Converters.TV CVSD-41AR User manual

4-in 1-out Video/SVideo
Switcher w/RS232 ID# 600
Operation Manual

Introduction
The 4-in 1-out Video/SVideo Switcher w/RS232 is designed for switching
between video & S-video sources. Such as VCR, V player... to share one TV
display.
Features
- LED indicators.
- IR remote control
- Support standard video sources: 480i, 57 i.
- Plug and play, easy to install and operate.
- CVSD-41AR can be controlled either through input selection button on
the front panel or using included infrared remote control.
- RS-232 interface allows control from a distant device.
-Ideal for presentation and large shop integration.
-Support audio format: L/R (analog) or PC AMP speaker system (option)
Operation
Controls and
Functions
Front Panel
1. Power indicator LE .
2. Power ON/OFF switch: Push the button to turn ON/OFF the power.
3. IR sensor: Infrared remote control sensor.
4. Input 1 indicator LE .
5. Input 1 switch: Push the button, LE lights up, source 1 is selected.
6. Input 2 indicator LE .
7. Input 2 switch: Push the button, LE lights up, source 2 is selected.
. Input 3 indicator LE .
9. Input 3 switch: Push the button, LE lights up, source 3 is selected.
10. Input 4 indicator LE .
11. Input 4 switch: Push the button, LE lights up, source 4 is selected.

Rear Panel
1. RS-232: 9-pin -sub female connector for connecting to your other
control console for remote control.
2. CV/SV+Audio output:
Use a CV/SV cable to connect to your display.
Use a 1 RCA to 1 RCA video cable to your display.
Use a 2 RCA to 2 RCA audio cable to your display.
(Option) connects to your PC AMP speaker systerm.
3. CV/SV + Audio input 4: Use a CV/SV cable to connect to your
source 4.
4. CV/SV + Audio input 3: Use a CV/SV cable to connect to your
source 3.
5. CV/SV + Audio input 2: Use a CV/SV cable to connect to your
source 2.
6. CV/SV + Audio input 1: Use a CV/SV cable to connect to your
source 1.
7. C power jack : 5V1A power input ,center +.
Remote Control
1. Power: Switch between power ON
and Standby.
2. Press button 1 to select source 1.
3. Press button 2 to select source 2.
4. Press button 3 to select source 3.
5. Press button 4 to select source 4.
Note: Replacement battery can be
found at a local electronic retail store.

Connection and
Installation
CVSD-41AR RS-232 Remote Control Protocol
* The connection between CVS -41AR and remote controller with RS-232 modem cab
Pins definition of modem cable
* RS-232 transmission format:
Baud Rate : 9 00 bps
Data Bit : 8 Bits
Parity: None
Stop Bit: 1 bit

Specifications