................................................................31
Starting Setup.........................................................................................................................................31
Using Setup.....................................................................................................................................32
Getting Help....................................................................................................................................32
In Case of Problems........................................................................................................................32
A Final Note about Setup...............................................................................................................32
Main Menu.............................................................................................................................................33
Setup Items .....................................................................................................................................33
Main .......................................................................................................................................................34
Advanced ...............................................................................................................................................35
PCI Subsystem Settings .................................................................................................................36
ACPI Settings .................................................................................................................................37
CPU Configuration.........................................................................................................................38
IDE Configuration..........................................................................................................................39
USB Configuration.........................................................................................................................40
Super I/O Configuration.................................................................................................................41
Serial Port A Configuration ...........................................................................................................42
Serial Port B Configuration............................................................................................................43
Hardware Monitor ..........................................................................................................................44
Chipset ...................................................................................................................................................45
Host Bridge.....................................................................................................................................46
Memory Frequency and Timing ....................................................................................................47
Intel IGD Configuration.................................................................................................................48
South Bridge...................................................................................................................................49
TPT Devices ...................................................................................................................................51
Boot........................................................................................................................................................53
Security ..................................................................................................................................................54
Save & Exit............................................................................................................................................55

PT-S959W10 User’s manual v
POST Beep ............................................................................................................................................58
6. APPENDIX 59
Memory Map.........................................................................................................................................59
I/O Port Addresses ................................................................................................................................60
Interrupt Level List ...............................................................................................................................61
POST Codes ..........................................................................................................................................62
SERIAL I/O Address and Register Function.......................................................................................65
Watch-Dog-Timer.................................................................................................................................71
Battery ...................................................................................................................................................75
7. LIST OF OPTIONS 77

vi PT-S959W10 User’s manual

1. Introduction
PT-S959W10 User’s manual 1
1. Introduction
About the Product
This product is a fanless PANEL-PC for embedded use based on Intel (R) Atom processor D2550 and a
NM10 chipset. Adoption of the long life power saving LED and Intel (R) Atom processor offers low
power consumption while ensuring sufficient performance.
The “resource-saving PC” contributes downsizing and power-saving of equipment to reduce your running
cost and to promote energy efficiency.
It has extended interfaces such as 1000BASE-T, USB2.0, and serial.
CPU and chipset are embedded type with which this product could be reliable to use because of stable
supply.
This product is available in the following 2 models:
- Base model and panel mount type equipped with Intel Atom Processor D2550 1.86GHz
PT-S959W10-DC6000 (10.1-inch touch panel, LCD (WSVGA), Memory 2GB,
without OS / CFast / 2.5-inch HDD)
- HDD installed model and panel mount type equipped with Intel Atom Processor D2550 1.86GHz
PT-S959W10-DC6100 (10.1-inch touch panel, LCD (WSVGA), Memory 2GB,
without OS / CFast, with 2.5-inch HDD)
Features
- High definition supported DVI external display output
This product has the up to 1920 x 1200 pixels DVI external display output as standard feature. A
stand-alone two-display application which, for example, displays the screen on a big LCD TV separately
from the main LCD, can be built. Also, with the accompanying analog RGB (15 pin HD-SUB)
conversion adapter, connecting to an analog RGB display is supported.
- Remote power management function to reduce operation tasks
This product supports timed/automated system start-up (Resume By Alarm). For example, it enables
unattended operation, such as starting to show information of an establishment in unison at opening time.
Also, it supports system start-up externally via network (Wake On LAN) and modem (Power On by Ring).
It encourages significant labor saving in operation.
- Major types of peripherals are supported with rich interfaces including the one CFast card slots
It has a variety of extended interface such as 1000BASE-T x 2, USB2.0 x 4, serial x 2, CFast card slot x 1.
The case also houses a 2.5-inch SATA drive bay for easy disk replacement.
- Falling-off prevention tools and cable clamps provided to avoid trouble caused by disconnected cable
This product stays trouble-free, being equipped with USB removal prevention fitting and cable clamp for
connectors with no locking mechanism, such as USB cable, and with hardware to properly mount and
avoid falling out of CFast card.
- A wide range of power supplies (10.8 - 31.2VDC) supported
As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power
environments. The separately available AC adapter adds support for 100VAC power.

1. Introduction
2PT-S959W10 User’s manual
- Touch panel enables keyboard-less operation.
These products have analog touch panel enabling mouse emulation using driver software.
Supported OS
- Windows 7 Professional

1. Introduction
PT-S959W10 User’s manual 3
Customer Support
CONTEC provides the following support services for you to use CONTEC products more efficiently and
comfortably.
Web Site
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
Latest product information
CONTEC provides up-to-date information on products.
CONTEC also provides product manuals and various technical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.
Limited One-Year Warranty
CONTEC products are warranted by Contec Co., Ltd. to be free from defects in material and
workmanship for up to one year from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the original
invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office, from
which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original products. The warranty is not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in
which case repairs will be considered beyond the warranty policy.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be
liable for any incidental or consequential damages due to such defect or consequences that arise from
inexperienced usage, misuse, or malfunction of this device.